tojock@126.com
produce heat.
6) Proper ventilation - Do not install this player in a confined space, such as a
bookshelf or similar unit unless proper ventilation is provided. Slots and openings
in the Discs player casing are provided for ventilation to ensure reliable operation
of the product and to protect it from overheating. These openings must not be
blocked or covered. The openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surfaces as ventilation will be
inhibited, and overheating will occur.
7) Overloading - Do not overload wall outlets, extension cords, or integral
convenience receptacles, as this can result in a risk of fire or electric shock.
8) Cleaning - Unplug this product from the wall outlet before cleaning. If dusting
or cleaning is required, be sure to clean the outer portion of the casing only. Do
not attempt to clean the inside or to disassemble the casing. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning and be sure to allow
the unit to dry completely before plugging the unit to a power source.
9) To protect against electric shock do not immerse cord, plugs, or appliance in
water or any other liquid.
10) Close supervision is necessary when your appliance is being used by or near
children.
11) Keep the appliance and its cord out of reach of children aged less than 8
years.
12) If the supplied power cord is damaged, it must be replaced by the
manufacturer, its service agent, or similarly qualified persons in order to avoid a
hazard.
13) Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or is dropped or damaged in any manner. Return
appliance to the nearest authorized service facility for examination, repair, or
electrical or mechanical adjustment.
14) Any use of this product which is not recommended by the manufacturer may
cause injury to persons or damage to the appliance.
15) Place appliance on a flat surface or table. Do not hang its power cord over
the edge of the table or counter. Ensure that the power cord does not touch the
hot surface of the appliance.
