Page 5
Notkestraße 97 · 22607 Hamburg
HAMLET SOLUTION (S4)
Outside Air Kit
Modellbezeichnung
Größe
SUNDSTRÖM
Best. nr.
TOPLICHT
Art-Nr.
SR 900 S
Step 3 : Ensure that the heat shield is fully located onto the slot cut out within the heat
shield (Both Sides -Left & Right).
Step 4 :
Insert and tighten the 2x mounting screws, via the circular cut out in the face of the
heat shield. Use a screwdriver to tighten the screws. Thus clamping the outside air kit to the rear
of the appliance.
Step 5 : With the outside air (See Fig. 6), please observe the revised distance to
combustible materials, as stated in the instruction guide (BK 738).
Figure 5. Outside air Location
Arada Ltd, The Fireworks, Weycroft Avenue, Axminster, United Kingdom EX13 5HU
Flue pressure test point
location. This can be accessed
whilst the heat shield is in situ.
Figure 6. Outside Air Layout
Rear flue location. If installation
requires a rear flue, the outside
air cover can be knocked out.
Outside Air Fing Instrucons
Tel.: +49 (0)40 - 88 90 100
www.toplicht.de
Schisausrüster
