Toa C-CC364 NT Guida utente

Thank you four purchasing TOA’s Color Camera. Please carefully follow the instructions in this manual to

ensure long, trouble-free use of your equipment.

COLOR CAMERA C-CC364 NT

Camera settings can be performed using the camera’s menu key. They can be also performed

remotely in combination with the C-RU10 Camera Remote Unit.

This manual describes the setup steps of the unit.

SETUP MANUAL

TABLE OF CONTENTS

1. SETTING ITEM GUIDE .................................................................................... 3

2. CONNECTIONS ................................................................................................. 4

3. FUNCTION SETTINGS

3.1. About Camera Settings ................................................................................... 5

3.2. About Camera Menu Screen .......................................................................... 6

3.3. Iris Level (Brightness) Settings ....................................................................... 7

3.4. Shutter Speed Setting ..................................................................................... 7

3.5. White Balance Setting ..................................................................................... 8

3.6. Chroma Setting ............................................................................................... 9

3.7. Enhancer (Picture quality) Setting .................................................................. 9

3.8. AGC Setting .................................................................................................. 10

3.9. Slow Shutter (Sensitivity up) Setting ............................................................. 10

3.10. Day & Night Setting (B&W mode) ................................................................. 11

3.11. Backlight Compensation Setting ................................................................... 13

3.12. Privacy Masking Setting ................................................................................ 15

3.13. Electronic Zoom Setting ................................................................................ 15

3.14. Reverse Setting ............................................................................................ 15

3.15. Camera ID Setting ........................................................................................ 16

3.16. Alarm Output Setting ..................................................................................... 18

3.17. Resetting Camera Settings ........................................................................... 19

IRIS (P. 7)

SHUTTER SPEED (P. 7)

WHITE BALANCE (P. 8)

ENHANCER (P. 9)

AGC (P. 10)

SLOW SHUTTER (P. 10)

BACKLIGHT (P. 13)

E–ZOOM (P. 15)

REVERSE (P. 15)

CAMERA ID (P. 16)

ALARM OUTPUT (P. 18)

PRESET (P. 19)

MANUAL, PATTERN 1, 2 (P. 13)

WIDE DYNAMIC (P. 14)

CHORMA

PRIVACY MASK (P. 15)

[ Setting Item ]

CAMERA MENU 1/2

Sets the camera image's iris. (Iris level setting)

Sets the shutter speed.

Sets the ATW, AWB or MANUAL.

Sets the enhancer (Picture quality).

Sets the chroma.

Sets the AGC.

Sets the slow shutter (Sensitivity up).

Sets the backlight compensation.

Sets the masking area.

Sets the electronic zoom area (X2).

Sets the horizontal/ vertical displayed image reverse.

Sets the camera title.

Sets the alarm.

Returns each item on the camera setting screen to the

factory-preset status.

Sets the backlight compensation area.

Sets the wide dynamic area.

CAMERA MENU 2/2

MOTION DETECTION (P. 18)Sets the motion detection.

[Setting Contents ]

EXTERNAL (P. 18)Sets the external alarm input.

(P. 9)

LENS SELECT (P. 7)Sets the lens type.

DAY/ NIGHT (P. 11)Sets the Day/ Night (B&W mode)

1. SETTING ITEM GUIDE

Camera menu screens are composed of the screens that display the setting items below.

•Connection example 2: When the C-RU10 is used

Monitor

: BNC plug (optional)

Camera Remote Unit

C-RU10

Connect to 12 V DC

or 24 V AC

Camera

C-CC364

Note: For detailed connections, refer to the operating manual enclosed with the Camera Remote Unit.

•Connection example 1

Monitor

: BNC plug (optional)

Connect to 12 V DC

or 24 V AC

Camera

C-CC364

2. CONNECTIONS

Menu key

Clear key

12V

24V COM

COM

DAY/NIGHT

ALARM

CLEAR

1/100

INT

1/60

F.ADJ

OFF ON

V-PHASE

VIDEO OUT

3. FUNCTION SETTINGS

3.1. About Camera Settings

The following 2 different methods are available for setting the camera.

