TP-Link TD-W8968 Manuale utente
TP-Link TD-W8968
Quick Install Guide
Sharedband Router Setup Steps
1) Remove the Sharedband routers from their packaging and place them in a suitable
locaon
2) Use the included short Ethernet cable(s) to connect the routers’ yellow ’LAN’ ports in
either of these two conguraons:
a) The recommended setup is to connect the Sharedband routers together via an
un-managed switch
b) However you can connect the Sharedband routers together with an Ethernet cable (daisy
chained)
3) Use the included ADSL cable to connect each routers’ grey ‘ADSL’ port to an included ADSL
micro-lter
4) Use the included power adapters to connect each router’s ’Power’ socket to a mains
power outlet
5) Ensure that the ‘On/O’ buon is depressed on all routers
6) Use an Ethernet cable to connect a computer to an unused yellow ‘LAN’ port of any router
TP-Link TD-W8968 QIG 2www.sharedband.com
7) Each router is idened using a node idener. This is a unique single digit number clearly
marked on the underside of the router. Open a web browser and visit hp://192.168.3.1 to
connect to node 1
8) When prompted for sign in credenals , please input the following:
Username: admin Password: Bonding123 (we recommend you change this password)
9 In the menu posioned at the le of the displayed web page, select ‘Quick Setup’
10) In the ’Country’ drop down, select your country
11) In the ‘ISP’ drop down, select the Internet Service Provider associated with the line that
you are connecng this node to
12) In the ‘PPP Username’ eld and ‘PPP Password’ eld, input the corresponding ADSL logon
credenals provided by your ISP. You should have received these credenals directly from
your ISP when they processed your internet access subscripon. If you’re unable to locate
them, please request them from your ISP
13) Click the ‘Next’ buon
14) Click the ‘Conrm’ buon and then wait for 30 seconds to elapse
15) Aer 30 seconds has elapsed, click ‘Management’
16) Click the reboot buon towards the middle of the screen
17) Repeat above steps 7-16 for each of the remaining nodes. Each node has a dierent IP
address which corresponds with the number marked on the underside of the router. For
example router two can be accessed by vising hp://192.168.3.2, router 3 (if applicable)
can be accessed by vising hp://192.168.3.3, etc…
www.sharedband.com 3TP-Link TD-W8968 QIG
TP-Link TD-W8968 QIG 4www.sharedband.com
Verify Successful Setup
a) Use an Ethernet cable to connect a computer to any unused yellow ‘LAN’ port of the
router you would like to verify has been successfully setup
b) Please note the node idener which is a unique single digit number clearly marked on
the underside of the router
c) Open a web browser and visit the IP address of the connected router. These are
hp://192.168.3.1 if connecng to node idener 1, hp://192.168.3.2 if connecng to
node idener 2 etc…
d) When prompted for sign in credenals , please input the following:
Username: admin Password: Bonding123 (we recommend that you change this password)
e) In the menu posioned at the le of the displayed web page, select ‘Status’
f) If this router has been successfully setup, items within the ‘Service Status’ panel will be
displayed green in colour and report as follows:
For informaon, the above listed items make the following checks:
Modem Connecon Status - connecon through your ISP
Aggregaon Server Status - connecon to our data centre
Roung Mode - method by which router is able to communicate:
WAN and Community: This router is connected to the aggregaon server directly and
at least 1 other Sharedband router in its community
WAN Only: This router is not connected to other routers in its community (see step 2)
Community Only: This router is not connected to the aggregaon server (see page 4)
No network available: This router is not connected to the Sharedband aggregaon
server and other routers in its community
g) Repeat above steps a-f for all of the remaining routers in the community
More Informaon
Both our helpful knowledgebase and support ckeng system are accessible online at:
hp://support.sharedband.com
Altri manuali per TD-W8968
8
Indice
Altri manuali TP-Link Router di rete
TP-Link
TP-Link Deco WE10800 Manuale utente
TP-Link
TP-Link EC120-F5 Manuale utente
TP-Link
TP-Link TL-WDR3600 Manuale utente
TP-Link
TP-Link Archer C58 Manuale utente
TP-Link
TP-Link Omada ER605 Manuale utente
TP-Link
TP-Link TL-WR1043ND Manuale utente
TP-Link
TP-Link Archer XR500v Manuale utente
TP-Link
TP-Link MR0-W8901G Manuale utente
TP-Link
TP-Link SafeStream TL-R480T+ Manuale utente
TP-Link
TP-Link TL-MR3040 Manuale utente
TP-Link
TP-Link TD-8816 Manuale utente
TP-Link
TP-Link PSM150-DC Manuale utente
TP-Link
TP-Link TL-R860 Manuale utente
TP-Link
TP-Link MR-3020 Manuale utente
TP-Link
TP-Link TL-WR802N Manuale utente
TP-Link
TP-Link ARCHER C60 Manuale utente
TP-Link
TP-Link TD-8840 Manuale utente
TP-Link
TP-Link AC1750 Manuale utente
TP-Link
TP-Link JetStream TL-SL3428 Manuale utente
TP-Link
TP-Link SafeStream TL-R480T+ Manuale utente
