VTouch 5-Wires Resistive Touchscreen User Manual
8
5mA ~ 25mA
•Part 6. Cosmetic Quality
1. Inspection Condition
A. The lightness of place: 500 LUX
B. The distance of eyeshot: 30 CM. The panel must be checked under the light
transparency condition.
C. The angle of eyeshot: >60˚C
D. The light source: natural sunlight
2. Criterion
The followings are applied to viewing area. Except dot space.
Φ≤0.15mm Ignorance
0.15mm ≤φ≤0.25mm ≤2
1. Spot otherness
φ>0.25mm NG
w≤0.05mm and L ≤2.0mm Ignorance
w≤0.05mm 2.0mm< L ≤4.0mm 2 or less& distance >5mm
2. Scratch
w>0.05mm or L>4.0mm NG
W ≤0.03mm Ignorance
L≤4mm& 0.03mm ≤W ≤0.05mm ≤2 2 line distance ≤10mm
3. Cicatrices(line)
L: Length W: Width
W>0.05mm NG
Edge warp ≤3mm allowable4.Edge warp Edge warp ≤2mm allowable
•Part 7. Caution
In order to prevent accidental use and to guarantee the performance of product,
customers are requested to keep the following.
1. Storage
A. Store the products at the temperature and humidity range presented in the
specification.
B. Store the products in the state of package.
C. Do not expose the product to a direct ray of the sun.
2. Unpacking
A. Do not hold tail to take out touch panels in the package.
3. Handling
A. Use gloves and finger coat to prevent stains on the touch screen and injury by the
sharp Edge of the touch screen.
B. Do not take hold of tail when handing the touchscreen.
C. Do not pile up touchpanels.
D. Do not put anything on the touchscreen.
E. Do not fold the tail.