•Performing settings at the camera

C-CC364

CLEAR

F. ADJ

1/ 60, 1/ 100

INT, LL

OFF

Function operation/ Model

Down

Left

Right

Clear

Turn on

Turn off

Focus adjustment

Flickering-reduction

Synchronization

Use the Menu and Clear keys to perform camera settings.

•Holding down the Menu key for 2 seconds or more displays the Camera menu screen.

•Use the menu keys to move the cursor left and right or up and down.

•Press the menu key to confirm each setting.

•Pressing the Clear key returns the display to the previous screen. (The arrow moves to the right only on the

Camera ID setting screen 2.)

•To exit the Camera menu screen, hold down the Clear key for 2 seconds or more.

Note: Refer to operation indications listed in the table below.

[About switch settings]

The following switches are provided on this camera.

Focus adjustment switch, Flickering-reduction switch, Synchronization switch , Synchronization position switch

Notes

•When you shift the Focus adjustment switch to "ON" position, "IN ADJUSTMENT" is displayed on the

screen, disabling menu item settings.

•When you shift the Flickering-reduction switch to "ON" position, the shutter speed is set for "1/ 100."

AMERA REM

NIT

-R

CABLE LENGTH SET CLEAR MENU POWER

Key Set, Clear, Menu keys

•Performing settings using the C-RU10 Camera Remote Unit

Setting can be performed using the Camera Remote Unit.

Use the Menu key, Clear key, Set key, and keys on the C-RU10 to perform camera settings.

•Pressing the Menu key displays the Camera menu screen.

•Use the keys to move the cursor left and right or up and down.

•Press the Set key to confirm the setting.

•Pressing the Clear key returns the display to the previous screen. (The arrow moves to right only on the

Camera ID setting screen 2.)

•To exit the Camera menu screen, press the Menu key on the Camera menu screen.

Note: For detailed settings, refer to the operating manual enclosed with the Camera Remote Unit.

3.2. About Camera Menu Screen

Camera Menu setting can be performed individually on the

Camera menu screen.

•Camera Menu screen (Menu screen)

1. Hold down the Menu key for 2 seconds or more to enter

the Camera menu screen.

2. Tilt the menu key to up or down to select the desired item.

Note

The cursor position is indicated by the reversed character

on the Camera menu screen.

3. Press the Menu key to confirm the setting.

Selected setting screen is displayed.

Note

The Camera menu screen is divided into pages 1 and 2.

To open page 2, press the "NEXT PAGE" on page 1.

4. To exit the Camera menu screen, hold down the Clear

key for 2 seconds or more.

I R I S

S H U T T E R S P E E D

W H I T E B A L A N C E

C H R O M A

E N H A N C E R

A G C

S L O W S H UT T E R

D AY / N I G H T

N E X T P A G E

P A G E (1 / 2 )

L E V E L 0

P E A K

N O R M A L

T W

N O R M A L

A U T O M A X + 1

M A X X 6

O F F

B A C K L I G H T

P R I V A CY M A S K

E – Z O O M

R E V E R S E

C A M E R A I D

A L A R M O U T P UT

P R E S E T

P R E V I O U S P A G E

P A G E (2 / 2 )

O F F

H O F F V

M O T

X T

Menu screen, page 1

Menu screen, page 2

The area on the screen indicates the

cursor position.

•Iris setting screen

1. Select "IRIS" on the Menu screen (page 1), then press the

Menu key.

The indicator for "LOW" – "HIGH" is reverted.

Note

When using a video input type lens or a manual lens, first

perform settings for "LENS SELECT" before "IRIS

LEVEL" settings.

2. Tilt the Menu key to the left or right to move the

indicator to the position that sets the screen brightness to

an optimum level.

3. Press the Menu key to confirm the level setting.

The indicator for "AVG" – "PEAK" is reverted.

4. Tilt the Menu key to the left or right to move the indicator

to select either "AVG" or "PEAK" position.

•AVG: Permits averaging metering of the brightness of

the entire screen. (Normally "AVG" position is

used.)

• PEAK: Permits metering by focusing on the brightest

spot of the scene.

5. Press the Menu key to confirm the setting.

The " " indicator moves to "LENS SELECT" Pressing

the Menu key again returns the display to the Menu

screen.

I R I S

I R I S L E V E L

L O W

H I G H

P E A K

– – – – – – – + – – – – – – –

– – – – – – –

–

– – – – – – –

L E N S S E L E C T D C

V I D E O

M A N U A L

3.3. Iris Level (Brightness)Settings

You can perform iris level setting (brightness)of a subject.

Iris setting screen

•Shutter speed setting screen

1. Tilt the Menu key up or down to move the " " indicator

to select the shutter speed.

Note

When you shift the Flickering-reduction switch to "ON"

position, " " indicator (shutter speed)is set for 1/100.

When "MANUAL" (manual iris)is selected on the "LENS

SELECT" screen, the shutter speed is set for AES.

2. Press the Menu key to confirm the setting. Pressing the

Menu key returns the display to the Camere menu screen.

S H U T T E R S P E E D N O R M A L

1 / 1 0 0

1 / 1 2 5

1 / 2 5 0

1 / 5 0 0

1 / 1 0 0 0

1 / 2 0 0 0

1 / 4 0 0 0

1 / 1 0 0 0 0

3.4. Shutter Speed Setting

You can set the shutter speed to NORMAL (1/60), 1/100, 1/125, 1/250, 1/500, 1/1000, 1/2000, 1/4000, or

1/10000.

Shutter speed setting screen

•When AWB is selected

1. Tilt the Menu key up or down to move the " "indicator

to select "REFRESH" or "LAST."

2. Press the Menu key to confirm the setting.

2-1 When "LAST" is selected

The indicator for "RED" – "BLUE" is reversed without

refreshing the white-balance.

Tilt the Menu key to the left or right to move the

indicator to set the reference white-balance color.

Pressing the Menu key confirms the selection and

returns the display to the Menu screen.

2-2 When "REFRESH" is selected

The "WAIT" indication flashes for 4 – 5 seconds to

refresh the white balance, and the indicator for "RED"

– "BLUE" is reversed. Tilt the Menu key to the left or

right to move the indicator to set the reference white

balance color. Pressing the Menu key confirms the

setting and returns the display to the Menu screen.

W H I T E B A L A N C E

R E D B L U E– – – – – – – + – – – – – – –

A T W

A W B

M A N U A L

L A S T

R E F R E S H

W A

•When MANUAL is selected

1. Tilt the Menu key to the left or right to move the

indicator for "RED" to set the "RED" level.

2. Press the Menu key to confirm the setting.

The indicator for "BLUE" is reversed.

3. Tilt the Menu key to the left or right to move the

indicator for "BLUE" to set the "BLUE" level.

4. Press the Menu key to confirm the setting.

The display returns to the Menu screen.

W H I T E B A L A N C E

R E D

B L U E

– – – – – – – + – – – – – – –

A T W

A W B

M A N U A L

M A XM I N

AWB setting screen

MANUAL setting screen

W H I T E B A L A N C E

R E D B L U E– – – – – – – + – – – – – – –

A T W

A W B

M A N U A L

1. Tilt the Menu key up or down to move the " "indicator

to select "ATW," "AWB," or "MANUAL."

2. Press the Menu key to confirm the setting.

•When ATW is selected

The indicator for "RED" – "BLUE" is reversed.

Tilt the Menu key to the left or right to move the

indicator to set the reference white balance color. Pressing

the Menu key confirms the selection and returns the

display to the Menu screen.

3.5. White Balance Setting

Three modes are made available for selection: ATW, AWB, MANUAL (Normally ATW mode is used.)

ATW: The camera's white balance varies as the subject's color temperature varies.

AWB: Once the camera's white balance is adjusted during its installation, the camera operates on the

initially set white balance even though the subject's color temperature changes. (Factory default:

about 4900 k)

MANUAL: Adjust the white balance so that the color looks natural when a subject is viewed under a special

light source.

ATW setting screen

•Chroma level setting screen 1

1. Tilt the Menu key up or down to move the " "indicator

to select "NORMAL" or "MANUAL."

2. Press the Menu key to confirm the setting.

•Selecting "NORMAL" returns the display to the Menu

screen.

•Selecting "MANUAL" displays the Chroma level setting

screen 2.

•Chroma level setting screen 2

1. Tilt the Menu key to the left or right to move the

indicator to set the chroma.

2. Press the Menu key to confirm the setting.

The display returns to the Menu screen.

C H R O M A L E V E L N O R M A L

M A N U A L

C H R O M A L E V E L N O R M A L

M A N U A L

M I N M A X– – – – – – – + – – – – – – –

E N H A N C E R N O R M A L

M A N U A L

•Enhancer setting screen 1

1. Tilt the Menu key up or down to move the " " indicator

to select "NORMAL" or "MANUAL."

2. Press the Menu key to confirm the setting.

•Selecting "NORMAL" returns the display to the Menu

screen.

•Selecting "MANUAL" displays the Enhancer setting

screen 2.

•Enhancer setting screen 2

1. Tilt the Menu key to the left or right to move the

indicator to set the contour emphasizing level.

2. Press the Menu key to confirm the setting.

The display returns to the Menu screen.

E N H A N C E R N O R M A L

M A N U A L

S O F T S H A R P

– – – – – – – + – – – – – – –

3.7. Enhancer (picture quality)Setting

The subject’s contour can be enhanced as required.

Chroma level setting screen 1

Chroma level setting screen 2

Enhancer setting screen 1

Enhancer setting screen 2

3.6. Chroma Setting

The subject’s chroma level can be adjusted as required.

•AGC setting screen

1. Tilt the Menu key up or down to move the " " indicator

to select "AUTO," "FIX," or "OFF."

2. Press the Menu key to confirm the setting.

•When "AUTO" is selected, the maximum AGC level

setting is displayed.

•When "FIX" is selected, the AGC level setting is

displayed.

•When "OFF" is selected, the display returns to the Menu

screen.

3. Tilt the Menu key to the left or right to move the

indicator to set the AGC level.

4. Press the Menu key to confirm the setting.

The display returns to the Menu screen.

A G C A U T O

O F F

L O W H I G H– – – – – – – + – – – – – – –

M A X

S L O W S H UT T E R O F F

X 2

X 4

X 6

X 8

X 1 0

X 1 6

X 2 4

X 3 2

X 6 4

M A X

•Slow shutter setting screen

1. Tilt the Menu key up or down to move the " " indicator

to select shutter power.

To reduce afterimage, set the slow shutter power low. To

completely eliminate afterimages, select "OFF" in the

settings.

2. Press the Menu key to confirm the setting.

The display returns to the Menu screen.

Note

The slow shutter function is enabled by making the time

interval required to store light in an imaging device longer

than usual. For this reason, if a subject moves quickly under

dark conditions, a blurred afterimage phenomenon occurs.

3.9. Slow Shutter (Sensitivity up)Setting

Slow shutter power can be set for OFF or through X2 to X64.

3.8. AGC Setting

AGC can be set for "AUTO," "FIX," or "OFF."

AUTO: Automatically adjusts the sensitivity in accordance with the brightness level of an subject in poor

lighting condition

FIX: The gain is always maintained at a set level.

AGC setting screen

Slow shutter setting screen

Altri manuali per C-CC364 NT

Indice

Altri manuali Toa Telecamera di sicurezza

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente