TOTALINE BASIC 1H Manuale utente
®
Operating Manual
Mode d'emploi
Manual de Uso
Totaline ®Basic 1H/1C & 2H/1C
Non-Programmable Thermostats
Thermostat non programmables
Termostatos no programables
570-207 IIIIIIIIIIIIIIIIIIIIIIII
69-2256EFS
Totaline Basic 1H/1C & 2H/1C
This manual covers the following models:
P310-0110: For 1-Heat/1-Coot systems
P310-0210: For 2-Heat /1-Cool heat pump systems
(Remove the thermostat from its wallplate to find the model number.)
CAUTION: EQUIPMENT DAMAGE HAZARD.
To prevent possible compressor damage, do not use Cooling mode when the
outdoor temperature is below 50 °F (10 °C).
E0r assistance with this product please visit www.totaline.com
Read and save these instructions.
® U.S. Registered Trademark. Patents pending.
Operating Manual 570-207
i_1qFJ__
Overview
Thermostat features ............................. 1
Quick reference to controls .................. 2
Quick reference to display. ................. 3
Operation
System switch (Heat/Cool) ................... 4
Fan switch (Auto/On). ........................... 5
Temperature controls ............................ 6
Compressor protection ......................... 7
Appendices
Battery replacement ............................. 8
In case of difficulty ................................ 9
Customer assistance .......................... 10
Limited two-year warranty ................... 11
Totaline Basic 1H/1C & 2H/1C
Your new Totaline thermostat has been designed to give you many years of
reliable service and easy-to-use, push-button climate control.
Features
• Backlit display is easy to read
• Displays ambient (measured) temperature at all times
• One-touch access to setpoint temperature
• Built-in compressor protection
Operating Manual 570-207
f2Tnm_IT__ i_ _ _
Screen
Lit for 12 seconds when
you press any button. Up/Down buttons
Press to adjust temperature
System switch (see page 4)
• Cool: System is in Cooling mode.
• Off: System is off.
• Heat: System is in Heating mode.
•Em Heat: System is in Emergency Heat mode.
Fan switch (see page 5)
• On: Fan runs continuously.
• Auto: Fan runs onlywhen heating or cooling is
activated.
Totaline Basic 1H/1C & 2H/1C
Low-battery warning (see page 8)
System status
•Cool @ : Cooling is activated. *
• Heat 8 : Heating is activated. *
• Stg2: Auxiliary heat is activated. **
Setpoint indicator
Appears when the setpoint
temperature is displayed.
Temperature display
The ambient (measured)
temperature is normally
displayed. To view the
setpoint temperature, press
either of the temperature
adjustment buttons once.
The setpoint temperature
will appear for five seconds.
* If Heat 8 or Cool _ is flashing, compressor protection is engaged (see page 7).
** Applies to P310-0210 model only.
Operating Manual 570-207
Use the System switch to place the system in
one of the following modes.
• Cool: System is in Cooling mode.
• Off: System is off.
• Heat: System is in Heating mode.
• Em Heat: System is in Emergency Heat
mode. Only auxiliary heating can be
activated. The compressor is disabled. (This
mode is available on the P310-0210 model
only.)
CAUTION: EQUIPMENT DAMAGE HAZARD
Do not use Cooling mode when the outdoor temperature is below 50 °F (10 °C).
!ii
Totaline Basic 1H/1C & 2H/1C
i_/ o i' ii
l__J o ,, iii
Use the Fan switch to select the fan
operation.
•Auto: The fan runs only when heating
or cooling is actually taking place
(commonly used setting).
• On: The fan runs continuously. Use
this setting for improved air circulation
or for more efficient air cleaning.
Operating Manual 570-207
_ Press the Up or Down button once to
i!_ _ display the setpoint temperature.
0_ Press either button more than once to
•change the setpoint.
Totaline Basic 1H/1C & 2H/1C
I:t'!'11I11_E@liil_
Your thermostat has a feature that helps prevent damage to the compressor of
your air conditioning or heat pump system. Because damage can occur if the
compressor is restarted too soon after shutdown, this feature forces the
compressor to wait 5 minutes before restarting. During the wait time, the message
Cool e or Heat _ flashes on the screen. When the safe wait time has elapsed,
the message stops flashing and the compressor turns on.
Altri manuali per BASIC 1H
1
Questo manuale è adatto per i seguenti modelli
6
Indice
Lingue:
Altri manuali TOTALINE Termostato
TOTALINE
TOTALINE 1 For All Manuale utente
TOTALINE
TOTALINE P374-1900 Manuale utente
TOTALINE
TOTALINE Gold P274-1100 Manuale utente
TOTALINE
TOTALINE P374-1 900 Manuale utente
TOTALINE
TOTALINE P374-2300FM Manuale utente
TOTALINE
TOTALINE EZ3 Manuale utente
TOTALINE
TOTALINE Intellistat Manuale utente
TOTALINE
TOTALINE P700U-21NHP Manuale utente
TOTALINE
TOTALINE P710U-21PHP Manuale utente
TOTALINE
TOTALINE 1 For All Manuale utente
TOTALINE
TOTALINE P374-2300FM Manuale utente
TOTALINE
TOTALINE P474-1100RF Manuale utente
TOTALINE
TOTALINE P374-1500 Manuale utente
TOTALINE
TOTALINE Easy 1H/1C Manuale utente
TOTALINE
TOTALINE 1 For All Manuale utente
TOTALINE
TOTALINE P374-1100FM Manuale utente
TOTALINE
TOTALINE Easy 1H/1C Manuale utente
TOTALINE
TOTALINE Deluxe 1H Manuale utente
TOTALINE
TOTALINE P474-1020 Manuale utente
TOTALINE
TOTALINE P374-1000 Manuale utente
