Top Chef HGM408 Manuale utente
Welcome
Important Safeguards
Product Overview
How to Use
Multifunctional Food Processor
Model: HGM408
Getting Started Guide
220-240V~ 50/60Hz 820-1100W
English
Deutsch
Español
Français
Italiano
01~14
15~29
30~44
45~59
60~74
Contents
Welcome to the world of TopChef cooking.
Important Safeguards
Read this user manual carefully before you use the appliance and keep it for future reference.
Danger
- Never immerse the motor unit in water or any other liquid, nor rinse it under the tap.
Warning
- Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance.
- Never connect this appliance to a timer switch in order to avoid a hazardous situation.
- Do not use the appliance if the mains cord, the plug or other parts are damaged.
- If the mains cord is damaged, it must be replaced by the supplier, a service center authorized by Supplier in order to avoid a
hazard.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance
by a responsible person for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Never let the appliance run unattended.
- Never use your ngers or an object (e.g. a spatula) to push ingredients down the feeding tube while the appliance is running.
Only use the pusher for this purpose.
- Be very careful when you handle the discs, blenderblade unit or food processor blade unit. Be especially careful when you
remove them from the food proces-sor bowl or blender jar, when you empty the bowl or jar and when you clean them. Their
cutting edges are very sharp.
Caution
- Never switch o the appliance by turning the blender jar, the food processor bowl or the juicer bowl. Always switch o the
appliance by turning the speed control knob to OFF.
- Switch o the appliance before you detach any accessories.
- Unplug the appliance immediately after each use.
1
Product Overview
1. Main Body
5. Drive Shaft
9. Citrus Juicer Filter
13. Chopping Blade
17. Grinder Lid
21. Blender Jar Base
2. Power Switch
6. Bowl Lid
10.
Thick/Coarse Shredding Disc
14. Dough Hook
18. Measuring Cup
22. Whisk Body
3. Safety Switch
7. Double Pusher
11. Adjustable Slicing Disc
15. Spatula
19. Blender Jar Lid
23. Whisk stick
4. Bowl
8. Citrus Juicer
12. French Fryer Disc
16. Grinder
20. Blender Jar
- Always unplug the appliance before you reach into the blender jar with your ngers or an object (e.g. aspatula).
- Wait until moving parts stop running before you remove the lid of the bowl or jar.
- Never use any accessories or parts from other manufacturers or that Supplier does not specically recommend. If you use
such accessories or parts, your guarantee becomes invalid.
- Do not exceed the maximum content indicated onthe food processor bowl or the blender jar.-Do not use the juicer if the
sieve is damaged.
- Consult the tables in this user manual for the correct quantities and processing times.
- Thoroughly clean the parts that come into contact with food before you use the appliance for the rst time.
- Let hot ingredients cool down before you processthem (max. temperature 80°C/175°F)
2
HOW TO USE
1
- Please wash thoroughly those components which may contact the food before using the product.
- This product has a dual safety system. It will work only after all parts are properly installed.
Place the Bowl on the Main Body, the angle between the handle and the
main body safety switch is about 55 degrees (before placing, make sure
that the Main Body is on a at desktop and it is not shaking)
3
Chopping Meat
2
3
4
5
6
7
Hold the handle of the Bowl and turn it clockwise into the Main Body.
When the "▼" on the Bowl is opposite to the Main Body “ ” or a "click" is
heard, it indicates that the Bowl has been rotated in the right position.The
product does not work if the Bowl is not in the right position.
Put the meat into the Bowl. Food that needs to be processed should not
exceed 500g
Insert the power cord into the power supply, and rotate the switch to 1 or 2
shift and start working. Each working time should be less than 30 seconds.
①Cover the Blow with the Bowl Lid.
②Rotate the Bowl Lid clockwise into the Bowl.
When the "click" is heard, it means that the Bowl Lid has been rotated in the right
position, The product does not work if the Bowl Lid is not in the right position.
Put the Drive Shaft into the Bowl.
Put the Chopping Blade on the Drive Shaft.
4
Kneading Dough
1）Make sure that the Chopping Blade is placed rst when putting the ingredients in the Bowl, so as to avoid the diculty
to assemble Chopping Blade.
2）The Bowl Lid should be in the right postion to avoid not working.
3）Do not process hard food materials, such as coee beans, ice cubes, etc. to avoid cracking Bowl and deformation blunt of
Chopping Blade;
4）Ingredient should not exceed the maximum calibration line of the Bowl, otherwise the crushing eect and life of the
product will be aected.
5）When there is ingredient sticking to the Chopping Blade and Bowl, please be sure to turn o the power, then take out
the food.
1
2
3
Place the Bowl on the Main Body, the angle between the handle and the
main body safety switch is about 55 degrees (before placing, make
sure that the Main Body is on a at desktop and it is not shaking)
Hold the handle of the Bowl and turn it clockwise into the Main Body.
When the "▼" on the Bowl is opposite to the Main Body “ ” or a "click" is
heard, it indicates that the Bowl has been rotated in the right position.The
product does not work if the Bowl is not in the right position
Put the Drive Shaft into the Bowl.
CAUTION
5
4
5
6
7
Put the Drive Shaft into the Bow
Put the our into the Bowl. The our should not exceed 500g
①Insert the power cord into the power supply, and rotate the switch to 1
shift and start working. Each working time should be less than 3 minutes.
②Pour slowly water into the Bowl through chute on the Bowl Lid when
the product start working. Don't pour the water too fast.
①Cover the Blow with the Bowl Lid.
②Rotate the Bowl Lid clockwise into the Bowl.
When the "click" is heard, it means that the Bowl Lid has been rotated in the right
position, The product does not work if the Bowl Lid is not in the right position
1）Make sure that the Dough Hook is placed rst when pouring the our inot the Bowl, so as to avoid the diculty to assemble the Dough
Hook.
2）Do not process hard food materials, such as coee beans, ice cubes, etc. to avoid cracking Bowl and deformation blunt of Dough Hook.
3）Ingredient should not exceed the maximum calibration line of the Bowl, otherwise the crushing eect and life of the product will be
aected.
4）When there is ingredient sticking to the Dough Hook and Bowl, please be sure to turn o the power, then take out the food.
CAUTION
6
Slicing & Shredding
1
2
3
4
Place the Bowl on the Main Body, the angle between the handle and the
main body safety switch is about 55 degrees (before placing, make
sure that the Main Body is on a at desktop and it is not shaking)
Hold the handle of the Bowl and turn it clockwise into the Main Body. When the
"▼" on the Bowl is opposite to the Main Body “ ” or a "click" is heard, it indicates
that the Bowl has been rotated in the
right position.The product does not work if the Bowl is not in the right position
Place the Adjustable Slicing Disc on the Drive Shaft. (Three types of Disc can be
selected according to the processing requirements)
Put the Drive Shaft into the Bowl
5）Please put in the appropriate proportion of our rst, then start the machine to ensure that the Dough Hook works rst, then evenly
and slowly pour into the appropriate proportion of water, do not pour water
too fast, so that water can not form paste with the our
7
Indice
Lingue:
