6
nREMOTE SIGNA TORQUE WRENCH MODE FH256MC
• Adoption of answer back system enables the operator to check the communication status at
hand.
With the conventional model, the communication status must be judged by checking the
receive light or the display on the control device connected to the contact output. The
H256MC adopts the answer back system. Therefore, the operator can check the
communication status by the LED mounted on the transmitter, without checking the receiver
or the control device.
• Reduction of causes of damages
With the conventional model, a lead wire was used for the antenna. The H256MC has a
built-in antenna, which does not cause a breaking of wire. The case made of aluminum is
robust. Unlike a resin case, it does not damage the substrate due to a break of the case.
• Lead switch realizes a long life.
The standard LS torque switch uses a mechanical limit switch. This model adopts a non-
contact lead switch, resulting in a long life.
• Installation on LS torque wrench is possible. (T- H256MCLS)
With the model T- H256MCLS, your LS torque wrench in present use can be easily modified
by using the spacer and the limit switch in the accessories.
• Installation on LS torque wrench is possible. (T- HSLS256)
With the model T- HSLS256, your LS torque wrench in present use can be easily modified.
(Cannot be mounted to the MS type torque wrench, and the SPLS8N and RSPLS8N.)
• The battery life for over 480 thousand shots. Easy to change the battery.
Use of an alkaline battery provides 3600 shots per day for 6 months or more. (The battery life
is about twice longer than that of the conventional model.)
With the conventional model, the transmitter must be removed from the torque wrench when
the battery is changed. With the H256MC, the battery can be easily changed with only the
battery cover removed.
• Use of the universal 2.4 GHz frequency band (ISM band)
The H256MC meets various standards such as TELEC (Technical Regulations Conformity
Certification) in Japan, CC in North America, IC in Canada, EU (R&TTE directive for CE
marking) and SRRC in China, and it can be used in foreign countries without problem.
* Concerning other standards, contact us.
