3
KIT CONTENTS
Fuselage
Main Wing Set
Carbon Wing Tube
Vertical Tailplane
Horizontal Tailplane
Landing Gear Set
Tail Wheel Set
3 Blade Propeller
Spinner
Brushless outrunner 3648
45 Amp Brushless Speed Controller
LiPo 12v Charger (RTF ONLY)
LiPo: 14.8v 2200mAh 20C (RTF ONLY)
2.4Ghz Transmitter and Receiver (RTF ONLY)
Installed 2 x 9g & 2 x 18g Servo
Accessories, Screw and fixings Bags
READ THIS BEFORE BEGINNING ASSEMBLY
OF YOUR AIRCRAFT!
THIS IS NOT A TOY! Only to be used by people over
the age of 14 with RC flight experience. Serious
injury, destruction of property or even death may
result from the misuse of this product. This product
must be assembled by the end user to produce a
flying model. However it is beyond our control to
monitor the finished aircraft that you produce. Top
Gun Park Flite will in no way accept or assume
responsibility or liability for damages resulting from
the use of this user assembled product. This aircraft
should be flown in accordance with the BMFA safety
guidelines.
It is highly recommended that you join the BMFA in
order to be insured for third party damages and only
operate this aircraft at approved flying sites. Top
Gun Park Flite also highly recommend that you
practice model RC flight on one of the many
computer simulators such as Reality Craft Plane
Master. If you are not willing to accept ALL liability
for the use of this product please return it to the
place of purchase immediately.
PROPELLER
Keep your hands and face away from the
propeller as injury can occur. Keep loose
items that could get
entangled in the propeller away from the prop such
as loose clothing, pens and paper.
SMALL PARTS
This contains many small parts and should not be
left unattended near children as choking and serious
injury could result
BATTERIES
When misused, Lithium Polymer batteries are much
more volatile than Alkaline or NiMH. Please read
the charging instructions and Safety Notes on page
4, 14 & 15 as mishandling can cause serious injury
and fire.
WARRANTY
All warranty claims must be made with your proof of
purchase. Warranty is extended only to the original
purchaser of the aircraft kit.
INSPECTION
Carefully inspect all the parts in the kit Before you assemble,
should you find a manufacturing defect please contact the
retail outlet where this product was purchased.
ITEMS AND TOOLS REQUIRED
TO FINISH THIS MODEL
• 2.4Ghz 4/6 Channel Radio and
Recevier (not RTF)
• 2200mAh 2500mAh 14.8v LiPo
• Battery (not RTF)
• LiPo Battery Charger (not RTF)
• Small Pozidrive Screwdrive
• Small Flat Screwdriver
• Tape Measure
• Sticky Tape
• Hot Air Gun
• Thin Cynoacrylate
• Small File/Dremel
• Thread Lock
• Hook and Loop fastener
• 3mm Allen Key