1. This camera can only be set up with 2.4g Wi-Fi network. (It's
ok to use Cell phone 4G data to live viewing it after the camera
was set up with 2.4g Wi-Fi network firstly.)
2. You may possibly need a Wi-Fi extender if your Wi-Fi signal is
weak around the yard where you want to install it.
3. Please format the micro sd card to FAT32 format and install the
card when camera powered off.(Micro sd card is not provided in
the package)
4. Please connect the solar panel to camera and then charge the
camera by connect the USB port in the solar panel or the
camera.it usually takes up to 10-12 hours to fully charge it.
5. Make sure the distance between your phone,router and the
camera is no more than 1.5 feet when you're ready to pair the
camera. Ensure that the Wi-fi signal strength on your phone is
good.
6. The PIR range is 16 feet around,the recommend camera install
height is 8 feet around.To avoid too much false alarms, we
suggest you do not install the camera with nearby bushes,
shrubs, grasses and tree leaves coming into the PIR range.
7. If you install the camera on stucco,brick or concrete surface,
please mark 4 holes matching the bracket and then use a drill
driver to drill into the wall and insert the expansion screws to
hold the amera tightly.
Warm tips before you go:
BeforeInstallation
1
