Torrey L-EQ HS Series Manuale utente
REV 0 CODE: 13100907
OWNER’S MANUAL
PORTIONING SCALE
BEFORE OPERATING THIS SCALE, PLEASE READ THIS MANUAL THOROUGHLY.
L-EQ HS Series
2
Important warnings
Introduction
Installation guide
Name and location of parts
Keyboard
LCD display screen
How to operate
How to weigh a product
How to use “TARE” function.
How to use “kg” / “lb” / “oz” keys.
How to use the “PRINT” key.
How to use “REFERENCE ZERO”.
How to use the backlight.
How to use the alarm function.
PC communication
How to display weight measure on PC screen
Format of the data sent to the PC
Using Scale software
Power timer function.
Low battery indicator
Use of the battery
Other important messages that appear on the scale
Maintenance and cleaning
Troubleshooting guide
Technical specifications
Additional data
3
5
5
6
7
8
9
9
9
9
9
10
10
10
11
11
11
12
13
13
13
14
15
16
17
18
INDEX
L-EQ HS Series
1. In case you have any problem with the
scale, read the warranty conditions.
2. Do not open the scale your warranty will
be canceled.
3. Do not press the keyboard with any
sharp and/or pointed objects.
4. Use a VAC outlet exclusive for the scale,
avoiding overloads or voltage variations.
5. Do not wash the scale using flow of
water. This can damage the electronic
components. For more information read
“Maintenance and cleaning” section.
6. Protect the scale from insects; they can
damage the electronic components. Use
online solid products against insects.
7. Do not drop or hit the scale with the
product to be weighted, this will damage
the weight sensor.
3
Portioning Scale
IMPORTANT WARNINGS
8. Do not use solvents or detergents for
cleaning, use only a damp towel.
9. Do not place any fans or heaters directly
into the scale.
10. Do not place the scale where there is excess
moisture or dust.
11. Only authorized and qualified personnel
should inspect and repair the scale.
4
WARNING
Do not open the scale
Caution: to reduce the risk of short circuit in your
scale, do not remove the cover or substitute any
of the parts for others that are not original only
authorized distributor.
Battery should be recharged for 10Hrs before
using the scale for the first time.
IMPORTANT
IMPORTANT WARNINGS
L-EQ HS Series
Dear customer:
We appreciate that you have chosen this product. We assure you that you
will get the maximum satisfaction of the new acquisition for your business.
We suggest you to read carefully this manual and make sure to keep it at
hand for later consultations.
INSTALLATION GUIDE
INTRODUCTION
IMPORTANT NOTE: If, when performing the steps described above, the
scale shows the word "HELP" it means that it was mistreated and / or
hit during transport, which caused irreversible damage. If so, contact
your authorized dealer. It is also possible that the scale shows "HELP"
when it is lit with a product on the plate, in this case, remove the
weight from the scale, turn it off and then on again.
1. Unpack the scale and check that it is in good
condition. If you find any damage, notify your
authorized dealer immediately.
2. Place the scale in a place free of movements
and vibrations, make sure it is level, checking
that the four leveling feet hold the scale on
the surface where you have placed it and
that the leveling bubble (under the plate) is
centered. Adjust, tight or loose the leveling
feet until the bubble is in the center of the
circle.
3. Connect the AC/DC adapter (if used) to a
110/220VAC output.
4. Turn on the scale and observe in the viewer /
screen:
5
Portioning Scale
NAME AND LOCATION OF PARTS
3
4
5
6 7
1
8
1. CABINET: Stainless steel
resistant to corrosion.
2. PLATE: Food grade, stainless
steel with bent and rounded
borders.
3. PLATE HOLDER: Made with
high strength plastic.
4. KEYBOARD: Fast response,
legible and easy to handle
keyboard.
5. DISPLAY: Liquid crystal.
6. ADJUSTABLE LEVELING FEET:
Loose or tight up them to
adjust the scale.
7. JACK: DC power supply
connection, located in the
scale’s base.
8. LEVEL INDICATOR: Used as a
scale’s leveling reference.
9. POWER SUPPLY:
110VAC/6VDC or
220VAC/6VDC (included).
10. RS232 CONNECTOR: To
connect the scale with a PC
or printer using a RS232
cable.
11. TARE FOOTSWITCH
CONNECTION: To connect the
external tare footswitch. 9
6
2
10 11
L-EQ HS Series
KEYBOARD
Turn on the scale.
Turn off the scale.
Show the weight on the PC screen. Communication
through RS232.
Activate the TARA function.
Activate the ZERO function.
Show the weight in kg.
Show the weight in lb.
Show the weight in oz.
Increase the weight to be set for the weight alarm.
Decrease the weight to be set for the weight alarm.
Activates and sets the weight alarm.
7
Portioning Scale
LCD DISPLAY SCREEN
1234
5
6
7
8
9
1. CONNECTED ELIMINATOR INDICATOR: appears when the battery
eliminator is connected to the scale and in turn this is connected to a
110/220VAC outlet.
2. ACTIVE “ALARM” INDICATOR: means that a weight range has been set
for the alarm.
3. “ZERO” INDICATOR: Shown when the weight on the plate is zero.
4. "NET" INDICATOR: indicates that the "tare" function has been activated.
the readings shown correspond to the net weight.
5. “LOW” INDICATOR: Indicates that the weight on the plate is less than
the lower limit of the interval set for the alarm.
6. “HIGH” INDICATOR: Indicates that the weight on the plate is greater
than the upper limit of the interval set for the alarm.
7. WEIGHT UNIT INDICATOR: Displays the selected weight unit.
8. ALPHANUMERIC INDICATOR: Displays the weight and messages of the
scale.
9. LOW BATTERY INDICATOR: appears when the battery power is low and
indicates that it is necessary to recharge it.
8L-EQ HS Series
HOW TO OPERATE
Turn on the scale, place the product in the plate and the weight will be
shown in the display; the symbols “kg”, “lb” or “oz” will appear depending on
the unit previously selected.
When you want to eliminate the weight over the container, press the
“TARE” key and the display will start in zero. Now just weight the product.
To end this function, remove the weight from the container and press the
"TARE" key again.
9
The unit’s keys allow you to weight a product in kilograms, pounds or
ounces. If you weight a product in pounds and want to convert that weight
into kilograms, just press the “kg” key and the scale will convert it
automatically.
When you press the “PRINT” key, the scale will send the data shown in the
display to aPC.To activate this function, the scale should be connected to
the computer.
Portioning Scale
How to use the “PRINT” key
How to use “kg” / “lb” / “oz” keys
How to weight a product
How to use “TARE” function
How to use the alarm function
To activate the alarm function, press the “SET LIMIT” key, “HI LMT?” will be
shown; press the “HI” key to increase or the “LO” key to decrease the
highest limit value. Press again the “SET LIMIT” key, “LO LMT?” will be shown
and repeat the same procedure, press once again the “SET LIMIT” key to
save the alarms limits and start weighting.
10
How to use “REFERENCE ZERO”
If the scales shows weight in the display without having any product over
it, may be caused by voltage variations, rough use, etc. In this case, press
the “ZERO” key and the display will return back to zeros.
How to use the backlight
In case of having not enough light for a optimum visibility, use the scale’s
backlight to improve the legibility of the display’s data. To turn on the
backlight press this key:
L-EQ HS Series
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Torrey Scala
Torrey
Torrey L-EQ 5/10 Manuale utente
Torrey
Torrey W-LABEL Series Manuale utente
Torrey
Torrey PC Series Manuale utente
Torrey
Torrey LSQ-40L Manuale di istruzioni
Torrey
Torrey CRS-HD 200 Manuale utente
Torrey
Torrey PS Series Manuale utente
Torrey
Torrey CRS Series Manuale utente
Torrey
Torrey LSQ Series Manuale utente
Torrey
Torrey EQB-W Series Manuale utente
Torrey
Torrey QC Series Manuale utente
Torrey
Torrey CRS Series Manuale utente
Torrey
Torrey PPC Series Manuale utente
Torrey
Torrey L-PC SERIES Manuale utente
Torrey
Torrey FS 250/500 Manuale utente
Torrey
Torrey WLS Manuale utente
Torrey
Torrey QC Series Manuale utente
Torrey
Torrey EQB-50/100 Manuale utente
Torrey
Torrey LPC HS Series Manuale utente
Torrey
Torrey EQB Series Manuale utente
Torrey
Torrey WLS SERIES Manuale utente
