Toshiba CS3330Bi Manuale utente

This specification subjects to change without notice.

D4134992A

CCD M o n o c h r o m e

Vi d e o C a m e r a

CS3330Bi

S E R I E S

CS3330Bi CS3330BLi

Spe ci fic ati on

CONT E NTS

Before use – General safety instructions

1. PRODUCT DESCRIPTION

………

..................................................................

2. FEATURES...................................................................................................

3. CONSTITUTION...........................................................................................

4. SPECIFICATIONS

4-1 Mechanica specifications

............................................................................

4-2 E ectrica specifications

................................................................................

5.APPEARANCES

5-1 Appearance of the camera head

..................................................................

5-2 Appearance of the camera head with mount meta fitting

..............................

5-3 Appearance of the camera contro unit for CCD camera (CS3330Bi)…….…

5-4 Appearance of the camera contro unit for CCD camera (CS3330BLi)……...

This specification subjects to change without notice.

D4134992A

BEFORE USE

GENERAL SAFETY INSTRUCTIONS

This instruction manual contains important information for the operator (user) and/or people in the

vicinity to avoid personal injury, or property damage.

• Prior to use, read this operation manual carefully to fully understand its instructions for correct use.

• After reading, keep this manual near the equipment for future reference.

WARNINGS & CAUTIONS

Definition of markings]

The meaning of each mark used in this instruction manual is given below.

Notes *1: Personal injury means wounds, burns, electric shocks, and others for which

hospitalization or long term care are not required.

*2: Material damage means any direct or consequential damage related to property or material loss.

WARNING

This mark warns the user that improper use may cause death or severe

personal injury of the user or people in the vicinity.

CAUTION

This mark warns the user that improper use may cause personal injuries

(*1) or material damages (*2) against the user or people in the vicinity.

This mark indicates what the user SHOULD NOT DO. The details are given adjacent the mark.

This mark indicates what the user MUST DO. The details are given adjacent the mark.

This specification subjects to change without notice.

D4134992A

●Handling Precautions

WARNING

unplug





 Immediately cea e u e of the equipment in the event of abnormality or malfunction.

If abnormal conditions are present, such as smoke, a burning smell, ingress of water or foreign

matter, or if the equipment is dropped or malfunctions, fire or electric shock may result.

If such abnormalities occur, disconnect the power plug from the outlet and contact your sales

representative.

Do not get wet





 Do not u e the equipment in location ubject to water pla he .

Otherwise, fire or electric shock may result.

Never pull apart





 Do not di a emble, repair, or modify the equipment.

Otherwise, fire or electric shock may result.

For internal repair, inspection, or cleaning, contact your sales representative.

Avoid





 Do not place anything on the equipment.

If metallic objects, liquid, or other foreign matter enters the equipment, fire or electric shock

may result.

Avoid





 Do not in tall the equipment in an un table or inclined location or location ubject to

vibration or impact.

Otherwise, the equipment may topple over and cause personal injury.

Do not touch





 During an electrical torm, do not touch the power cord or connection cable.

Otherwise, an electric shock may result.

Instruction





 U e the pecified power upply.

Use of an unspecified power supply may result in fire or electric shock.

Avoid





 Do not be handled roughly, damaged, fabricated, bent forcefully, pulled, twi ted, bundled,

place under heavy object or heated the power cord, connection cable.

Otherwise, fire or electric shock may result.

This specification subjects to change without notice.

D4134992A

CAUTION

Instruction





 Ob erve the following when in talling the equipment:

· Do not cover the equipment with a cloth, etc.

· Do not place the equipment in a narrow location where heat is likely to accumulate.

Otherwise, heat will accumulate inside the equipment, possibly resulting in a fire.

Avoid





 Do not place the equipment in location ubject to high moi ture, oil fume , team, or

du t.

Otherwise, fire or electric shock may result.

Avoid





 Do not in tall the equipment in location expo ed to direct unlight or humidity.

Otherwise, the internal temperature of the equipment will rise, which may cause a fire.

Avoid





 U e only pecified AC power cable and connection cable .

Otherwise, fire or electric shock may result.

Avoid





 When performing connection, turn off power.

When connecting the power cable or connection cable, turn off the equipment power.

Otherwise, fire or electric shock may result.

Avoid





 Do not expo e it camera head to any inten ive light ( uch a direct unlight).

Otherwise, its inner image pickup devise might get damaged.

Avoid





 Avoid hort-circuiting ignal output.

Otherwise, a malfunction may occur.

Avoid





 Avoid giving a trong hock again t the camera body.

If your camera is used in a system where its camera connector is subjected to strong repetitive

shocks, its camera connector is possible to break down. If you intend to use your camera in

such a situation, if possible, bundle and fix a camera cable in the place near the camera, and do

not transmit a shock to the camera connector.

Instruction





 Contact your ale repre entative to reque t periodic in pection and cleaning (every

approx. five year ).

Accumulation of dust inside the equipment may result in fire or electric shock.

For inspection and cleaning costs, contact your sales representative.

This specification subjects to change without notice.

D4134992A

CASES FOR INDEMNITY (LIMITED WARRANTY)

We hall be exempted from taking re pon ibility and held harmle for damage or lo e incurred by the

u er in the following ca e .

 In the case damage or losses are caused by fire, earthquake, or other acts of God, acts by a third party,

deliberate or accidental misuse by the user, or use under extreme operating conditions.

 In the case of indirect, additional, consequential damages (loss of business interests, suspension of business

activities) are incurred as result of malfunction or non-function of the equipment, we shall be exempted from

responsibility for such damages.

 In the case damage or losses are caused by failure to observe the information contained in the instructions in

this instruction manual and specifications.

 In the case damage or losses are caused by use contrary to the instructions in this instruction manual and

specifications.

 In the case damage or losses are caused by malfunction or other problems resulting from use of equipment or

software that is not specified.

 In the case damage or losses are caused by repair or modification conducted by the customer or any

unauthorized third party (such as an unauthorized service representative).

 Expenses we bear on this product shall be limited to the individual price of the product.





 About the item which does not have a publication in the specifications and manual of this product, it

considers as the outside for a guarantee.

RESTRICTION FOR USE



Should the equipment be used in the following conditions or environments, give consideration to safety

measures and inform us of such usage:

1. Use of the equipment in the conditions or environment contrary to those specified, or use outdoors.

2. Use of the equipment in applications expected to cause potential hazard to people or property, which

require special safety measures to be adopted.

 This product can be used under diverse operating conditions. Determination of applicability of equipment or

devices concerned shall be determined after analysis or testing as necessary by the designer of such

equipment or devices, or personnel related to the specifications. Such designer or personnel shall assure the

performance and safety of the equipment or devices.

 This product is not designed or manufactured to be used for control of equipment directly concerned with

human life (*1) or equipment relating to maintenance of public services/functions involving factors of safety

(*2). Therefore, the product shall not be used for such applications.

(*1): Equipment directly concerned with human life refers to:

· Medical equipment such as life-support systems, equipment for operating theaters.

· Exhaust control equipment for exhaust gases such as toxic fumes or smoke.

· Equipment mandatory to be installed by various laws and regulations such as the Fire Act or

Building Standard Law

· Equipment related to the above

(*2) Equipment relating to maintenance of public services/functions involving factors of safety refers to:

· Traffic control systems for air transportation, railways, roads, or marine transportation

· Equipment for nuclear power generation

· Equipment related to the above

This specification subjects to change without notice.

D4134992A

Usage Precautions

 Handle carefully

Do not drop the equipment or allow it to be subject to strong impact or vibration, as such action may cause

malfunctions. Further, do not damage the connection cable, since this may cause wire breakage.

 Environmental operating conditions

Do not use the product in locations where the ambient temperature or humidity exceeds the specifications.

Otherwise, image quality may be degraded or internal components may be adversely affected. In particular,

do not use the product in areas exposed to direct sunlight. Moreover, during shooting under high

temperatures, vertical stripes or white spots (noise) may be produced, depending on the subject or camera

conditions (such as increased gain). However, such phenomena are not malfunctions.

 Do not shoot under intense light.

Avoid intense light such as spot lights on part of the screen because it may cause blooming or smears. If

intense light falls on the screen, vertical stripes may appear on the screen, but this is not a malfunction.

 Occurrence of moiré

If you shoot thin stripe patterns, moiré patterns (interference fringes) may appear. This is not a malfunction.

 Do not expose the camera’s image-pickup-plane to sunlight or other intense light directly.

Its inner CCD (charge-coupled device) might be damaged.

 Occurrence of noise on the screen

If an intense magnetic or electromagnetic field is generated near the camera or connection cable, noise may

be generated on the screen. If this occurs, move the camera or the cable.

 Handling of the protective cap

If the camera is not in use, attach the lens cap to the camera to protect the image pickup surface.

 If the equipment is not to be used for a long duration

Turn off power to the camera for safety.

 Maintenance

Turn off power to the equipment and wipe it with a dry cloth.

If it becomes severely contaminated, gently wipe the affected areas with a soft cloth dampened with diluted

neutral detergent. Never use alcohol, benzene, thinner, or other chemicals because such chemicals may

damage or discolor the paint and indications.

If the image pickup surface becomes dusty, contaminated, or scratched, consult your sales representative.

 Disposal

When disposing of the camera, it may be necessary to disassemble it into separate parts, in accordance with

the laws and regulations of your country and/or municipality concerning environmental contamination.

This specification subjects to change without notice.

D4134992A

1. PRODUCT DESCRIPTION

Model CS3330Bi/BLi is monochrome video camera with charge coupled device (CCD). These

cameras are composed of camera head and camera controller (CCU).

2. FEATURES

The video cameras have the following technical features.

(1) igh resolution

A 380,000 pixel CCD incorporated in the unit provides horizontal resolution of 570 lines.

(2) igh reliability

Realize extremely low graphic distortion and after-images levels. Offers high reliability, high

stability, long life and resistance against impact and vibration.

(3) Compact and light weight

The camera head and camera control unit are separately designed. The camera head is designed

to minimize use of parts and is ultra-compact and light weight.

(4) External synchronization

The unit is automatically switched over between internal and external synchronization. When

HD and VD signals are input from an external device, the external synch is automatically set

and HD and VD signals are output.

(5) Electronic shutter

Variable speed electronic shutter (TV sync) with 8 steps from 1/60sec to 1/10,000sec. (standard

feature)

(6) Electronic lines display (CS3330BLi)

Video signals can be overlapped using two sets of vertical and horizontal lines which are

displayed as electronic lines on the monitor. In addition, there is also an option of displaying a

reticle mark on the monitor to conveniently position and size up the images.

3. CONSTITUTION

Camera head without lens

( includes 3m camera cable )

1 set

Camera control unit (CCU) 1 set

Accessories

(1) Video cable

(3C-2V ,with BNC plug on both ends 0.5m)

1 set

(2) AC cable(2.0m) 1 set

(3) Fuse(0.5A / 250V) 2 set

(4) Camera head mount metal fitting 1 set

(5) Lens mount screw 1 set

(6) adapter(3P-2P) 1 set

(7) Operation manual (this document) 1 copy

This specification subjects to change without notice.

D4134992A

4. SPECIFICATION

4-1 Mechanical specifications

Overall dimensions and weight

Camera head: Refer to the attached camera head diagram.

Camera control Unit: 220(w) x 60(H) x 240(D) mm (excluding rubber casters)

Mass : approx. 2.6 kg

Camera cable: 6.3mm(dia.) x 3 m length

Lens mount: C mount

4-2 Electrical specifications

TV system:

Based on EIA standard

Pickup Device: Interline transfer CCD ICX422AL

Effective pixels: 768(H) x 494(V) pixels

Unit cell size: 11.6(H) x 13.5(V) micro m

Sensing area: 8.8(H) x 6.6(V) mm

(Equivalent to type-2/3 normal optical image

size respectively.)

Scanning method: 525 lines, 2:1 interlace

Sync. system: automatic switching between

internal / external synchronization

Scanning frequency: horizontal; 15.734kHz

Vertical; 59.94Hz

Aspect rate: 4:3

Subject illumination:

Standard: 100 lx, F4(3100K),(AGC OFF, gamma=1.0)

Minimum: 0.3 lx, F1.4,(gamma=0.45 with maximum gain)

Video output: VS: 1.0V(p-p)/ 75 ohm

Horizontal resolution: 570 TV lines

Vertical resolution: 350 TV lines

S/N: 56dB (AGC OFF, gamma=1.0 )

External sync input:

Input level: 2 to 6 V(p-p) for both HD and VD signals

Input impedance: 1 k ohm for both HD and VD signals

Method: 2:1 interlace

Polarity: Negative

Pulse width: HD: 6.4 +/- 3 micro sec

VD: 150 to 800 micro sec

Repeat frequency: fH =15.734 kHz±2%

fv =2 fH/525

Scanning lines: 525 lines

This specification subjects to change without notice.

D4134992A

Phase difference: The phase difference between the trailing edge

of VD and the trailing edge of HD must be as

shown below.

Output signal: HD,VD negative polarity

Level: 3.5 to 4.5V(p-p) / 1k ohm terminated

8.0 to 9.0V(p-p) / high

Pulse width: HD: 6.36±0.5 micro sec

VD: 572±5 micro sec

Repeat frequency: fH =15.73426 kHz

fv =2 fH/525

Scanning lines: 525 lines

Output circuit:

Electronic line display or reticle (

CS3330BLi ONLY

)

NO. of lines: 2 horizontal lines, 2 vertical lines

Movable range: Entire monitor screen

Line width: Horizontal line: 1 scanning line/field

Vertical line: approx. 0.5 micro sec

Polarity : White(POSI) / black(NEGA) selectable

ON/OFF: switching

Electronic line / reticle: Internal selector switch

(Factory preset is electronic line.)

Gamma: 0.45/1 selectable

AGC: ON/OFF switching

field

t2=1/fH

2 +/-5 micro sec

t1＝0+/-5 micro sec

field

TD62504F

ohm

+9V

This specification subjects to change without notice.

D4134992A

Electronic shutter: ON/OFF switching

(TV synchronization):

Shutter speed: Selectable at 1/60sec, 1/125sec, 1/250sec,

1/500sec, 1/1,000sec, 1/2,000sec,1/4,000sec,

(during exposure): 1/10,000sec and flicker less

CCD operation mode: frame store mode

Power supply: AC100V +/-10%, 50/60Hz,150mA ± 20%

Ambient condition:

Temperature: From 0 through 40 degrees

Humidity: From 30 through 90% (No condensing)

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Toshiba Telecamera di sicurezza

Toshiba

Toshiba 625012200G Manuale utente

Toshiba

Toshiba IK-7200A Manuale utente

Toshiba

Toshiba IK-65WDA Manuale utente

Toshiba

Toshiba IK-542XD Manuale utente

Toshiba

Toshiba IK-644A Manuale utente

Toshiba

Toshiba IK - TF7H Manuale utente

Toshiba

Toshiba IK-DP30A Manuale utente

Toshiba

Toshiba IK-527A Manuale utente

Toshiba

Toshiba IK-629A Manuale utente

Toshiba

Toshiba IK-6550A - Analog Camera, 540 TV Lines Manuale utente

Toshiba

Toshiba IK-WB15A - IP Network Camera Manuale utente

Toshiba

Toshiba IK-TF7C Manuale utente

Toshiba

Toshiba IK-WB80A Manuale utente

Toshiba

Toshiba IK-DF02A Manuale utente

Toshiba

Toshiba IK-WR12A Manuale utente

Toshiba

Toshiba CCD Monochrome Camera IK-539A Manuale utente

Toshiba

Toshiba IK-52V Manuale utente

Toshiba

Toshiba IK-HR1S Manuale utente

Toshiba

Toshiba IK-WB02A - PoE Network Camera Manuale utente

Toshiba

Toshiba IK-C41R2 Manuale utente

Toshiba

Toshiba IK-WD12A Manuale utente

Toshiba

Toshiba IK-WB15A - IP Network Camera Manuale utente

Toshiba

Toshiba IK-6210A Manuale utente

Toshiba

Toshiba IK-1000 - Starlight Color Video Camera CCTV Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente