Topten TK108 Manuale utente
GPS Vehicle Tracker
USER MANUAL
(Model: TK108)
GUANGZHOU TOPTEN ELECTRONICS FACTORY
Address: 5/F, Bldg.B, No.3, Tangdong Guangtang West Rd., Guangtang Industrial
Zone,Tianhe District, Guangzhou, China.
Tel: (+86)20-38351400, 38351401
Version 3.0
(Date: March. 20, 2020)
TK108 GPS Vehicle Tracker
User Manual
CONTENT
Preface ..............................................................................................................................2
I. Features & Functions.....................................................................................................3
II. How to Operate it.........................................................................................................4
Authorize the Alarm-received Phone No...................................................................4
Arm/Disarm by Phone Calling ..................................................................................4
Check the Vehicle’s Status.........................................................................................5
Arm/Disarm the System by SMS ..............................................................................5
Check the location by Google Map’s URL................................................................5
Check the Real Physical Address ..............................................................................6
Change User Password ..............................................................................................6
Stop the Car by SMS .................................................................................................6
Restore the Stopped Car to Normal Status ................................................................7
Monitor the Voice around the Car..............................................................................7
Check the Odometer of the car ............. ....................................................................7
Over-speed Alert........................................................................................................7
Upgrade the fimeware by air......................................................................................8
Power Save Mode......................................................................................................8
Set to take photos automatically by time intervals.................................................... 9
Other SMS Command List ........................................................................................9
IV. The Setting for GPRS Connection............................................................................10
III. Alarm Types..............................................................................................................12
IV. Installation.................................................................................................................13
V. RFID Car Alarm Functions and How to usd..............................................................14
VI . Specifications..................................................... ......................................................16
VII. FAQs & Troubleshooting .........................................................................................17
VIII. Maintenance ............................................................................................................18
Page 1
TK108 GPS Vehicle Tracker
User Manual
Preface
TK108 GPS Vehicle tracker is the cost-effective solution for security &
real-time tracking. It is specially used for car/truck tracking because of its
compact size and strong functions.
Read it firstly:
Please read this manual thoroughly before you use the device; please keep
it for future reference.
Attention:
(1) Please keep the device away from heavy water, high temperature, heavy
dust or strong magnetism.
(2) Please prepare a valid GSM SIM card in advance.
(3) For safety reason, do not tell other people the mobile phone number of
your TK108.
Warning:
We strongly suggest user let the professional car electrician to install the
system.
Page 2
TK108 GPS Vehicle Tracker
User Manual
I. Features & Functions
1. Track on command or by time interval or by distance;
2. Arm/disarm by SMS or phone call;
3. Check the car’s real physical address;
4. Track by mobile SMS to get the latitude, longitude, speed, direction &
odometer etc;
16. I/O: 2 inputs and 2 output;
17. Compact size with water-proof design;
Page 3
18. Wide working voltage range, from 10V-90VDC, suitable for car or big truck;
19. There are 3 types of working mode for power saving flexibly;
20. 1Mb offline data logger, it can store 5520 waypoints;
21. Support active RFID Driver ID identification (optional);
22. Support camera(optional).
5. Check the location directly by the Google map’s URL;
6. Online website tracking by GPRS data network;
7. Odometer function, Voice monitoring;
8. Over-speed alert, Geo-fence alert, Movement alert;
9. Acceleration & Deceleration (Crash) Alarm;
10. OTA function: Upgrade firmware on air;
11. Cut off engine to stop the car safely by SMS/GPRS;
12. Built-in shock sensor for power saving & triggering alarm;
13. Built-in rechargeable backup battery; when the car battery is cut off or low
enough, the system will send out power failure alert immediately;
14. Support SOS button(optional);
15. Support analog input for fuel monitoring/alcohol sensor;
TK108 GPS Vehicle Tracker
User Manual
II. How to Operate it
The default user password is 111111.
If the user password is changed, user should send the SMS command with
the new user password instead of 111111.
XXX is the control code, all the letters must be capital letters or in small
letters, command with mixed capital letter & small letter is not recognized by
system
Authorize the Alarm-received Phone No.
SMS command: 111111*10 Mobile #1*20 Mobile #2*30Mobile #3*
In case of alarm, if user wants to get the alarm SMS from the tracker, he/she
needs send the following SMS to program the tracker firstly, otherwise, the alert
information can't be received correctly.
Example: User sends the SMS 111111*1013922713571*2013711189059* to the
Tracker’s SIM card number, if there is any alarm, system will send SMS to both of these two
mobiles. In case of SOS alarm, the system will only send alarm to the mobile #2
Arm/Disarm by Phone Calling
User could also use the 1st alarm-received mobile phone to call the
Tracker’s SIM card number, so as to arm/disarm the system.
Arm: After hearing several ring tones, if the systems hang up the call
automatically, and call back you, it means that the system is armed.
Disarm: After hearing several ring tones, if the system hangs up the call
automatically, and don’t call back you, it means that the system is disarmed.
Note:
(1) There is no communication fee for this operation, it is a very convenient way to arm
& disarm the system.
(2)The SIM card inside the device must have the function of Caller ID Display.
(3) Only the 1st alarm-received mobile phone can realize this function.
Page 4
TK108 GPS Vehicle Tracker
User Manual
Check the Vehicle’s Status
SMS command: 111111CHK (or 111111chk)
This instruction is used to inquiry the vehicle’s location & system’s status.
Arm/Disarm the System by SMS
SMS command: 111111ARM (or 111111arm)
This SMS instruction is used to arm the system
When the system is armed, the movement alert is activated automatically.
When the car moves, the alarm will be triggered.
SMS command: 111111DSM (or 111111dsm)
This command is used to disarm the system & stop sending alert SMS.
Check the location by Google Map’s URL
SMS command: 111111MAP (or 111111map)
Upon receiving the SMS command, the tracker will automatically send back
the SMS including the Google map’s URL, user can use smart phone (GPRS
data service is enabled) to open the URL link, the car’s location will be showed
on the Google map.
Page 5
as ‘Tracker Armed……’
The system will send back the SMS, includes the similar information, such
TK108 GPS Vehicle Tracker
User Manual
Check the Real Physical Address
SMS command: 111111ADD (or 111111add)
When user sends this SMS command to the tracker, the tracker will automatically send
back the car’s real physical address (such as city name, street name) to your mobile by
SMS. There is no need for the user to setup any server, but it needs supports from our
platform.
Remark: (1) The GPRS data service of the tracker’s SIM card must be activated, and
the correct GPRS setting is needed (refer to the chapter of the setting of GPRS
connection), user can set up the GPRS upload time interval to 0 so as to save the GPRS
flow; (2) The physical address depends on the Google map’s address information. If the
place has very detailed information on Google map, then the physical address by SMS is
very detailed.
Change User Password
SMS command: 111111PSWnnnnnn (or 111111pswnnnnnn)
This instruction is used to change the user password. The length of the
User’s password is 3~6 digits. Users are suggested to change to the new
password in use.
Example: User sends the SMS “111111PSW12345” to the system SIM card
number, and gets the confirmed SMS “111111PSW12345” in 3 seconds. It
means that the user password has been changed to 12345.
Remark: Please keep the password deep in mind if it is changed.
Stop the Car by SMS
SMS command: 111111STP (or 111111stp)
This instruction is used to stop the car immediately
Page 6
Attention: It is very dangerous to stop the car when the vehicle is running at high
speed. We do not take any responsibility to the consequence caused by this
action.
TK108 GPS Vehicle Tracker
User Manual
Restore the Stopped Car to Normal Status
SMS command: 111111RES (or 111111res)
It is used to restore the car to normal status after being stopped.
Monitor the Voice around the Car
SMS command: 111111MON
This instruction is used to monitor the voice around the car. The SIM card
inside the system pays for the communication fee.
SMS command: 111111MON!
This instruction is used to monitor the voice around the car. The user’s
telephone pays for the communication fee.
SMS command: 111111MON:P1*
This instruction is used to program the phone number which is used for
carrying out direct monitoring or talking always.
User uses this phone number to call the tracker, it will be connected
automatically. By this way, user can monitor the voice freely.
Example: 111111MON:13922713571*
Note: If the phone is the same as the first alarm-received phone (111111*10
Mobile #1*20 Mobile #2*), the calling from this telephone can only be
arm/disarm the tracker.
Over-speed Alert
111111SPD:X
x is the speed in KM/H , maximum value is 255M/H
Page 7
Example: User uses the mobile 13780012345 to send 111111MON! to the
system, then use the mobile 13780012345 to call the tracker, it will be
connected automatically, and user can monitor the voice around.
Odometer
SMS command: 111111ODO:
It is used to read the present odometer
SMS command:111111ODO:X
it is used to set the basic value of odometer
TK108 GPS Vehicle Tracker
User Manual
(For example: 111111SPD:120, if the car speed is over 120KM/H, it will
send alert SMS to warn you).
111111SPD:0
111111SPD:
to disable the over-speed alert. It is the default setting.
to check the setting of over-speed alert.
Remark: this function is just for reference, because there might be some
time delay or error in detecting the running car’s real speed by GPS. Default
speed limitation is 150KM/H.
Page 8
Upgrade
111111UPG
This instruction is used to upgrade the equipment firmware.
Reply：Upgrade successfully!
Upgrade fail! Network error
Upgrade fail! No upgrade files
Upgrade fail! Upgrade files error
This is the latest version
Power Save Mode
SMS command: 111111PWR:X
Value of X
0
1 (default)
2
Actions
Disable power save mode
GPS on when ACC is on
Close GPRS connection, GPS module
Power consumption
32mA
11.5mA
11mA
After setting 111111PWR:2, if there is no vibration & SOS alarm and ACC is
OFF, the tracker will go into power save mode after 5 minutes.
Once there is vibration or SOS alarm, or ACC is ON, the tracker will wake
up from the power save mode immediately.
TK108 GPS Vehicle Tracker
User Manual
Other SMS Command List
Note: ****** is user’s password and the default password is 111111. The
tracker will only accept commands with the correct password.
Page 9
Set to take photos automatically by time intervals
SMS command: 111111CAM:X
Xcan set 0 - 65535 the unit is minute.
(if you want to cancel the function about taking photo automatically, then just
set the X with 0)
The photo only can send to the platform, can’t send to phone.
Functions
SMS Command
Example
Movement Alarm
******MOV:X
111111MOV:500
X: X is the radius of the fence. default setting is 500 meters
=0: close the movement alarm (when tracker is armed, it will be activated automatically.)
Example: it is set the radius of movement alarm as 500meters.
Set the Shock Sensor
******SHK:X
111111SHK:3
It is to set the sensitivity of the shock sensor. X=1~5. (X=1,less sensitive; X=5, most
sensitive; default X=2).
Clear the Parameters
******CLR
111111CLR
Remarks: it will reset all the parameters to the default settings.
Reboot the Tracker
******STR
111111STR
It will reboot the tracker immediately.
Altri manuali per TK108
1
Indice
Altri manuali Topten GPS
Topten
Topten PT99-KH Manuale utente
Topten
Topten TK218 Manuale utente
Topten
Topten GT08 Manuale utente
Topten
Topten GT08 Manuale utente
Topten
Topten PT99 Manuale utente
Topten
Topten MT05S Manuale utente
Topten
Topten TK310 Manuale utente
Topten
Topten TK108 Manuale utente
Topten
Topten MT113 Manuale utente
Topten
Topten MT09 Manuale utente
