Touch Dynamic DT-07 Manuale utente

DT-07

User Guide for Integrators

Version 1.0 2

Revision History

Version

Date

Description

1.0

21 May 2014

Draft release

Version 1.0 3

No part of this document may be reproduced, distributed, translated, or stored in any form without

the prior written permission of Touch Dynamic Inc. All brands and product names mentioned herein

may be trademarks or registered trademarks of their respective owners. Product specifications are

subject to change without prior notice.

Disclaimer

The contents of this document are provided as is. Touch Dynamic Inc. makes no representations or

warranties with respect to the contents herein and specifically disclaims any express or implied

warranties of merchantability or fitness for any particular purpose. Touch Dynamic Inc. reserves the

right to revise this document at any time without prior notice.

Version 1.0 4

Regulatory Information

FCC Statement

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. Changes or

modifications not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV technician for help

The FCC permits a maximum SAR value of 1.6 W/kg averaged over one gram of tissue. For body

worn operation, this device has been tested and meets the FCC RF exposure guidelines when used

with an accessory that contains no metal. The highest SAR value of this device (FCC ID: VRI-B195),

tested for typical body worn operation, is 0.495 W/kg. Use of other accessories may not ensure

compliance with FCC RF exposure guidelines.

Version 1.0 5

Safety Information

Please read the following information carefully before using the device for the first time, and keep

this User Guide in a safe place for future reference.

Always treat the device with care and keep it in a clean and dust-free environment.

Do not expose the device to extremely hot, cold or humid environment. The operation

temperature is from –10°C to 50°C.

Do not use the device in wet or rainy conditions.

Do not charge the device in extremely hot (> 40°C) or cold conditions (< 0°C).

Do not attempt to disassemble or modify the device including the charger.

Do not operate the device when your hands are wet.

Do not insert foreign objects into the openings of the device.

Use only the adaptor and battery approved for the device.

The adapter shall be installed near the device and shall be easily accessible.

Do not use the adaptor if the power cord or plug is damaged.

Install the cradle on a flat and stable surface.

Do not disassemble, crush or puncture the battery.

Do not expose the battery to high temperatures.

Do not let battery terminals touch other metal objects that could lead to short-circuit of the

battery.

Do not dispose of the battery in fire or water.

Dispose of used battery properly according to local laws and regulations.

The device shall only be connected to a USB interface of version 2.0 or higher. The connection

to so called power USB is prohibited.

Version 1.0 6

Contents

Revision History................................................................................................................................................. 2

Copyright ........................................................................................................................................................... 3

Disclaimer.......................................................................................................................................................... 3

Regulatory Information ...................................................................................................................................... 4

Safety Information.............................................................................................................................................. 5

1. Product Specifications ............................................................................................................................... 9

2. Device Overview...................................................................................................................................... 12

3. Getting Started......................................................................................................................................... 14

3.1 Installing and Removing the Battery................................................................................................ 14

3.1.1 Installing the Battery ................................................................................................................ 14

3.1.2 Removing the Battery .............................................................................................................. 14

3.2 Battery Charging.............................................................................................................................. 14

3.2.1 Charging the Device ................................................................................................................ 14

3.2.2 Charging the Spare Battery ..................................................................................................... 14

3.3 LED Status Description.................................................................................................................... 15

3.4 Powering the Device On and Off..................................................................................................... 15

3.5 Suspending the Device.................................................................................................................... 15

3.6 Viewing Device Information............................................................................................................. 15

4. Admin Mode and User Mode................................................................................................................... 16

4.1 Configuring User Mode Applications ............................................................................................... 16

4.2 Configuring Auto-launch Application................................................................................................ 17

4.3 Changing the Operating Mode ........................................................................................................ 17

4.3.1 Switching to the User Mode......................................................................................................... 17

4.3.2 Switching the Operating Mode Temporarily................................................................................. 17

4.4 Changing the Admin Password........................................................................................................ 17

5. Using Wi-Fi .............................................................................................................................................. 18

5.1 Turning Wi-Fi On or Off.................................................................................................................... 18

5.2 Setting Wi-Fi Boot Up State............................................................................................................. 18

5.3 Connecting to WLAN ....................................................................................................................... 18

5.4 Unlocking/ Disconnecting WLAN..................................................................................................... 18

5.5 Configuring Roaming Trigger Level................................................................................................. 19

5.6 Configuring Periodic Keep-alive ...................................................................................................... 19

5.7 Configuring Auto Retry WLAN......................................................................................................... 19

5.8 Viewing Network Information........................................................................................................... 20

6. Using Bluetooth ....................................................................................................................................... 21

6.1 Bluetooth Profiles............................................................................................................................. 21

6.2 Connecting to a Bluetooth Device ................................................................................................... 21

6.3 Setting Bluetooth Boot Up State...................................................................................................... 21

6.4 Changing the Bluetooth Name ........................................................................................................ 21

6.5 Making the Device Discoverable ..................................................................................................... 22

Version 1.0 7

6.6 Modifying Bluetooth Settings in User Mode..................................................................................... 22

6.7 Unpairing a Bluetooth Device.......................................................................................................... 22

7. Using NFC ............................................................................................................................................... 23

7.1 Turning on NFC ............................................................................................................................... 23

7.2 NFC Sample Application.................................................................................................................. 23

7.2.1 Scanning NFC tags...................................................................................................................... 23

7.2.2 Writing NFC tags.......................................................................................................................... 23

7.2.3 Changing NFC Default Application.............................................................................................. 23

8. Configuring General Settings................................................................................................................... 24

8.1 Changing Sound Settings................................................................................................................ 24

8.2 Changing Display Settings............................................................................................................... 24

8.2.1 Adjusting Brightness................................................................................................................ 24

8.2.2 Changing Wallpaper ................................................................................................................ 24

8.2.3 Enabling Auto-rotate screen .................................................................................................... 24

8.2.4 Adjusting Screen timeout......................................................................................................... 24

8.2.5 Adjusting Font Size.................................................................................................................. 24

8.2.6 Hiding System Bar................................................................................................................... 25

8.3 Changing Key Definition .................................................................................................................. 25

8.4 Viewing Storage Information............................................................................................................ 25

8.5 Changing Battery Charging Policy................................................................................................... 25

8.6 Managing Applications..................................................................................................................... 25

8.7 Changing Security Settings ............................................................................................................. 26

8.7.1 Changing Screen Lock Settings .................................................................................................. 26

8.7.2 Installing Certificates.................................................................................................................... 26

8.8 Changing Language and Input ........................................................................................................ 26

8.8.1 Changing Language .................................................................................................................... 26

8.8.2 Changing Keyboard Settings....................................................................................................... 26

8.9 Adjusting Date & Time..................................................................................................................... 27

9. Resetting the Device................................................................................................................................ 27

9.1 Soft Reset........................................................................................................................................ 27

9.2 Clean Reset..................................................................................................................................... 27

10. Enabling Developer Options................................................................................................................ 28

11. Performing System Backup & Restore................................................................................................ 28

11.1 Performing System Backup............................................................................................................. 28

11.2 Performing System Restore............................................................................................................. 29

12. Transferring Files through USB ........................................................................................................... 29

13. Performing Firmware Upgrade ............................................................................................................ 29

14. Using Remote Assistant....................................................................................................................... 30

14.1 Introduction...................................................................................................................................... 30

14.2 Establishing a remote session from the tablet................................................................................. 31

14.2.1 Connecting to the Remote Assistant Server............................................................................ 31

14.2.2 Advanced Remote Assistant Settings...................................................................................... 32

14.3 Establishing a Remote Session from a Computer........................................................................... 32

14.4 Disconnecting a Remote Session.................................................................................................... 33

14.5 Using Shortcut Keys ........................................................................................................................ 34

14.6 Introducing the Remote Assistant Features..................................................................................... 35

14.6.1 Viewing Device Information ..................................................................................................... 35

Version 1.0 8

14.6.2 Refreshing the Control Screen ................................................................................................ 35

14.6.3 Upgrading OS Software........................................................................................................... 35

14.6.4 Updating Remote Assistant ..................................................................................................... 37

14.6.5 Changing the Controller........................................................................................................... 39

14.6.6 File Transfer............................................................................................................................. 40

15. MSR Expansion Module ...................................................................................................................... 41

15.1 Using the MSR..................................................................................................................................... 41

15.2 Configuring MSR Settings ............................................................................................................... 41

16. Bundled 3rd Party Applications............................................................................................................. 49

17. Application Development..................................................................................................................... 50

17.1 Android SDK.................................................................................................................................... 50

17.2 Installing USB Driver........................................................................................................................ 50

17.3 Installing Applications ...................................................................................................................... 50

17.4 Extra API Support & Sample Code.................................................................................................. 50

MSR API library ....................................................................................................................................... 51

MSR Sample Program............................................................................................................................. 51

Version 1.0 9

1. Product Specifications

Handheld Terminal

Item

Specification

Processor

Cortex A5 1.2GHz Quad Core processor

Flash

4GB NAND Flash

RAM

1GB DDR2 RAM

LCM

7”TFT 1024 x 600 256K Colour LCD

Touch panel

Capacitive multi-touch touch panel

Hardness 7H

Memory expansion

MicroSD card slot

Support up to 32GB

WLAN

802.11b/g/n

WPAN

Bluetooth 3.0

WWAN

3.75G (Optional)

1 x SIM card slot

GPS

Assisted GPS (Optional)

NFC

Frequency: 13.56MHz

Support ISO14443A/B, MIFARE, NFC Forum tags, Felica

Sensors

Ambient light sensor

G-sensor

Proximity sensor

Hall sensor

Camera

Rear camera 5MP with LED flash

Front camera 2MP

LED Indicator

Power LED

Vibrator

Built-in vibrator

Audio

Mono speaker

Microphone

3.5mm headset jack

Keys

1 x Power Key

2 x Configurable Shortcut Key

Keys

Power key, Volume up/down key, Reset key

USB

USB2.0

Micro-USB connector

Main battery

Removable 4960mAh Lithium smart battery

Secondary battery

Lithium polymer battery for RAM backup

Battery life

Communication Time: 6 hours (Screen on. Wi-Fi data

communication every 6 seconds.)

Standby Time: 100 hours (LCD off, Wi-Fi connected, Keep alive

on)

Charging

Charging cradle with device slot and spare battery slot

Intelligent charging system

Battery charging time to 70%: 1.5 hrs

Module expansion

40-pin connector

External Module: Add-on MSR module

Dimension

210mm x 132mm x 21.4mm

Weight

570g typ.

IP Rating

IP54

Drop Test

2 cycle drops of 6 sides/ 4 corners from 1.2m onto concrete.

ESD

Contact discharge 6KV Air discharge 12KV

Operating temp.

-10 to +40 deg C

Version 1.0 10

Storage temp.

-20 to +65 deg C

Operating humidity

10% to 95%

Storage humidity

5% to 95%

Cradle

Item

Specification

Charging slot

1 x Tablet slot, 1 x spare battery slot

AC/DC adaptor

AC IN: 100-240V DC OUT: 5.9V 3A

Indicator

1 x Green LED (Cradle power status)

1 x Red/Green LED (spare battery charging status)

USB connector

USB type B connector

Dimension

106.2mm x 73.5mm x 97.2mm

Weight

450g typ.

Operating temp.

0 to +40 degree C

Storage temp

-20 to +65 degree C

Operating humidity

10% to 95%

Storage humidity

5% to 95%

Software Specification

Item

Specification

Operating system

Android OS 4.1.2

Kernel

Linux 3.4.0

File system

Ext4 flash file system for eMMC

FAT32 support for SD card

Bluetooth

Profiles supported: GAP, SPP, GOEP, OPP, A2DP, AVRCP, HID

Wi-Fi

Support WEP, WPA-PSK, WPA2-PSK, 802.1x EAP security by WPA

supplicant

Audio codecs

OGG decoders,AMR codec (for video recording)

Video codecs

MPEG4 codec only (for video recording)

Image formats

JPEG, PNG

Wi-Fi

Single SSID lock. No neighbour network appears in search list

Option to keep WiFi connected even when system is in sleep mode

WiFi keep alive mechanism in OS sleep mode to avoid access point

terminating the session after timeout

Auto/manual retry WiFi re-connection after out-of-coverage

Fast & seamless roaming

Configurable roaming trigger level

Configurable WiFi status at boot up

Configurable WiFi retry interval

Operating mode

Admin mode & User mode

Admin mode for installing programs and configuring device

User mode has limited rights for end user operations

Not able to modify WiFi connection settings

Option to disable Bluetooth pairing

Not able to modify NFC settings

Not able to install and uninstall applications

Not able to access Developer options

Launcher Config

Select applications to show or hide in Admin and User mode

Select applications for auto-launch upon booting up

Remote desktop

Bundle 3rd party remote desktop client –2X RDP Client

Support Remote Desktop Protocol with auto-logon.

Backup / Restore

Selectable backup and restore through SD card

Backup/restore of system/application/data

Indice

Altri manuali Touch Dynamic Tavoletta

Touch Dynamic

Touch Dynamic Quest Tablet Manuale utente

Touch Dynamic

Touch Dynamic Quest VIII Manuale utente

Touch Dynamic

Touch Dynamic Quest VIII Manuale utente

Touch Dynamic

Touch Dynamic Quest Series Manuale utente

Manuali Tavoletta popolari di altre marche

Laser

Laser MID-1060 Guida utente

MUNBYN

MUNBYN IRT09J Guida rapida

Motorola

Motorola MC3090R - Win CE 5.0 Professional 520 MHz Manuale utente

Dell

Dell Latitude ST Manuale del proprietario

Lenovo

Lenovo IdeaTab S6000L Manuale del proprietario

Venturer

Venturer WT9L11 Manuale utente

EDUGEAR

EDUGEAR UnoBook Manuale utente

Philips

Philips PI3210G/58 Manuale utente

ADLINK Technology

ADLINK Technology IMT-BT Manuale utente

TwinMOS

TwinMOS TwinTAB-T102D1 Manuale utente

Archos

Archos 9.7 xenon Manuale utente

Getac

Getac E100 Manuale utente

HANNspree

HANNspree HANNspad SN70T3 Manuale utente

Philips

Philips PI3105W2/55 Manuale utente

LG LG-V935 Manuale utente

Zeki

Zeki TBDB763B Manuale utente

Ricoh

Ricoh eQuill Manuale utente

DT Research

DT Research DT365CT Istruzioni per il montaggio