ToolPRO CMS18G Manuale utente

TOOLPRO

18V compound Mitre saw

Instruction Manual

Important - Please read these instructions fully before operating or maintaining your Mitre saw

These instructions contain important information that will help you get the best from your

Mitre saw, ensuring it remains safe to operate.

If you need help or have damaged or missing parts, call the Customer Helpline on 1300 889 028

After Sales Support

CMS18G

FREE CALL 1300 889 028

EMAIL:salesau@positecgroup.com

Customer Helpline 1300 889 028

Contents

Safety Information.....................................................................................................3

InTheBox..................................................................................................................10

Operating Instructions............................................................................................. 12

Maintenance...........................................................................................................21

Technical data..........................................................................................................21

Customer Helpline 1300 889 028

Safety Information

Important - Please read these instructions fully before starting assembly

Warning Symbols

To reduce the risk of injury, user must read instruction manual

Warning

Wear ear protection Wear eye protection

Wear dust mask RCM marking

Do not dispose of batteries, Return exhausted batteries to your local collection or recycling

point.

Do not burn Do not expose to rain or water

DO NOT STARE INTO BEAM LASER RADIATION

For indoor use only

Fuse

Positive terminal Negative terminal

ABN: Australian Business Number. By this number, business information such as entity

type, status, business location etc. can be found at website http://abr.business.gov.au.

ABN of Positec Australia Pty Limited is 14 101 682 357

Customer Helpline 1300 889 028

WARNING! Read all safety warnings and all instructions. Failure to follow the

warnings and instructions may result in electric shock, ﬁre and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-operated (corded) power tool

or battery-operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools create sparks which may ignite the

dust or fumes.

c) Keep children and bystanders away while operating a power tool. Distractions can

cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not

use any adapter plugs with earthed (grounded) power tools. Unmodiﬁed plugs and

matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,

ranges and refrigerators. There is an increased risk of electric shock if your body is

earthed or grounded.

c) Do not expose power tools to rain or wet conditions. Water entering a power tool will

increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the

power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or

entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension cord suitable for outdoor

use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

f) If operating a power tool in a damp location is unavoidable, use a residual

current device (RCD) protected supply. Use of an RCD reduces the risk of electric

shock.

3) Personal safety

a) Stay alert, watch what you are doing and use common sense when operating a

power tool. Do not use a power tool while you are tired or under the influence of

drugs, alcohol or medication. A moment of inattention while operating power tools

may result in serious personal injury.

b) Use personal protective equipment. Always wear eye protection. Protective

equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection

used for appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in the off-position before

connecting to power source and/or battery pack, picking up or carrying the tool.

Carrying power tools with your ﬁnger on the switch or energising power tools that

have the switch on invites accidents.

Safety Information

Important - Please read these instructions fully before starting assembly

General Power Tool Safety Warnings

Customer Helpline 1300 889 028

d) Remove any adjusting key or wrench before turning the power tool on. A wrench or

a key left attached to a rotating part of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at all times. This enables better

control of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing

and gloves away from moving parts. Loose clothes, jewellery or long hair can be

caught in moving parts.

g) If devices are provided for the connection of dust extraction and collection facilities,

ensure these are connected and properly used. Use of dust collection can reduce

dust-related hazards.

h) Do not let familiarity gained from frequent use of tools allow you to become

complacent and ignore tool safety principles. A careless action can cause severe

injury within a fraction of a second.

4) Power tool use and care

a) Do not force the power tool. Use the correct power tool for your application.

The correct power tool will do the job better and safer at the rate for which it was

designed.

b) Do not use the power tool if the switch does not turn it on and off. Any power tool

that cannot be controlled with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or the battery pack from the power

tool before making any adjustments, changing accessories, or storing power

tools. Such preventive safety measures reduce the risk of starting the power tool

accidentally.

d) Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of moving parts, breakage

of parts and any other condition that may affect the power tool’s operation. If

damaged, have the power tool repaired before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc. in accordance with these

instructions, taking into account the working conditions and the work to be

performed. Use of the power tool for operations different from those intended could

result in a hazardous situation.

h) Keep handles and grasping surfaces dry, clean and free from oil and grease.

Slippery handles and grasping surfaces do not allow for safe handling and control

of the tool in unexpected situations.

5) Battery tool use and care

a) Recharge only with the charger specified by the manufacturer. A charger that is

suitable for one type of battery pack may create a risk of ﬁre when used with another

battery pack.

Safety Information

Important - Please read these instructions fully before starting assembly

General Power Tool Safety Warnings

Customer Helpline 1300 889 028

b) Use power tools only with specifically designated battery packs. Use of any other

battery packs may create a risk of injury and ﬁre.

c) When battery pack is not in use, keep it away from other metal objects, like paper

clips, coins, keys, nails, screws or other small metal objects, that can make a

connection from one terminal to another. Shorting the battery terminals together may

cause burns or a ﬁre.

d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If

contact accidentally occurs, ﬂush with water. If liquid contacts eyes, additionally seek

medical help. Liquid ejected from the battery may cause irritation or burns.

e) Do not use a battery pack or tool that is damaged or modified. Damaged or modiﬁed

batteries may exhibit unpredictable behaviour resulting in ﬁre, explosion or risk of injury.

f) Do not expose a battery pack or tool to fire or excessive temperature. Exposure to ﬁre

or temperature above 130 °C may cause explosion.

g) Follow all charging instructions and do not charge the battery pack or tool outside

the temperature range specified in the instructions. Charging improperly or at

temperatures outside the speciﬁed range may damage the battery and increase the risk

of ﬁre.

6) Service

Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

Safety Information

Important - Please read these instructions fully before starting assembly

General Power Tool Safety Warnings

a) Mitre saws are intended to cut wood or wood-like products, they cannot be used with

abrasive cut-off wheels for cutting ferrous material such as bars, rods, studs,etc.

Abrasive dust causes moving parts such as the lower guard to jam. Sparks from abrasive

cutting will burn the lower guard, the kerf insert and other plastic parts.

b) Use clamps to support the workpiece whenever possible. If supporting the workpiece

by hand, you must always keep your hand at least 100 mm from either side of the saw

blade. Do not use this saw to cut pieces that are too small to be securely clamped or

held by hand. If your hand is placed too close to the saw blade,there is an increased risk

of injury from blade contact.

c) The workpiece must be stationary and clamped or held against both the fence and

the table. Do not feed the workpiece into the blade or cut “freehand” in any way.

Unrestrained or moving workpieces could be thrown at high speeds, causing injury.

d) Push the saw through the workpiece. Do not pull the saw through the workpiece. To

make a cut, raise the saw head and pull it out over the workpiece without cutting, start

the motor, press the saw head down and push the saw through the workpiece. Cutting

on the pull stroke is likely to cause the saw blade to climb on top of the workpiece and

violently throw the blade assembly towards the operator.

e) Never cross your hand over the intended line of cutting either in front or behind the

saw blade. Supporting the workpiece “cross handed” i.e. holding the workpiece to the

right of the saw blade with your left hand or vice versa is very dangerous.

f) Do not reach behind the fence with either hand closer than 100 mm from either side

of the saw blade, to remove wood scraps, or for any other reason while the blade is

spinning. The proximity of the spinning saw blade to your hand may not be obvious and

Safety instructions for mitre saws

Customer Helpline 1300 889 028

Safety Information

Important - Please read these instructions fully before starting assembly

Safety instructions for mitre saws

you may be seriously injured.

g) Inspect your workpiece before cutting. If the workpiece is bowed or warped, clamp

it with the outside bowed face toward the fence. Always make certain that there is no

gap between the workpiece, fence and table along the line of the cut. Bent or warped

workpieces can twist or shift and may cause binding on the spinning saw blade while

cutting. There should be no nails or foreign objects in the workpiece.

h) Do not use the saw until the table is clear of all tools, wood scraps, etc., except for

the workpiece. Small debris or loose pieces of wood or other objects that contact the

revolving blade can be thrown with high speed.

i) Cut only one workpiece at a time. Stacked multiple workpieces cannot be adequately

clamped or braced and may bind on the blade or shift during cutting.

j) Ensure the mitre saw is mounted or placed on a level, firm work surface before use. A

level and ﬁrm work surface reduces the risk of the mitre saw becoming unstable.

k) Plan your work. Every time you change the bevel or mitre angle setting, make sure

the adjustable fence is set correctly to support the workpiece and will not interfere

with the blade or the guarding system. Without turning the tool “ON” and with no

workpiece on the table, move the saw blade through a complete simulated cut to assure

there will be no interference or danger of cutting the fence.

l) Provide adequate support such as table extensions, saw horses, etc. for a workpiece

that is wider or longer than the table top. Workpieces longer or wider than the mitre

saw table can tip if not securely supported. If the cut-off piece or workpiece tips, it can

lift the lower guard or be thrown by the spinning blade.

m) Do not use another person as a substitute for a table extension or as additional

support. Unstable support for the workpiece can cause the blade to bind or the

workpiece to shift during the cutting operation pulling you and the helper into the

spinning blade.

n) The cut-off piece must not be jammed or pressed by any means against the spinning

saw blade. If conﬁned, i.e. using length stops, the cut-off piece could get wedged against

the blade and thrown violently.

o) Always use a clamp or a fixture designed to properly support round material such as

rods or tubing. Rods have a tendency to roll while being cut, causing the blade to “bite”

and pull the work with your hand into the blade.

p) Let the blade reach full speed before contacting the workpiece. This will reduce the

risk of the workpiece being thrown.

q) If the workpiece or blade becomes jammed, turn the mitre saw off. Wait for all moving

parts to stop and disconnect the plug from the power source and/or remove the battery

pack. Then work to free the jammed material. Continued sawing with a jammed

workpiece could cause loss of control or damage to the mitre saw.

r) After finishing the cut, release the switch, hold the saw head down and wait for the

blade to stop before removing the cut-off piece. Reaching with your hand near the

coasting blade is dangerous.

t) Use only saw blades recommended by the manufacturer, which conform to EN 847-1, if

intended for wood and analogous materials.

Customer Helpline 1300 889 028

WARNING! Read all safety warnings and all instructions. Failure to follow the

warnings and instructions may result in electric shock, ﬁre and/or serious injury.

Save all warnings and instructions for future reference.

- This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless they

have been given supervision or instruction concerning use of the appliance by a person

responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent

or similarly qualiﬁed persons in order to avoid a hazard.

Additional safety instructions for your Battery Charger

1. Before charging, read the instructions.

2. For charge Li-ion battery pack only.

3. Do not charge a leaking battery.

4. Do not use chargers for works other than those for which they are designed.

5. Before charging, ensure your charger is matching the local AC supply.

6. The charging device must be protected from moisture.

7. Do not use the charging device in the open.

8. Do not short out the contacts of battery or charger.

9. Respect the polarity “+/-“ when charging.

10.Do not open the unit and keep out of the reach of children.

11.Do not charge the batteries of other manufactures or ill-suited models.

12.Ensure that the connection between the battery charger and battery is correctly

positioned and is not obstructed by foreign bodies.

13.Keep battery charger’s slots are free of foreign objects and protect against dirt and

humidity. Store in a dry and frost-free place.

14.When charging batteries, ensure that the battery charger is in a well-ventilated

area and away from inflammable materials. Batteries can get hot during charging.

Do not overcharge any batteries. Ensure that batteries and chargers are not left

unsupervised during charging.

15.Do not recharge non-rechargeable batteries, as they can overheat and break.

16.Longer life and better performance can be obtained if the battery pack is charged

when the air temperature is between 18oC and 24oC. Do not charge the battery pack

in air temperatures below 4.5oC, or above 40.5oC. This is important as it can prevent

serious damage to the battery pack.

17.Charge only battery pack of the same model provided by manufacturer and of

models recommended by manufacturer.

a) Do not dismantle, open or shred cells or battery pack.

b) Do not short-circuit a battery pack. Do not store battery packs haphazardly in a

box or drawer where they may short-circuit each other or be short-circuited by

conductive materials. When battery pack is not in use, keep it away from other metal

objects, like paper clips, coins, keys, nails, screws or other small metal objects, that

can make a connection from one terminal to another. Shorting the battery terminals

together may cause burns or a ﬁre.

c) Do not expose battery pack to heat or fire. Avoid storage in direct sunlight.

Safety Information

Important - Please read these instructions fully before starting assembly

General Safety Warnings for your Battery Charger

Safety Warnings for battery pack

Customer Helpline 1300 889 028

Safety Information

Important - Please read these instructions fully before starting assembly

d) Do not subject battery pack to mechanical shock.

e) In the event of battery leaking, do not allow the liquid to come into contact with the

skin or eyes. If contact has been made, wash the affected area with copious amounts

of water and seek medical advice.

f) Seek medical advice immediately if a cell or battery pack has been swallowed.

g) Keep battery pack clean and dry.

h) Wipe the battery pack terminals with a clean dry cloth if they become dirty.

i) Battery pack needs to be charged before use. Always refer to this instruction and use

the correct charging procedure.

j) Do not maintain battery pack on charge when not in use.

k) After extended periods of storage, it may be necessary to charge and discharge the

battery pack several times to obtain maximum performance.

l) Battery pack gives its best performance when it is operated at normal room

temperature (20 °C ± 5 °C).

m) When disposing of battery packs, keep battery packs of different electrochemical

systems separate from each other.

n) Recharge only with the charger specified by POSITEC . Do not use any charger other

than that specifically provided for use with the equipment. A charger that is suitable for

one type of battery pack may create a risk of ﬁre when used with another battery pack.

o) Do not use any battery pack which is not designed for use with the equipment.

p) Keep battery pack out of the reach of children.

q) Retain the original product literature for future reference.

r) Remove the battery from the equipment when not in use.

s) Dispose of properly.

General Safety Warnings for your Laser

WARNING! Read all safety warnings and all instructions. Failure to follow the

warnings and instructions may result in serious injury.

Save all warnings and instructions for future reference.

These lasers do not normally present an optical hazard although staring at the beam may

cause ﬂash blindness.

Do not stare directly at the laser beam. A hazard may exist if you deliberately stare into the

beam, please observe all safety rules as follows:

1. The laser shall be used and maintained in accordance with the manufacturer’s instructions.

2. Never aim the beam at any person or an object other than the work piece.

3. The laser beam shall not be deliberately aimed at another person and shall be prevented

from being directed towards the eye of a person for longer than 0.25 seconds area.

4. Always ensure the laser beam is aimed at a sturdy work piece without reﬂective

surfaces, e.g. wood or rough-coated surfaces are acceptable. Bright shiny reﬂective

sheet steel or similar is not suitable for laser applications as the reﬂective surface may

direct the laser beam back at the operator.

5. Do not change the laser device with a different type. The manufacturer or an authorized

agent must carry out repairs.

6. CAUTION: Use of controls or adjustments other than those speciﬁed herein may result in

hazardous radiation exposure.

Additional safety warning for class 2 laser

The laser device ﬁtted to this tool is CLASS 2 with a maximum radiation of 1mW and 650nm

wavelength. CLASS 2 LASER RADIATION, DO NOT STARE INTO BEAM

Safety Warnings for battery pack

Customer Helpline 1300 889 028

In The Box

Parts

Operating handle

Release latch

Upper ﬁxed blade safety guard

Blade bolt cover screw

Lower rotating blade safety guard

Laser light

Fence

Table insert

Mitre table lock knob

Mitre latch

Mitre scale

Mitre table

6mm Hex key

Bevel scale adjustment screw

Bevel scale

Slide bars

Guard retraction arm

Blade bolt cover

Switch trigger

Switch locker

Laser light switch

Battery pack

Battery pack release button

Slide lock

Bevel lock knob

0° Bevel adjustment screw

Fence securing screw

Work clamp

Release knob

Motor housing

Spindle lock button

Trenching depth adjustment screw

Trenching stop

Trenching depth lock nut

Mounting hole

Dust bag

Indice

Altri manuali ToolPRO Sega

ToolPRO

ToolPRO HM80L Manuale utente

Manuali Sega popolari di altre marche

RIDGID

RIDGID BS1400 Manuale utente

ATIKA

ATIKA BWS 400-2 Manuale utente

RGC

RGC FS20 Manuale utente

Makita

Makita M2300 Manuale utente

IMET Spa

IMET Spa BASIC 300 PLUS SHI Manuale utente

IMET Spa

IMET Spa SIRIO 370 AF-E Manuale utente

Optimum

Optimum OPTisaw CS 275 Manuale utente

Makita

Makita BPB180 Manuale utente

Stihl

Stihl MS 462 C-M Manuale utente

AEG

AEG TS 250 K Manuale utente

Meec tools

Meec tools 004665 Manuale utente

Makita

Makita LS1018L Manuale utente

Ryobi

Ryobi RCS1400 Manuale utente

DeWalt

DeWalt DCS391 Manuale utente

Sealey

Sealey SA72 Manuale utente

skilsaw

skilsaw SPT88 Istruzioni per il montaggio

Urrea

Urrea SI810 Dimensioni e guida di installazione

EINHELL

EINHELL BKG 210/1 Manuale utente