Toshiba IK-WB30A Manuale utente

NETWORK CAMERA

Model: IK-WB30A

Quick Start Guide and Important Safeguards

This guide describes the hardware installation.

Refer to the user's manual (PDF ﬁle) contained in the CD-ROM for settings, operations

and other information.

The application Adobe Reader is needed to view PDF ﬁles. If you do not have this

application, download it from the Adobe Systems Incorporated website.

For information on our latest products and peripheral devices, refer to the following

Website:

http://www.toshibasecurity.com

If the URL changes, refer to the Toshiba website (http://www.toshiba.com/tai/products/

prod_biz.jsp).

Introduction

FCC (USA)-INFORMATION

NOTE: This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Shielded interface cables must be used in order to comply with emission limits.

USER-INSTALLER CAUTION: Your authority to operate this FCC veriﬁed

equipment could be voided if you make changes or modiﬁcations not expressly

approved by the party.

Thank you for purchasing the IK-WB30A Network Camera. Before you start using

the camera, read this quick start guide carefully to ensure correct usage. Once you

have ﬁnished reading this quick start guide, keep it in a convenient place for future

reference.

The design, speciﬁcations, software, and quick start guide contents are subject to

change without prior notice.

Terms and Trademarks

The term "OS" is used in this manual to indicate operating systems compatible

with this product.

-- Windows®XP: Microsoft® Windows®XP operating system

-- Windows Vista®: Microsoft®Windows Vista®Business operating system

The formal name of Windows®is Microsoft®Windows®Operating System.

Microsoft®, Windows®and Windows Vista®are trademarks or registered

trademarks of Microsoft®Corporation in the United States and other countries.

Adobe is a registered trademark and Adobe Reader is a trademark of Adobe

Systems Incorporated.

Other product names appearing in this quick start guide may be trademarks or

registered trademarks of their respective holders.

NOTE

The performance of the network camera may vary depending on the network

environment.

Table of Contents

Introduction

Introduction....................................................................................................... 2

Terms and Trademarks ..............................................................................................3

Table of Contents.............................................................................................. 4

IMPORTANT SAFEGUARDS ........................................................................... 5

NOTES ON USE AND INSTALLATION............................................................ 9

Setting the Network Camera Environment ..................................................... 10

Items needed for network camera monitoring.........................................................10

Contents ..........................................................................................................11

Physical Description ....................................................................................... 12

Hardware Installation...................................................................................... 13

Network Deployment ...................................................................................... 14

Assigning IP Address...................................................................................... 16

Retrieving Images........................................................................................... 17

Quick Start Guide

IMPORTANT SAFEGUARDS

1. Read Instructions

Read all the safety and operating instructions before operating the product.

2. Retain Instructions

Retain the safety instructions and user's manual for future reference.

3. Warnings

Comply with all warnings on the product and in the user's manual.

4. Follow Instructions

Follow all operating and use instructions.

5. Cleaning

Disconnect this video product from the power supply before cleaning.

6. Attachments

Do not use attachments not recommended by the video product manufacturer

as they may pose safety risks.

7. Water and Moisture

Do not use this video product near water. Some examples are: near a bath tub,

wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming

pool.

8. Accessories

Do not place this video product on an unstable cart, stand, tripod, bracket

or table. The video product may fall, causing serious injury to a person, or

serious damage to the product. Use only with stand, tripod,bracket,or table

recommended by the manufacturer, or sold with the video product. Any

mounting of the product should follow the manufacturer's instructions, and

should use a mounting accessory recommended by the manufacturer.

9. Ventilation

This video product should never be placed near or over a radiator or heat

ventilation so that the camera temperature operates within the recommended

temperature range.

IMPORTANT SAFEGUARDS (Cont.)

10. Power Sources

This video product should be operated only from the type of power source

indicated on the information label. If you are not sure of the type of power

supply at your location, consult your product dealer.

11. Power-Cord Protection

Power cords should be routed so that they are not likely to be walked on or

pinched by items placed upon or against them. Pay particular attention to cords

at plugs, screws and the point where they exit the product.

12. Installation

Install this video product on a secure part of the ceiling or wall. If installed on an

unsecured location, the camera could fall causing injury and damage.

13. Lightning

For additional protection on this video product during a lightning storm, or when

it is left unattended and unused for long periods of time, unplug it from the wall

outlet and disconnect the power supply and cable system. This will prevent

damage to the video product due to lightning and power-line surges. If lightning

occurs, do not touch the unit or any connected cables in order to avoid electric

shock.

14. Overloading

Do not overload the power supply or extension cords as this can result in a risk

of ﬁre or electric shock.

15. Object and Liquid Entry

Never push objects of any kind into this video product through openings as they

may touch dangerous electrical points or short-out parts that could result in a

ﬁre or electrical shock. Never spill liquid of any kind on the video product.

16. Servicing

Do not attempt to service this video product yourself as opening or removing

covers may expose you to dangerous electrical or other hazards. Refer all

servicing to qualiﬁ ed service personnel.

17. Damage Requiring Service

Disconnect this video product from the power supply and refer servicing to

qualiﬁed service personnel under the following conditions.

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the video product.

c. If the video product has been submerged in water.

d. If the video product does not operate normally by following the operating

instructions in the user's manual. Adjust only those controls that are covered

by the user's manual as an improper adjustment of other controls may result

in damage and will often require extensive work by a qualiﬁ ed technician to

restore the video product to its normal operation.

e. If the video product has been dropped or the cabinet has been damaged.

f. When the video product exhibiting a distinct change in performance which

indicates a need for service.

18. Replacement Parts

When replacing parts be sure the service technician uses parts speciﬁed

by the manufacturer or have the same characteristics as the original part.

Unauthorized substitutions may result in ﬁre, electric shock or other hazards.

19. Safety Check

Upon completion of any service or repairs to this video product, ask the service

technician to perform safety checks to determine that the video product is in

proper operating condition.

IMPORTANT SAFEGUARDS (Cont.)

CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning ﬂash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of uninsulated

"dangerous voltage" within the product's enclosure that may be of

sufﬁcient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

WARNING:

TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

FIELD INSTALLATION MARKING:

WORDED: “THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE

PERSON AND SHOULD CONFORM TO ALL LOCAL CODES.”

NOTES ON USE AND INSTALLATION

Do not aim the camera at the sun

Never aim the camera at the sun even with the camera power off.

Do not shoot intense light

Intense light such as a spotlight may cause a bloom or smear. A vertical stripe

may appear on the screen. However, this is not a malfunction.

Treat the camera with care

Dropping or subjecting the camera to intense vibration may cause it to

malfunction.

Never touch internal parts

Do not touch the internal parts of the camera other than the parts speciﬁed.

Keep the camera installation away from video noise

If cables are wired near electric lighting wires or a TV set, noise may appear in

images. In this event relocate cables or reinstall equipment.

Check the ambient temperature and humidity

Avoid using the camera where the temperature is hotter or colder than the

speciﬁed operating range. Doing so could affect the internal parts or cause the

image quality to deteriorate. Special care is required to use the camera at high

temperature and humidity.

Should you notice any trouble

If any trouble occurs while you are using the camera, turn off the power and

contact your dealer. If you continue to use the camera when there is something

wrong with it, the trouble may get worse and an unpredictable problem may

occur.

Setting the Network Camera Environment

Items needed for network camera monitoring

Administrator's personal computer

The personal computer that allows setting, operating, monitoring and other

functions with the network camera is called the "administrator's personal

computer" in this guide.

* The personal computer for viewing monitored images is called the "user's

personal computer" in this quick start guide. The network camera can be

viewed by more than one personal computer at the same time.

Recommended personal computer system requirements:

-- Windows®XP, or Vista Business (Windows 7 is due to support in the future.)

-- Internet Explorer Ver 7.0 or 8.0

-- CPU: Minimum of 2GHz CPU

-- Memory: 1GB RAM and 512MB Graphics Adapter

Connection equipment such as Ethernet cables, and hub or router.

-- The LAN cable type differs depending on the connection method.

Camera search application "Installation Wizard"

-- Install this application from the CD-ROM supplied as an accessory (Double-click

"Setup.exe" in the CD-ROM and install the application by following the onscreen

instructions.)

-- This application is the tool which gets to know the IP address of a camera. If this

application is used, the IP address of a camera can be known easily.

Altri manuali per IK-WB30A

Indice

Altri manuali Toshiba Telecamera di sicurezza

Toshiba

Toshiba IK-DP20A Manuale utente

Toshiba

Toshiba IK - TF1 Manuale utente

Toshiba

Toshiba IK-WB11A Manuale operativo e di manutenzione

Toshiba

Toshiba IK-WB01A Manuale utente

Toshiba

Toshiba IK-TU40A Manuale utente

Toshiba

Toshiba 6410A - CCTV Camera Manuale utente

Toshiba

Toshiba IK-52N Manuale utente

Toshiba

Toshiba IK-WB80A Manuale utente

Toshiba

Toshiba IK-WR01A Manuale utente

Toshiba

Toshiba IK-TF7 Manuale utente

Toshiba

Toshiba CCD Color Camera IK-645A Manuale utente

Toshiba

Toshiba IK-629A Manuale utente

Toshiba

Toshiba CCD Monochrome Camera IK-539A Manuale utente

Toshiba

Toshiba CleverDragon CSCV90BC3 Manuale utente

Toshiba

Toshiba IK-HD1H Manuale utente

Toshiba

Toshiba IK-TF9P Manuale utente

Toshiba

Toshiba IK-WR31A Manuale utente

Toshiba

Toshiba IK-DF02A Manuale utente

Toshiba

Toshiba DF02A - Day/Night Mini-Dome Color Camera... Manuale utente

Toshiba

Toshiba IK-TF5C Manuale utente

Toshiba

Toshiba IK-527A Manuale utente

Toshiba

Toshiba IK-WP41A Manuale utente

Toshiba

Toshiba IK-WR05A Manuale utente

Toshiba

Toshiba WR01A - PoE Vandal Resistant Network Dome... Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente