Touch T714C Manuale utente
QUICK SET-UP GUIDE
PLUMBED READY T714C
REAR VIEW
A. SET-UP
Remove adhesive tapes.
Unwrap the Power Cord.
1View the rear of the product
for connecting water supply line.
2 Insert a 1/4" diameter water
supply line into the adapter on
the rear of the Water Tank.
3 If the water supply line is
not 1/4" diameter, an adapter
may be needed.
4
NOTE:
Please consult a professional
plumber if necessary.
NOTE:
The first brewing cycle may take
up to 30 seconds to start.
WARNING:
DO NOT pull the Latch
while brewing.
Plug the Power Cord into
an electrical outlet.
Press the Power Button.
5 Place a large mug or cup
on the Drip Tray. (min. 12oz)
6 Press on the 10 oz Cup Size
Button to start brewing.
7 Discard the hot water and
repeat steps 6 and 7 at least
two (2) more times.
8
11
WARNING:
Coffee Pod may be HOT.
WARNING:
Sharp Needles on the Top Cover
and in the Red Cup Holder.
B. BREW
Place a mug on the Drip
Tray and lift the Cover by
pulling on the Latch.
9 Insert a coffee pod into
the Red Cup Holder.
Close the Cover.
10 Press the desired Cup Size Button to start brewing.
Enjoy your beverage!
The default taste setting is BOLD, but this can be
changed by pressing either MILD or MED.
Altri manuali per T714C
1
Indice
Altri manuali Touch Macchina per il caffè
