TORCHVIEW CDVR-0402U Manuale utente

- 1 -

User Manual

Digital Video Recorder

CDVR-0402U

- 2 -

NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

FCC Compliance Statement

WARNING

- 3 -

1. Read Instructions

All the safety and operating instructions should be read before the product is operated.

2. Retain Instruction Manuals

The safety and operating instructions should be retained for future reference.

3. Heed Warnings

All warnings on the product and in the operating instructions should be adhered to.

4. Follow Instructions

All operating and use instructions should be followed.

5. Cleaning

Unplug this product from the power outlet before cleaning.

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6. Attachments

Do not use attachments not recommended by the product manufacturer as they may cause hazards.

7. Water and Moisture

Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet

basement; or near a swimming pool; and the like.

8. Accessories

Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious

injury to a child or adult, and serious damage to the product.

9. Ventilation

Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and

to protect it from overheating, and these openings must not be blocked or covered. The openings should never be

blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a

built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s

instructions have been adhered to.

10. Power Sources

This product should be operated only from the type of power source indicated on the marking label. If you are not

sure of the type of power supply to your home, consult your product dealer or local power company.

11. Power-Cord Protection

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed

upon or against them, paying particular attention to cards at plugs, convenience receptacles, and the point where

they exit from

12. Overloading

Do not overload wall outlets, extension cords, or integral convenience receptacle as this can result in a risk of

fire or electric shock.

13. Object and Liquid Entry

Never push objects of any kind into this product through openings as they may touch dangerous voltage

points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

MPORTANT SAFETY INSTRUCTION

- 4 -

14. Damage Requiring Service

Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following

conditions:

a) When the power-supply cord or plug is damaged.

b) If liquid has been spilled, or objects have fallen into the product.

c) If the product has been exposed to rain or water.

d) If the product does not operate normally by following the operating instructions. Adjust only those controls

that are covered by the operating instructions as an improper adjustment of other controls may result in

damage and will often require extensive work by a qualified technician to restore the product to its normal

operation.

e) If the product has been dropped or damaged in any way and

f) When the product exhibits a distinct change in performance - this indicates a need for service.

15. Replacement Parts

When replacement parts are required, be sure the service technician has used replacement parts specified by

the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in

fire, electric shock, or other hazards.

16. Safety Check

Upon completion of any service or repairs to this product ask the service technician to perform safety checks

to determine that the product is in proper operating condition.

17. Heat

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat the product.

18. Internal Fan

The internal fan rotates at high speed and may cause an accident.

19. Battery

Change the lithium battery after turning off the power of the product.

Check the polarity of the lithium battery while changing and change the lithium battery with the same type

which is in the product or with a similar type recommended by your vendor.

Dispose the lithium battery according to the instructions of the battery manufacturer.

There is danger of explosion when instructions are not followed.

20. Turning On/Off the DVR power.

Do not turn off the power by removal of the power plug.

To turn off the power, click the power button from the front panel.

When the system stops abnormally, the power button might not work.

Click power button for 5 full seconds to turn power off.

Do not turn off the power unproperly or apply shock/vibration to unit while the hard disk is activating.

It may cause hard disk failure or loss of data.

Important Safety Instruction

- 5 -

FCC COMPLIANCE STATEMENT...........................................................................................

IMPORTANT SAFETY INSTRUCTIONS................................................................................

INDEX................................................................................................................................

1. INTRODUCTION AND INSTALLATION

DVR Components..........................................................................................................

Front Panel....................................................................................................................

Rear Panel.....................................................................................................................

Remote Controller.....................................................................................................

2. INSTALLATION

Installation of Hard Disk Drives...........................................................................................

Starting the DVR............................................................................................................

Log In & Log Out...........................................................................................................

USBFlashDrive............................................................................................................

3. CONFIGURATION

SystemSetup....................................................................................................................

CameraSetup....................................................................................................................

MotionDetection..................................................................................................

Masking...............................................................................................................

Record Setup.................................................................................................................

Record Schedule...........................................................................................................

SensorSetup......................................................................................................................

Network Setup...................................................................................................................

DisplaySetup.....................................................................................................................

Backup&Format............................................................................................................

4. OPERATION

Monitoring.....................................................................................................................

Monitoring Screen................................................................................................

Freeze..................................................................................................................

Zoom...................................................................................................................

Sequence Display..................................................................................................

PTZ Control......................................................................................................................

Recording.................................................................................................................

Search(Playback)...........................................................................................................

DVRSearch...........................................................................................................

USBSearch..........................................................................................................

LOGSearch.......................................................................................................................

Video Clip Copy............................................................................................................

Appendix : Technical Specification........................................................................................

CONTENTS

- 6 -

The CDVR-0402 is a compact sized multiplexer digital video recorder developed to provides extremely long

recording capabilities with advanced recording and convenient search functions.

1.1. DVR Components

Check the package and contents for visible damage. If any components are damaged or missing, do not attempt

to use the unit, contact the supplier immediately. If the unit must be returned, it must be shipped in the original

packing box.

CDVR0402 Unit

Remote Controller

Power Cable

Program CD

Operation Manual

1. I

NTRODUCTION

- 7 -

1.2. Product Description

1.2.1. Front Panel

①POWER:Power On/Off

②PANIC:Recording On/Off of all channels at highest speed and quality.

③Channel Indicator : Indicates which channels are operating

④PREV:Move to previous category

⑤NEXT:Move to next category

⑥Remote Control Extension Cable Port

⑦ESC:Return to previous mode

Turn On/Off the OSD

⑧CH:Change channels

⑨USBFlashDrivePort

⑩DirectionKeys&ENTER

(PTZ) : Move up, increase values, PTZ control(Tilt)

(PTZ) : Move down, decrease values, PTZ control (Tilt)

(PTZ) : Move left, PTZ Control(Pan)

(PTZ) : Move right, PTZ control(Pan)

ENTER : Enter MENU, Select/Enable a highlighted category/item.

Introduction

① ②③

④

⑤

⑥

⑦

⑧

⑨⑩

- 8 -

1.2.2. Rear Panel

①Power Cable Connection. ( Does not support 110V~220V Free Volt)

②Power Switch.

- Select the correct voltage for your region.

③Video Input Connectors

- Input connectors for video signals.

④Audio Input Connectors

- Input connectors for audio signals.

⑤VGA (Monitor) Port.

- Connection to PC monitor.

⑥Video (Composite) Output Connector

- Output connector for video signals to analogue monitors.

⑦Audio Output Connector

- Output connector for audio signals.

⑧S-Video Connector

- Connection to S-Video jack.

⑨Sensor and Alarm Output Connector

⑩DIP Switch

Type OFF Position(Up) ON Position(Down)

NTSC /PAL NTSC PAL

COMPOSITE / SVIDEO COMPOSITE S-VIDEO

None -

TEST -

⑪LAN Port

- Connection port for internet cable.

⑫PTZ Serial Port

- Connection to PTZ camera.

PTZ Serial Com Port Serial Remote Control ETC

Pin No. Explanation Pin No. Explanation Pin No.

Explanation Pin No. Explanation

1 nRS485 2 RX 6 RX 5 GND

9 RS485 3 TX 8 TX 4, 7 Not use

② ⑥ ⑦⑧⑨ ⑩ ⑪⑫

Introduction

① ③ ④⑤

- 9 -

1.2.3. Remote Controller

OSD OSD On/Off during Monitoring/Full-screen Playback.

PANIC Panic Recording On/Off.

Numeral Keys Select channel or type in characters.

CAPTURE Capture video clip/image to external memory.

F/F Remove image distortion during frame by frame advance.

PREVIOUS Move to previous category.

NEXT Move to next category.

Direction Keys Move cursor left/right/up/down.

PTZ control

MENU / ENTER Enter Menu.

Select/Enable a highlighted category/item.

ESC Stop current operation or return to previous mode.

AUDIO Change audio channel during monitoring/playback.

LOG Enter Log Search mode.

PTZ Enter PTZ control mode.

SEARCH Enter Search(Playback) mode.

SETUP Enter Setup mode.

PAUSE Pause during playback.

Fast reverse playback

Playback in reverse/forward direction

Fast forward playback.

FULL SCR

Change to full screen display of one channel during

playback.

Toggle to select and clear all area in Motion Detection

/Masking Setup.

Playback in slow motion

SKIP Reverse/forward jump in 5 minute intervals during

playback. Frame by frame advance/reverse during pause.

Speed adjustment during slow motion.

CH Change channels.

QUAD Select 4 channel display mode.

ZOOM Adjust zoom of PTZ camera.

Toggle between zoom 2x and normal view during

monitoring.

FREEZE Freeze screen during monitoring

SEQUENCE Automatic sequence display during monitoring.

FOCUS Adjust focus of PTZ camera

ID Set

Set ID of remote controller.

Same ID must be applied for the DVR and remote

controller.

☞While pressing the ID SET button and input the ID

using the numeral keys.

The ID must be set in 3 digits.(If DVR ID is “1” press

“001”)

PRESET Enter preset controls of PTZ

IRIS Adjust aperture of PTZ camera.

Introduction

※ Usage of Numeral Keys. (To input FUZ42 )

☞F : 333 →U : 88 →Z : 9999 →4 : Press 4 until it appears on screen →2 : Press 2

until it a

ear

on scre

- 10 -

2.1. Installation of Hard Disk Drives

※Compatible Hard Disk Drives : Samsung, Maxtor, Fujitsu, Western Digital, Seagate

Maximum of 2 Hard Disk Drives may be installed in the DVR.

Installation order.

Insert the HDD into the bracket(Bottom side up) and secure the HDD onto the bracket using 4 screws

and connect the Power Plug and IDE Cable into the HDD connectors.

※Adjust the Jumper Pin of the HDD to the Master or Slave position before installing the HDD.

If you are installing only one HDD, it must be installed in the Master HDD slot.

NSTALLATION

Master HDD

Slave HDD

Screws

Power Cable

(Master)

IDE Cable

(Master)

DVR FRONT

Power Cable

(Slave)

IDE Cable

(Slave)

Indice

Altri manuali TORCHVIEW Registratore digitale

TORCHVIEW

TORCHVIEW CMDVR-0402 Manuale utente

TORCHVIEW

TORCHVIEW CDVR-1608R Manuale utente

TORCHVIEW

TORCHVIEW CDVR-1608CDRW Manuale utente

Manuali Registratore digitale popolari di altre marche

FLIR

FLIR M3100E Series Manuale utente

VTRACKPRO

VTRACKPRO FPRO300 Manuale utente

Swann

Swann NVR-7085 models Manuale utente

XtendLan

XtendLan DVR-1670C Manuale utente

urmet domus

urmet domus 1093/004AHD Manuale utente

Holux

Holux M1 Manuale utente

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manuale utente

Whistler

Whistler D16VRS Manuale utente

Defender Security

Defender Security 82-20235 Manuale utente

MISUMI

MISUMI MP-WF100M Manuale utente

Speco

Speco D8HU Manuale utente

UST

UST DDR-E04AA Istruzioni per l’uso

Consolidated

Consolidated Digital Video Recorder Manuale utente

Mace

Mace DVR0404RW Guida rapida

RCA

RCA RTD315W Manuale utente

FSM

FSM Colibri Grande PRO Manuale utente

Hauppauge

Hauppauge HD PVR 2 Manuale utente

Identivision

Identivision ICR-PH161i PIONEER Manuale utente