TP-Link VIGI Manuale utente

Installation Guide

Network Video Recorder

Contents

Chapter 1 Appearance——————————— 1

1.1 Front Panel..............................................................1

1.2 Rear Panel ...............................................................1

Chapter 2 Installation ——————————— 3

2.1 Package Contents ...............................................3

2.2 Safety Precautions ..............................................3

2.3 Installation Tools...................................................6

2.4 Hard Drive Installation ........................................6

2.5 Product Installation .............................................9

Chapter 3 Hardware Connection —————— 11

Chapter 4 Conguration —————————— 12

Appendix FAQ——————————————— 15

Chapter 1 Appearance

1.1 Front Panel

The figure is for demonstration purposes only. Your device may differ in

appearance from the depicted.

32 Channel Network Video Recorder

VIGI NVR4032H

LED Indication

LAN

On: Network is working properly.

Flashing: Data is being transmitted or received.

Off: Network is malfunctioning.

HDD On: The HDD is normal.

Off: No HDD or the HDD is malfunctioning.

POWER On: System is running normally.

Off: System is running abnormally.

USB Port

2 USB ports for additional devices such as USB mouse, USB storage

device, and USB keyboard.

1.2 Rear Panel

The figure is for demonstration purposes only. Your device may differ in

appearance from the depicted.

Power Socket

Alarm In/Out Audio In/Out

LAN Ports VGA

RS-232

HDMI

USB 3.0

Kensington

Security Slot

Grounding

Terminal

Power Socket

Connect the female connector of the power cord here, and the male

connector to the AC power outlet. Make sure that the voltage of the

power supply meets the requirement of the input voltage (100–240 V~

50/60 Hz).

Alarm Input/Output

Connect to alarm input/output devices using the provided terminal blocks.

Audio Input/Output

Connector for audio input and output.

LAN Ports

Connect to an Ethernet device (eg. router and switch).

VGA

Output port for analog video signals. Connect your monitor to this port if

it uses VGA connection.

HDMI

Output port for high-definition audio and video signals. Connect your

monitor to this port if it uses HDMI connection.

USB 3.0

Connect to additional devices such as USB mouse, USB storage device,

and USB keyboard.

Kensington Security Slot

Secure the lock (not provided) into the security slot to prevent the device

from being stolen.

Grounding Terminal

The NVR already comes with lightning protection mechanism. You can

also ground the NVR through the PE (Protecting Earth) cable of AC cord

or with Ground Cable. For detailed lightning protection measures, go

to https://www.tp-link.com/support, search the model number of your

NVR and go to the product Support web page, refer to the Lightning

Protection Guide from the Related Documents:

https://www.tp-link.com/us/conguration-guides/lightning_protection_

guide/.

Caution:

Please use the provided power cord.

Chapter 2 Installation

2.1 Package Contents

Make sure that the package contains the following items. Please

contact your distributor, if any of the listed items is damaged or missing.

The figures are for demonstration only. The actual items may differ in

appearance and quantity from the depicted.

NVR

32 Channel Network Video Recorder

VIGINVR4032H

Installation Guide

Mounting Brackets, Screws

and Rubber Feet

Power Cord, HDD Power

Cables, HDD Data Cables,

Terminal Blocks

Mouse

2.2 Safety Precautions

To avoid any device damage and bodily injury caused by improper use,

you should observe the following rules.

■Safety Precautions

■Keep the power off during the installation.

■Wear an ESD-preventive wrist strap, and make sure that the wrist strap

has a good skin contact and is well grounded.

■Use only the power cord provided with the device.

■Make sure that the supply voltage matches the specifications indicated

on the rear panel of the device.

■Ensure that the device is installed in a well-ventilated environment and

its ventilation hole is not blocked.

■Do not open or remove the cover of the device.

■Before cleaning the device, cut off the power supply. Do not clean it by

the waterish cloth, and never use any other liquid cleaning method.

■Place the device with its bottom surface downward.

■Site Requirements

Temperature/Humidity

32 Channel Network Video Recorder

VIGINVR4032H

Keep the equipment room at an appropriate level of temperature and

humidity. Too much or too little humidity may lead to bad insulation,

leakage of electricity, mechanical property changes, and corrosion.

High temperatures may accelerate aging of the insulation materials,

significantly shortening the service life of the device.

Clearness

32 Channel Network Video Recorder

VIGINVR4032H

The dust accumulated on the device can be absorbed by static electricity

and result in poor contact of metal contact points. Some measures have

been taken for the device to prevent static electricity, but too strong

static electricity can cause deadly damage to the electronic elements on

the internal circuit board. To avoid the effect of static electricity on the

operation of the device, attach much importance to the following items:

■Dust the device regularly, and keep the indoor air clean.

■Keep the device well grounded and ensure that the static electricity has

been transferred.

Electromagnetic Interference

32 Channel Network Video Recorder

VIGINVR4032H

Electronic elements including capacitance and inductance on the device

can be affected by external interferences, such as conducted emission

by capacitance coupling, inductance coupling, and impedance coupling.

To decrease the interferences, make sure to take the following measures:

■Use the power supply that can effectively filter interference from the

power grid.

■Keep the device far from high-frequency and strong-current devices

such as radio transmitting station.

■Use electromagnetic shielding when necessary.

Lightning Protection

32 Channel Network Video Recorder

VIGI NVR4032H

Extremely high voltage currents can be produced instantly when

lightning occurs and the air in the electric discharge path can be instantly

heated up to 20,000 °C. As this instant current is strong enough to

damage electronic devices, more effective lightning protection measures

should be taken.

■Ensure that the rack and the device are well earthed.

■Make sure the power socket has a good contact with the ground.

■Keep a reasonable cabling system and avoid induced lightning.

■Use the signal SPD (Surge Protective Device) when wiring outdoor.

Note:

For detailed lightning protection measures, go to https://www.tp-link.com/

support, search the model number of your product and go to the product Support

web page, refer to the Lightning Protection Guide from the Related Documents:

https://www.tp-link.com/us/conguration-guides/lightning_protection_guide/.

Installation Site

32 Channel Network Video Recorder

VIGINVR4032H

When installing the device on a rack or a flat workbench, attach much

importance to the following items:

■The rack or workbench is flat, stable, and sturdy enough to support the

weight of 5.5 kg at least.

■The rack or workbench has a good ventilation system. The equipment

room is well ventilated.

■The rack is well grounded. Keep the device less than 1.5 meters away

from the power socket.

2.3 Installation Tools

■Phillips screwdriver

■ESD-preventive wrist wrap

■Cables

Note:

These tools are not included with our product. If needed, you can purchase them

separately.

2.4 Hard Drive Installation

When installing for the first time, please prepare a 3.5-inch hard disk

drive (HDD). It is recommended to use the HDD of surveillance or enter-

prise level. Before installation, please disconnect the power from the

network video recorder (NVR).

1. Remove the fixing screws on the side and back panels to open the

cover of the NVR.

2. Remove the fixing screws to detach the HDD bracket.

3. Match the screws on the HDD with the holes on the NVR. Up to 4 HDDs

can be mounted at a time.

4. Install the HDD bracket back to the NVR.

5. Connect the power cables and data cables.

6. Replace the cover and fasten the screws of the NVR.

Altri manuali per VIGI

Indice

Altri manuali TP-Link Hardware di rete

TP-Link

TP-Link TL-SF1005D Manuale utente

TP-Link

TP-Link VIGI NVR1008 Manuale utente

TP-Link

TP-Link CPE Series Manuale utente

TP-Link

TP-Link Archer C59 Manuale utente

TP-Link

TP-Link tapo P306 Manuale utente

TP-Link

TP-Link TL-SM321A Manuale utente

TP-Link

TP-Link VIGI NVR2016H Manuale utente

TP-Link

TP-Link deco X20V2 Manuale utente

TP-Link

TP-Link TL-POE170S Manuale utente

TP-Link

TP-Link VIGI NVR11104H-4P Manuale utente

TP-Link

TP-Link VIGI NVR1104H-4P Manuale utente

TP-Link

TP-Link TL-WPA4226KIT Manuale utente

TP-Link

TP-Link TL-SM301U Manuale utente

TP-Link

TP-Link KL50B Manuale utente

TP-Link

TP-Link Kasa Smart KP200 Manuale utente

TP-Link

TP-Link deco X60V2 Manuale utente

TP-Link

TP-Link VIGI NVR1008 Manuale utente

TP-Link

TP-Link VIGI NVR1008H Manuale utente

TP-Link

TP-Link Pharos CPE210 Manuale utente

TP-Link

TP-Link TL-EP110 Manuale utente

TP-Link

TP-Link TL-PA4020P Manuale utente

TP-Link

TP-Link JetStream TX432 Manuale utente

TP-Link

TP-Link TL-WPA4220 TKIT Manuale utente

TP-Link

TP-Link SafeStream TL-ER6120 Manuale

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente