TorsionX XP-115 Multi-Port Power Pack (Updated 1/30/17) 3
Warnings
Hydraulic Hose:
Inspect hose for wear and damage prior to every use.
Only use twin line high pressure hydraulic hoses rated for 10,000 PSI with at
least a 3:1 safety factor.
The maximum operating pressure is 10,000 PSI - Do not exceed 10,000 PSI.
Do not let the hose kink, twist, curl or bend so tightly that oil flow within the hose is
blocked or reduced.
The minimum bending radius: R>5 inch.
Too small of a bending radius will kink and destroy the high pressure hydraulic
hose.
Before operating the hydraulic power pack, tighten all hydraulic hose connections with
the proper tools.
Do not overtighten.
Connections should be tightened securely and leak-free.
Over tightening can cause premature coupler thread failure.
Shut off the electric motor before breaking any hydraulic connections in the system.
Should a hydraulic hose ever rupture, burst, or need to be disconnected,
immediately shut off the hydraulic power pack.
Never attempt to grasp a leaking pressurized hose with your hands. The force of
the escaping hydraulic fluid could cause serious injury.
Do not subject the hose to potential hazards such as:
Fire
Sharp surfaces
Extreme heat or cold
Heavy impact
Hose material and coupler seals must be compatible with the hydraulic fluid.
Keep hoses away from contact with corrosive materials such as creosote-
impregnated objects and some paints and solvents.
Never paint a hydraulic hose.
Never paint hydraulic couplers.
Hose deterioration due to corrosive materials can result in premature failure and
serious personal injury.
XP-115 Multi-Port Power Pack
Do not exceed the maximum hydraulic pressure rating of 10,000 PSI.
Do not tamper with the internal high pressure relief valve.
Creating pressure beyond rated capacities can result in serious personal injury.
