Toa DP-K1 Guida utente
SOFTWARE SETUP MANUAL
DIGITAL AUDIO PROCESSOR DP-K1
(Version 1.05)
Thank you for purchasing TOA's Digital Audio Processor.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
[Instruction manual configuration]
Operating Instructions
(separately attached) Describes how to operate, install, and connect the DP-K1.
Software Setup Manual
(this document)
Describes the details of signal processing functions and
how to set the functions using the setting software, and
update the firmware.
This book supports the following
software versions.
Firmware:
Version 2.00 or later
DP-K1 setting software:
Version 2.00 or later
2
TABLE OF CONTENTS
1. GENERAL DESCRIPTION OF THE DP-K1 SETTING SOFTWARE ....... 5
2. INSTALLATION ......................................................................................................... 6
3. STARTING THE SOFTWARE ............................................................................... 9
4. MAIN SCREEN ........................................................................................................ 10
4.1. Menu Term Description
4.1.1. File ................................................................................................................11
4.1.2. Edit ............................................................................................................... 11
4.1.3. View ............................................................................................................. 11
4.1.4. Unit ............................................................................................................... 11
4.1.5. Memory ........................................................................................................ 12
4.1.6. Remote ......................................................................................................... 12
4.1.7. Option ........................................................................................................... 12
4.1.8. Help .............................................................................................................. 12
5. CONFIGURATION SETTINGS
5.1. Unit Configuration Settings ..................................................................................... 13
5.2. Deleting the Unit ..................................................................................................... 18
5.3. Changing the Unit Configurations .......................................................................... 18
5.4. Changing the Zone Settings ................................................................................... 18
5.5. Changing the Crossover Combinations .................................................................. 18
5.6. Changing the Crossover Slopes ............................................................................. 18
5.7. Confirming the Slot Information .............................................................................. 19
5.8. Changing Equipment Names ................................................................................. 20
5.9. Storing the Configuration as a Template ................................................................ 20
5.10. Storing the Crossover Settings as a Template ....................................................... 20
6. UNIT VIEW ................................................................................................................ 21
7. MEMORY VIEW ....................................................................................................... 22
8. FLOW VIEW ............................................................................................................. 23
9. CONTENTS VIEW
9.1. Microphone/Line Input Module View
(Available only when the D-921E or D-921F is used) ............................................. 24
9.2. Digital Input Module View (Available only when the D-923AE is used) .................. 25
9.3. Stereo Input Module View (Available only when the D-936R is used) ................... 26
9.4. Digital Input Module View (Available only when the D-937SP is used) .................. 27
9.5. Gain View (Gain Settings) ...................................................................................... 28
9.6. Filter View (Filter Function Settings) ....................................................................... 30
9.7. Comp/Gate View (Compression/Noise Gate Function Settings) ............................ 33
9.8. Matrix/Zone Assignment View
(Bus Assignment and Crosspoint Gain Setting) ..................................................... 35
9.9. ARC View (ARC Function Setting) ......................................................................... 37
3
9.10. Xover View (Crossover Function Settings)
9.10.1. Crossover function settings ........................................................................ 40
9.10.2. Time correction settings between Xover boxes ......................................... 42
9.11. Delay View (Delay Function Settings) .................................................................... 44
10. RESPONSE VIEW
10.1. Output Response View ......................................................................................... 46
10.2. Xover Response View .......................................................................................... 47
11. ARC MEASUREMENT VIEW AND MEASURING PROCEDURES
11.1. ARC Measurement View ...................................................................................... 49
11.2. Measuring Procedures ......................................................................................... 51
11.3. Operation When the ARC Boxes are Grouped .................................................... 54
11.4. Export ................................................................................................................... 55
12. SETTING AND CANCELING GROUPING
12.1. Setting a Group .................................................................................................... 56
12.2. Canceling Grouping ............................................................................................. 57
13. PRESET MEMORY SETTINGS
13.1. Recalling the Preset Memory ............................................................................... 58
13.2. Writing Data into the Preset Memory ................................................................... 58
13.3. Changing the Name ............................................................................................. 58
14. LEVEL MONITOR VIEW ....................................................................................... 59
15. MUTE ALL WINDOW ............................................................................................ 60
16. COMMUNICATIONS
16.1. Connections ......................................................................................................... 61
16.2. Method to Enable Communications between the PC and the Unit ...................... 62
16.3. Making Communications After Performing Network Settings
16.3.1. Connection settings .................................................................................. 63
16.3.2. Making communications with the target unit designated
in the connection setting .......................................................................... 69
16.4. Making Communications without Performing Network Settings
(Simple Connection) ............................................................................................. 78
17. PRINTING THE SETTING DATA ....................................................................... 83
18. SECURITY SETTINGS
18.1. Enabling the User Level ....................................................................................... 84
18.2. Logging on When the User Level is Enabled ....................................................... 85
18.3. Restriction Settings
18.3.1. Operations that can be restricted ............................................................. 86
18.3.2. Performing restricted settings .................................................................. 86
19. SETTINGS REQUIRED WHEN THE D-981 OR D-983 IS USED
19.1. Outline of the D-981 and D-983 ........................................................................... 88
19.2. Contact Input Setting Screen ............................................................................... 88
4
19.3. Contact Input Function Assignment
19.3.1. Memory selection ..................................................................................... 89
19.3.2. Output volume adjustment ....................................................................... 90
19.3.3. Output mute function ................................................................................ 91
19.4. Contact Output Setting Screen ............................................................................ 92
19.5. Contact Output Function Assignment
19.5.1. Memory selection ..................................................................................... 93
19.5.2. Contact input status ................................................................................. 93
20. VIEW DISPLAY SWITCHING (SUPPLEMENT)
20.1. Docking Displays .................................................................................................. 94
20.2. Floating Displays .................................................................................................. 95
21. FIRMWARE UPDATE
21.1. Confirming the Unit's Firmware Version on the PC .............................................. 96
21.2. Updating Firmware ............................................................................................... 97
22. SPECIFICATIONS
22.1. Software Specifications ........................................................................................ 99
22.2. Communication Specifications ............................................................................. 99
22.3. Setting Items and Setting Ranges
22.3.1. Settings when the D-921E or D-921F is used .......................................... 99
22.3.2. Settings when the D-936R is used ........................................................... 99
22.3.3. Settings when the D-937SP is used ......................................................... 99
22.3.4. Signal processing box .............................................................................. 99
22.3.5. Settings when the D-981 or D-983 is used ............................................ 101
5
1. GENERAL DESCRIPTION OF THE DP-K1 SETTING SOFTWARE
The DP-K1 Setting Software performs settings for the following acoustic signal processing functions and the
modules built in the DP-K1 (hereinafter referred to as "unit"). To use the software, install it on the PC that
meets the requirements described here.
• Automatic resonance control (ARC) function
• Compressor function
• Noise gate function
• Filter function
• Crossover function
• Delay function
Settings can be performed regardless of whether the PC and the unit are in communication (online) or not
(offline). However, some operation or display is enabled only online such as automatic creation of sound field
correction filters (ARC function), ARC measurement, Level monitor view, and Mute all window.
The PC communicates with the unit via a network. While they are online, the PC can remotely control preset
memory recall and settings of acoustic signal processing functions on the unit in real time.
This software runs on the operating systems of Microsoft Windows 2000 and Windows XP.
A PC with a display set at high color (16 bits) or higher is recommended for use with this software.
Note
Windows is the trademark of Microsoft Corporation.
6
2. INSTALLATION
Terminate all other application programs in operation before installation.
Follow the procedures below to install.
Step 1. Insert the supplied CD disk into the PC's CD drive.
Step 2. Open the CD drive from the Explorer or My Computer.
Step 3. Open the [English] folder.
The [English] folder, [Japanese] folder, and other contents are displayed.
7
Step 5. Double-click the DPK1_PCvxxx_fxxx_e.exe* file.
* The software version number can be confirmed at the xxx indication.
For example, when the PC Setting Software version is 1.00 and Firmware version is 1.01, it is
indicated as "DPK1_PCv100_f101_e.exe."
The following window is displayed.
Step 6. Check the contents of the window, then press the [Next] button.
The following window is displayed.
Step 4. Open the [DPK1_Software] folder.
8
Step 8. Start installation according to the instructions on the screen.
Step 9. Press the [Finish] button after installation completion.
The shortcut icon for the DACsys for DP-K1 executable file is stored in the PC's start menu .
[Version update information]
• Download our TOA Products Data, web site (http://www.toa-products.com/international/) to get the up-to-
date version for the DP-K1 Setting Software and software setting instructions.
• The software version number can be confirmed using the Help menu.
• The software version which this manual supports is on the first page, and the manual preparation date at the
lower right corner of the last page.
(Example) Prepared in May 2006: Indicated as "200605"
Step 7. If necessary, change the folder into which the software will be installed, then press the [Next] button.
The following window is displayed.
9
3. STARTING THE SOFTWARE
The following two different methods are available for starting the installed DP-K1 Setting Software:
(1) Starting from the [Start] button
You can start the DP-K1 Setting Software from the start menu.
Press the [Start] button on the PC's desktop, and select [Programs TOA Digital Audio Control DACsys
for DP-K1] to start.
(2) Starting from the shortcut icon
Holding down the [Ctrl] key, drag "DACsys for DP-K1" icon created in the software installation folder to the
desktop to copy.
Double-click this icon to start the software.
Altri manuali per DP-K1
3
Indice
Altri manuali Toa Hardware per computer
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
