Topcon System 350 Manuale utente
www.topconpa.com
Spreader Controller
System 350
X30 Console
Operator’s Manual
X30 Spreader Controller
Operator’s Manual
Part Number: AGA4950-EN
Rev Number: 1.0.1
For use with Software Version 3.12.12
© Copyright Topcon Precision Agriculture
August 2012
All contents in this manual are copyrighted by Topcon. All rights reserved. The information
contained herein may not be used, accessed, copied, stored, displayed, sold, modified, published
or distributed, or otherwise reproduced without express written consent from Topcon.
www.topconpa.com
X30 Spreader Controller
0-1
Preface
This manual provides information about operating and
maintaining this Topcon Precision Agriculture product. Correct
use and servicing is important for safe and reliable operation of
the product.
It is very important that you take the time to read this manual
before using the product.
Information in this manual is current at the time of publication. A
system may vary slightly. The manufacturer reserves the right to
redesign and change the system as necessary without notification.
Alert Symbols
In this manual two alert symbols are used.
This offers additional information.
Warning: A warning signal appears on safety
signs and in this manual to show that this
information is very important to your safety.
LEARN these and APPLY them.
X30 Spreader Controller
0-2
Terms and Conditions
Please read these Terms and Conditions carefully.
General
APPLICATION
- You accept these
Terms and Conditions by purchasing
the product from Topcon Precision
Agriculture (TPA) or from one
TPA’s product dealers.
COPYRIGHT
- All information
contained in this manual is the
intellectual property of, and
copyrighted material of TPA. All
rights are reserved. You may not use,
access, copy, store, display, create
derivative works of, sell, modify,
publish, distribute, or allow any third
parties access to, any graphics,
content, information or data in this
manual without TPA’s express
written consent and may only use
such information for the care and
operation of your product. The
information and data in this manual
are a valuable asset of TPA and are
developed by the expenditure of
considerable work, time and money,
and are the result of original
selection, coordination and
arrangement by TPA.
TRADEMARKS
– ZYNX,
PROSTEER, EAGLE, KEE
Technologies, Topcon, Topcon
Positioning Systems and Topcon
Precision Agriculture are trademarks
or registered trademarks of the
Topcon Group of companies.
Microsoft and Windows are
trademarks or registered trademarks
in the United States and/or other
countries of Microsoft Corporation.
Product and company names
mentioned herein may be trademarks
of their respective owners.
WEBSITE AND OTHER
STATEMENTS
- No statement
contained at the website of TPA or
any other Topcon Group company or
in any other advertisements or TPA
literature or made by an employee or
independent contractor of TPA
modifies these Terms and
Conditions.
IMPORTANT: SAFETY
- Improper
use of the product can lead to death
or injury to persons, damage to
property and/or malfunction of the
product. The product should only be
repaired by authorized TPA service
centers. You should closely review
the safety warnings and directions as
to the proper use of the product in
this manual and at all times comply
with the same.
Limited Warranty
ELECTRONIC AND
MECHANICAL COMPONENTS
-
TPA warrants that the electronic
components manufactured by TPA
shall be free of defects in materials
and workmanship for a period of one
year from the original date of
shipment to the dealer. TPA
X30 Spreader Controller
0-3
warrants that all valves, hoses, cables
and mechanical parts manufactured
by TPA shall be free of defects in
materials and workmanship for a
period of one year from the date of
purchase.
RETURN AND REPAIR - During
the respective warranty periods, any
of the above items found defective
may be shipped to TPA for repair.
TPA will promptly repair or replace
the defective item at no charge, and
ship it back to you. You must pay the
shipping and handling charges in
respect of the same. Calibration of
components, labor and travel
expenses incurred for in-field
removal and replacement of
components are not covered in this
warranty policy. The foregoing
warranty shall NOT apply to damage
or defects resulting from:
(i) disaster, accident or abuse
(ii) normal wear and tear
(iii) improper use and/or
maintenance
(iv) unauthorized modifications of
the product; and/or
(v) use of the product in
combination with other products
not supplied or specified by
TPA.
Software accompanying any product
is licensed for use in connection with
the product and not sold. Use of
software that is provided with a
separate end user license agreement
(“EULA”) will be subject to the
terms and conditions, including those
relating to limited warranty, of the
applicable EULA, notwithstanding
anything in these Terms and
Conditions to the contrary.
WARRANTY DISCLAIMER -
OTHER THAN FOR THE ABOVE
WARRANTIES, WARRANTIES
PROVIDED IN AN APPLICABLE
WARRANTY CARD, APPENDIX
OR END USER LICENSE
AGREEMENT, THIS MANUAL,
THE PRODUCT AND RELATED
SOFTWARE ARE PROVIDE ‘AS-
IS’. THERE ARE NO OTHER
WARRANTIES AND TO THE
EXTENT ALLOWED BY LAW TPA
EXCLUDES ALL IMPLIED
TERMS, CONDITIONS AND
WARRANTIES IN RESPECT OF
THE MANUAL AND THE
PRODUCT (INCLUDING ANY
IMPLIED WARRANTY OR
MERCHANTABILITY OR
FITNESS FOR ANY PARTICULAR
USE OR PURPOSE). TPA IS NOT
RESPONSIBLE FOR THE
OPERATION OF GNSS
SATELLITES AND/OR
AVAILABILITY, CONTINUITY,
ACCURACY, OR INTEGRITY OF
GNSS SATELLITE SIGNALS.
LIABILITY LIMIT AND
INDEMNITY - TPA and its dealers,
agents and representatives shall not
be liable for technical or editorial
errors or omissions contained herein
or for special, indirect, economic,
incidental or consequential damages
resulting from the furnishing,
performance or use of this material,
the product or its accompanying
software (including where TPA has
been advised of the possibility of
such damage). Such disclaimed
damages include but are not limited
to loss of time, loss or destruction of
data, loss of profit, savings or
revenue or loss of or damage to the
product. You shall defend,
indemnify and hold TPA harmless
from and against any claims, actions,
suits, damages, losses, liabilities and
X30 Spreader Controller
0-4
costs (including attorneys’ fees)
arising from, or relating to (a) your
operation use, or maintenance of the
product and/or software other than as
provided for in this manual or the
applicable end user license
agreement; and (b) your negligence
or wrongful act or omission in
respect of the product.
In any event, TPA’s liability to you
or any other person for any claim,
loss or damage (in contract, tort or
on any other basis) will be limited
(in TPA’s option) to either (a) the
replacement or repair of the product,
or (b) payment of the cost of
replacing or repairing the product.
Other
These Terms and Conditions may be
amended, modified, superseded or
cancelled, at any time by TPA.
These Terms and Conditions will be
governed by, and construed in
accordance with:
-the laws of South Australia if the
product is sold and supplied to
you in Australia (in which case
the courts of South Australia or
the Federal Court of Australia
(Adelaide Registry) have
exclusive jurisdiction in respect
of any claim or dispute) or
-the laws of the State of California
if the product is sold and supplied
to you outside of Australia
-the provisions of the United
Nations Convention on Contracts
for the International Sale of
Goods shall not apply to these
Terms and Conditions.
All information, illustrations, and
applications contained herein are
based on the latest available
information at the time of
publication. TPA reserves the right
to make product changes at any time
without notice.
If any part of these Terms and
Conditions would be unenforceable,
the provision must be read down to
the extent necessary to avoid that
result, and if the provision cannot be
read down to that extent, it must be
severed without affecting the validity
and enforceability of the remainder
of these Terms and Conditions.
Service Information
Service assistance can be provided
by contacting your local TPA
Authorized Dealer.
X30 Spreader Controller
0-5
Communications Regulation Information
FCC Compliance Statement (USA)
This equipment has been tested and found to comply with
the limits for a Class ‘A’ digital device, pursuant to Part
15 of the FCC Rules. Operation of this equipment in a
residential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at the user's expense.
FCC Compliance Statement (Canada)
This Class A digital apparatus meets all requirements of
the Canadian Interference-Causing Equipment
Regulation.
CE EMC Statement (European Community)
Warning: This is a class ‘A’ product. In a domestic
environment this product may cause radio interference in
which case the user may be required to take adequate
measures.
‘C’ Tick EMC Statement (Australia & New Zealand)
This product meets the applicable requirements of the
Australia and New Zealand EMC Framework.
Type Approval and Safety Regulations
Type approval may be required in some countries to license the
use of transmitters on certain band frequencies. Check with local
authorities and your dealer. Unauthorized modification of the
equipment may void that approval, the warranty and the license to
use the equipment.
The receiver contains internal radio-modem. This can potentially
send signals. Regulations vary between countries, so check with
the dealer and local regulators for information on licensed and
unlicensed frequencies. Some may involve subscriptions.
X30 Spreader Controller
0-6
Radio and Television Interference
This computer equipment generates, uses, and can radiate radio-
frequency energy. If it is not installed and used correctly in strict
accordance with Topcon Precision Agriculture instructions, it
may cause interference with radio communication.
You can check if interference is being caused by this equipment
by turning the Topcon equipment off to see if the interference
stops. If the equipment is causing interference to a radio or other
electronic device, try:
Turning the radio antenna until the interference stops
Moving the equipment to either side of the radio or other
electronic device
Moving the equipment farther away from the radio or other
electronic device
Connecting the equipment to another circuit that is not linked
to the radio.
To reduce potential interference, operate the equipment at the
lowest gain level that will allow successful communication.
If necessary contact your nearest Topcon Precision Agriculture
dealer for assistance.
Changes or modifications to this product not authorized by
Topcon Precision Agriculture could void the EMC
compliance and negate authority to operate the product.
This product was tested for EMC compliance using Topcon
Precision Agriculture peripheral devices, shielded cables
and connectors. It is important to use Topcon Precision
Agriculture devices between system components to reduce
the possibility of interference with other devices.
X30 Spreader Controller
0-7
General Safety
DANGER: It is essential that the following
information and the product specific safety
information is read and understood.
Most incidents arising during operation, maintenance and repair
are caused by a failure to observe basic safety rules or
precautions. Always be alert to potential hazards and hazardous
situations.
Always follow the instructions that accompany a Warning or
Caution. The information these provide aims to minimize risk of
injury and/or damage to property.
In particular follow instructions presented as Safety Messages.
Safety Messages and Warnings
The safety symbol is used with the relevant word: DANGER,
WARNING or CAUTION.
Messages marked in this way recommend safety precautions and
practices. LEARN and apply them.
DANGER: Indicates an imminently hazardous
situation that, if not avoided, could result in DEATH
OR VERY SERIOUS INJURY.
WARNING: Indicates a potentially hazardous
situation that, if not avoided, could result in DEATH
OR SERIOUS INJURY.
CAUTION: Indicates a potentially hazardous
situation that, if not avoided, may result in MINOR
INJURY.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Topcon Controllori
Topcon
Topcon ISOBUS Artemis Manuale utente
Topcon
Topcon Tesla Manuale utente
Topcon
Topcon OPUS A3 Eco Scheda tecnica
Topcon
Topcon KB-50 Manuale utente
Topcon
Topcon T18 Manuale utente
Topcon
Topcon FC-2500 Manuale utente
Topcon
Topcon Athene SM-1 Manuale utente
Topcon
Topcon ASC-10 Manuale di installazione
Topcon
Topcon ISOCAN Manuale utente
Topcon
Topcon Wachendorff OPUS A8 ECO Manuale utente
