3.1.2 Electrical safety
•Always check that the power supply corresponds to the voltage on the ratingplate.
•Power tool plugs must match the outlet. Never modify the plug in any way. Do not use adapter
plugs with earthed power tools. Unmodified plugs and matching outlets will reduce the risk of an
electric shock.
•Avoid body contact with earthed surfaces such as pipes, radiators, kitchen ranges and
refrigerators. There is an increased risk of an electric shock if your body isearthedor grounded.
•Do not expose power tools to rain or wet conditions. If water gets inside a power tool, it will
increase the risk of an electric shock and may damage the tool.
•Do not use any power tool with a damaged cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep the cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of an electric shock.
•When operating a power tool outdoors, use an extension cable suitable for outdoor use. Using
a cord suitable for outdoor use reduces the risk of an electricshock.
•If operating a power tool in a damp location is unavoidable, use a power supply protected by a
residual current device (RCD). Using an RCD reduces the risk of an electricshock.
3.1.3 Personal safety
•Stay alert, watch what you are doing and use common sense when operating a power tool. Do not
use a power tool when you are tired or under the influence of drugs, alcohol or medication. A
moment of inattention when operating a power tool may result in serious personal injury.
•Use personal protective equipment. Always wear eye protection. Using safety equipment such as
a dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed will
reduce the risk of personal injury.
•Avoid accidental starts. Ensure the switch is in the off position before connecting to the power
source. Carrying power tools with your finger on the switch or plugging in power tools when the
switch is in the on position makes accidents more likely.
•Remove any adjusting keys or spanners before turning on the power tool. A spanner or key
left attached to a rotating part of the power tool may result in personalinjury. Also ensure that
all auxiliary handles are intact.
•Do not over reach. Keep proper footing and balance at all times. This will allow for better
control over the power tool in unexpected situations.
•Dress properly. Do not wear loose clothing or jewelry. Keep loose hair, clothing and gloves away
from the power tool. Loose clothes, jewelry or long hair can become entangled in the moving parts
•If there are devices for connecting dust extraction and collection facilities, please ensure that
they are attached and used correctly. Using such devices can reduce a dust-related hazard.
3.1.4 Power tool use and care
•Do not expect the power tool to do more than it can. Use the correct power tool for what you
want to do. A power tool will achieve better results and be safer if used in the context for which
it was designed.
•Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken
switch is dangerous and must be repaired.
•Disconnect the plug from the power source before making adjustments, changing accessories,
or storing power tools. Such preventive safety measures reduce the risk of starting the power
tool accidentally.
•Store power tools, when not in use, out of the reach of children and do not allow people who are
not familiar with the power tool or these instructions to operate it. Power tools are potentially
dangerous in the hands of untrained users.
•Maintain power tools. Check for misalignment or jammed moving parts, breakages or any other
