Toa N-XC65-W Manuale utente

Altri manuali per N-XC65-W

2

Manuali Sistema di interfono popolari di altre marche

Bticino

Bticino LINEA 3000 Manuale utente

MSI

MSI MSI-140 Manuale utente

golmar

golmar Stadio Plus Manuale utente

CyberData

CyberData 011211 series Manuale

Vidos

Vidos duo M1021 Manuale utente

Vimar

Vimar ELVOX 7539/E Manuale utente

SSS Siedle

SSS Siedle BTSV 850-03 Manuale utente

Dahua

Dahua VTO Series Manuale utente

Elvox

Elvox 5651 Manuale utente

Videx

Videx VIDEOKIT Series Manuale utente

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuale utente

Viking

Viking E-35-EWP Manuale utente

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuale utente

SSS Siedle

SSS Siedle BFCV 850 Series Manuale utente

GRD

GRD MAX V2 Manuale utente

Alecto

Alecto ADI-250 Manuale utente

Aiphone

Aiphone IE-8MD Manuale utente

Perel

Perel EDB4 Manuale utente

TOA Canada Corporation

INSTALLATION MANUAL

IP Audio Window Intercom Kit N-XC65-W

1. INTERFACE DESCRIPTION

A. Internal Window Intercom Module

【Front】【Side】【Interface line】

①Network status indication: red light for

offline and green light for online.

②Gooseneck microphone socket: plug the

gooseneck microphone and fix the screw.

③Loudspeaker: amplify the audio from the

external window intercom.

④Voice Broadcast button:

When the intercom button ⑥is ON (blue

light ON):

•Short press to broadcast "Hello,

welcome" message.

•Long press (1 second) to broadcast

"Thank you, welcome next time".

The broadcast button flashes green during

broadcasting.

⑤Remote Intercom button: when the

terminal is connected to the server, press

the button to make a call to the supervisor

intercom terminal specified by the server.

⑥Intercom button: press the button to

communicate with the external window

intercom, finish the conversation by

pressing the button again. The intercom

button light blue during conversation.

①

Scene mode adjustment

switch:

Three scene modes are available:

•Noisy (to the front)

•Standard (in the middle）

•Quiet (to the back)

Standard is the default mode.

①

Power interface: connect with

12V/1.5A power.

②Network interface: connect

the cable to the switch.

③Analog audio output

interface: Connect to a DVR or IP

camera.

④External window intercom

interface connection.

Notes: please refer to the User Manual for more detailed information.

TOA Canada Corporation

B. External Window Intercom Module

①Loudspeaker/MIC：

Loudspeaker: amplify the audio from the Internal Window Intercom module.

Microphone: pick up the audio at the External Window Intercom module.

②Connector to the Internal Window Intercom module.

2. CONNECTION DIAGRAM

3.APPEARANCE

TOA Canada Corporation

4. SPECIFICATIONS

Power Supply

DC 12V 1.5A

Consumption

≤ 5W

Network Protocol

TCP/IP, UDP, ARP, ICMP, IGMP, FTP

Audio Code

PCM/AAC

Audio Sampling

8 KHz – 32 KHz

S/N

> 90 dB

Frequency Response

20 Hz – 16 KHz

Interface

1x RJ45, 1x Power Supply, 1x External Unit,

1x Rec Out

Working Temperature

-20℃- 60℃

Humidity

≤ 90% RH (Not condensing)

Dimensions

Internal Unit 160 x 95 x 46.5 mm

External Unit 83 x 24 mm

Weight

Internal Unit 0.44 Kg

External Unit 0.2 Kg

5. INSTALLATION

First, put the internal window intercom in a suitable place (please refer to the installation manual).

Fix the external window intercom, tear off the 3M glue protective layer at reverse side, then paste the

external window intercom on the glass (At the same time, the bushings in the attachment can be

inserted into the interface above the outer wire, and then the EV cotton can be used to paste the

protective wire sleeve vertically on the glass to avoid loosening the interface due to the wire pulling).

Connect the internal window intercom with the external window intercom according to the connection

diagram.