NO.1
Register/Login/Forgot/password
NO.2 Add device-Normal mode
picture 1 picture 2 picture 3
9:41 AM 100%
returnspace123
mnbvcxz
lkjhgfdsa
poiuytrewq
Wi-Fi Airtake-2.4G
picture 1 picture 2
9:41 AM 100%
9:41 AM 100%
If you select normal mode to connect device to the
network, the App goes through the processes as
shown in the picture
1. After the network connection is successfully, the App
page will be shown in the picture 2
Add device-Network connection process
Forgot password
To find your password back, please follow the procedures:
1.Tap“Forgot password”，as shown in the picture 1
2.The system automatically recognises your country /
area.You can also select your country code by yourself.Enter
the mobile number/E-mail and tap “Next”,as shown in the
picture 2
3.nter the verification code in the message/E-mail , as shown
in the picture 3,and enter the new password，tap"Confirm" to
finish.
Sign in with verification code via SMS
1.Tap“Sign in with SMS verification”,to new page
2.The system automatically recognises your country / area.
You can also select your country code by yourself.
3.nter the mobile number and tap“Get” to get a message
4.Enter the verification code in the message and
tap “Login” to login the App
1.nter the App, tap“+”in the upper right of the page to enter network
connection page，as shown in thepicture
2.The APP provides two modes of distribution: default mode and
compatibility mode. Click "compatibility mode" on the "default mode"
page to switch the distribution network mode
3.Please make the default mode network,in standby mode,the
cleaner will press WIFI for 3 seconds ,the cleaner display CF6,and the
cleaner enter the distribution mode.
1.For AP mode, please make sure the device’s indicator light
slowly flashes(1 time every 3 seconds),tap to go on to the next
step
2.If indicator light is slowly flashing, tap “how to set indicator
light as slow flashes” to view operation processes.
Add device-AP mode
Add device-Enter Wi-Fi password
Select the Wi-Fi under which device is working,
enter password and tap “Confirm” to enter
network connection process, as shown in the
picture below
