TP-Link CPE610 Manuale utente

CPE610

Outdoor CPE

Installation Guide

Contents

Overview

Package Contents

Hardware Overview

Hardware Connection

Site Consideration

Hardware Installation

Power Supply

Lightning & ESD Protection

Software Configuration

Logging in to the PharOS

Configuration for a Typical Application

Antenna Alignment

Specifications

FAQ

TP-Link's Pharos series outdoor CPEs are dedicated to outdoor

wireless network solutions. This guide is applicable to the product

CPE610.

Overview

Package Contents

Power Cord Passive PoE Adapter

Installation Guide

CPE610

Installation Guide

Outdoor CPE

Pharos CPE Center Reflector Panel Side Reflector Panels

(Qty.2)

Bolts with Nut and Lock

Washer Assemblies

(M6×110, Qty.2)

Bolts with Nut and Lock

Washer Assemblies

(M6×70)

Rear Cover Mounting Bracket

(For CPE)

Pole-mount Clamp

ST3×10 Self-tapping Screws

(Qty.2)

D3×28 Plastic Wall Anchors

(Qty.2)

Mounting Bracket

(For PoE Adapter)

Protective Cap

Bottom View

Hardware Overview

Reflector Assembly

Securing Arms

Bubble Level

Mounting Bracket

Pole-mount Clamp

Rear Cover

On: A device is connected to this port, but there

is no activity.

Flashing: A device is connected to this port, and

is active.

On: The CPE is powered on.

Panel Layout

On: The wireless function is enabled.

Passive PoE Adapter

Power LED

On: Power on.

Off: Power off.

Remote Reset

Press and hold for 5 seconds to reset the CPE

to its factory defaults.

RESET

Press and hold for 5 seconds to reset the CPE to

its factory defaults.

ETHERNET

The port is to connect to the POE port of the

provided PoE adapter for both data transmission

and power supply through Ethernet cabling.

Hardware Connection

Site Consideration

Ensure a clear line of sight between the wireless devices for

optimum performance. An elevated location is recommended as

obstacles like trees, buildings and large steel structures will

weaken the wireless signal. See 'Q2' in 'FAQ' for details about

how to calculate the minimum mounting height of the devices.

Mounting Height

Line of Sight

Side View

Orientation

Install the CPE devices so that they point towards the devices

that will receive the signal. You can orient the devices with the

help of Google Maps, GPS and some landmarks. The horizontal

bandwidth of CPE610 is 6.8°.

shenzhen

Line of Sight

Horizontal

Beamwidth

1. Attach the Side Reflector Panels to the Center Reflector Panel

as follows:

a. Insert the two mounting studs on the Center Reflector

Panel into the large opening of the slots on the Side

Reflector Panel.

b. Slide the Side Reflector Panel until the mounting studs are

positioned over the narrow opening of the slots, and the top

edges of the panels should be aligned when done.

Hardware Installation

c. Repeat step a and step b to attach the other Side Reflector

Panel.

d. (Optional) Attach the Side Reflector Panels to the Center

Reflector Panel more securely using four M2.5x8 bolts and

nuts (not provided). This is recommended if the CPE device

is exposed to extreme weather, such as strong winds.

2. Attach the Rear Cover to the reflector assembly as follows:

a. While holding the reflector assembly, align the raised edges

on the back with the Securing Arms of the Rear Cover, and

align the Snap Hooks on the Rear Cover with the slots on

the Center Reflector Panel.

b. Attach the Rear Cover to the reflector assembly. Press upon

the Rear Cover at the four positions marked in the diagram

below in sequence until it locks into place.

WARNING: To avoid damage, do not place the panels on a flat

surface or push down on it.

Altri manuali per CPE610

Indice

Altri manuali TP-Link Antenna

TP-Link

TP-Link TL-ANT2406A Manuale utente

TP-Link

TP-Link TL-ANT2408C Manuale utente

TP-Link

TP-Link TL-ANT2403N Manuale utente

TP-Link

TP-Link TL-ANT2405C Manuale utente

TP-Link

TP-Link TL-ANT5823B Manuale utente

TP-Link

TP-Link TL-ANT5830B Manuale utente

TP-Link

TP-Link TL-ANT2410MO Manuale utente

TP-Link

TP-Link TL-ANT2414B Manuale utente

TP-Link

TP-Link TL-ANT2414A Manuale utente

TP-Link

TP-Link TL-ANT2424B Manuale utente

TP-Link

TP-Link TL-ANT2405CL Manuale utente

TP-Link

TP-Link TL-ANT2408CL - 8dBi Antenna -2.4GHz Manuale utente

TP-Link

TP-Link TL-ANT2415D Scheda tecnica

TP-Link

TP-Link TL-ANT2415D Manuale utente

TP-Link

TP-Link TL-ANT2414A Manuale utente

TP-Link

TP-Link Pharos CPE210 Manuale utente

TP-Link

TP-Link TL-ANT2409B Manuale utente

TP-Link

TP-Link TL-ANT2409A Manuale utente

TP-Link

TP-Link deco AC1300 Manuale utente

TP-Link

TP-Link TL-ANT2424MD Manuale utente

Manuali Antenna popolari di altre marche

Alfa Network

Alfa Network APA-L01 Manuale utente

Naval

Naval PR-422CA Manuale utente

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Manuale utente

TERK Technologies

TERK Technologies TV44 Manuale utente

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Manuale utente

HP J8999A Manuale utente

MobilSat

MobilSat MSP-S Manuale utente

Steren

Steren ANT-UHF 13 Manuale utente

Novatel

Novatel 600-G Manuale operativo

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Manuale utente

TRENDnet

TRENDnet TEW-AO12O Manuale utente

Radio Shack

Radio Shack 15-1837 Manuale utente

CommScope

CommScope CMAX-OMFX-43M-I53 Manuale utente

Ramsey Electronics

Ramsey Electronics DAP25 Manuale utente

COBHAM

COBHAM SAILOR 800 VSAT Manuale per l'uso e la cura

Trango Systems

Trango Systems AD900-9 Manuale utente

Steren

Steren ANT-100 Manuale utente

Proxim

Proxim 5054-PA-23 Manuale utente