TP-Link Tapo T300 Manuale utente
User Guide
Tapo Smart Water Leak Sensor
© 2023 TP-Link 1910013487 REV1.0.0
Contents
About This Guide ···················································· 1
Introduction ······························································· 2
Appearance ······························································· 3
Tapo Smart Ecosystem······································· 4
Set Up Your Smart Sensor································· 5
Use Your Smart Sensor······································· 7
How to Reset Your Smart Sensor ·················· 9
How to Replace Battery·····································10
Authentication························································11
1
About This Guide
This guide provides a brief introduction to the Smart Water Leak Sensor and the Tapo app, as well as regulatory information.
Please note that features available in Tapo may vary by model and software version. Tapo availability may also vary by region. All images, steps, and
descriptions in this guide are only examples and may not reect your actual Tapo experience.
Conventions
In this guide, the following convention is used:
Convention Description
Blue Key information appears in blue, including management page text such as menus, items, buttons and so on.
Underline Hyperlinks are in blue and underlined. You can click to redirect to a website.
Note: Ignoring this type of note might result in a malfunction or damage to the device.
More Info
• Specications can be found on the product page at https://www.tapo.com.
• Our Technical Support and troubleshooting information can be found at https://www.tapo.com/support/.
• The setup videos can be found at https://www.tp-link.com/support/setup-video/#smart-sensors.
2
Introduction
The Tapo Smart Water Leak Sensor noties you via dierent methods in case of an emergency. Get alerted immediately when a water leak occurs, so
you can respond quickly to prevent further damage.
• Drip & Leak Alert - Features 6 highly sensitive sensor probes to quickly and consistently respond to drips and leaks for faster protection of your
property.
• Built-in 90 dB Alarm - Alerts you immediately with its adjustable 90 dB alarm when leakage occurs. Press once to silence the alarm after you nd
the spot.
• Instant App Notications - Receive an instant app notication when a leak happens. Find out even while away from home to prevent worse water
damage.
• Tapo Hub Alarm - Set a Smart Action and tigger the Hub alarm for additional audible alert coverage in your home when water leakage is
detected.
• Visible Alarm with Smart Lights - Set up Smart Actions in the Tapo app to get a visual alert from your Tapo smart light bulb before disaster
strikes. (Tapo smart lights sold separately)
• IP67 Rating - Provides high-grade water resistance and dust protection and a long service life. Ideal for humid and dusty environments.
• Flexible Placement - No wiring requrired and simple to use. Place the sensor anywhere leaks or oodling may occur, like near a washing
machine, water heater, sink/bathtub, and more.
• 3 Year+ Battery - Uses two replaceable AAA/LR03 batteries (pre-installated out of box) and provides you with up to three years of protection.
Receive in-app reminders when the batteries are low.
*Battery life of up to 3 years is based on TP-Link's laboratory results when in standby mode. Actual battery life may vary depending on working conditions and environments.
3
Appearance
Sensor Probes
1Control Button
Single press
Silence alarm;
Test connection with the hub.
Double press
Adjust alarm volume. The
volume level cycles through
High, Normal, Low, and Mute.
Press and hold for 5s
Pair with hub.
4
3
2
1Control Button
LED
Sensor Probe
Buzzer
2LED Indicator
Blinking
Blinks
once
Blinks
twice
Blinks
3 times
Blinks
4 times
Enter pairing mode
Adjusted alarm volume
level to Mute
Adjusted alarm volume
level to Low
Adjusted alarm volume
level to Normal
Adjusted alarm volume
level to High
5
3Sensor Probe
Battery Compartment
3
Sensor Probe
2 AAA/LR03 batteries pre-installed.
4
Tapo Smart Ecosystem
Tapo is the easy way to turn your home into a smart home. With the Tapo Hub as a bridge, Tapo Smart Sensor works with a wide range of Tapo
accessories. So you can easily control and monitor your home from anywhere.
Smart
Button
Smart
Hub
Motion
Sensor
Window/Door
Sensor
Water Leak
Sensor
Temperature &
Humidity Sensor
Smart
Switch
5
1. Set Up Your Sensor
Tap the button in the Tapo app, tap
Sensors, and select your model.
2. Power Up & Check LED
Remove the battery insulation tab to power up
your sensor. The LED should blink. Follow the
app instructions to complete setup.
Set Up Your Smart Sensor
Watch setup videos at https://www.tp-link.com/support/download/tapo-t300/
Before You Start
A Tapo Hub is required. Make sure your Tapo
Hub’s rmware is updated to the latest version
and successfully set up via the Tapo app.
OR
6
4. Place Your Sensor
Lay the sensor at to monitor water leaks.
3. Test Your Sensor
After setup, single press the control button on
your sensor and check if the hub sounds an
alarm.
7
Home Page Settings
Long press on a card, then you can reorder
cards, tap to remove your device from your
account, share your device, favorite/unfavorite
device, or relocate your device to other Home.
Status Page
You can check the event logs. Slide the panel
up to check more settings or tap the gear icon
to enter the Settings page.
Use Your Smart Sensor
After you successfully set up your hub and sensor, you will see your devices listed on the home page. With the Tapo app, you can view and manage
your devices and get instant notications anytime, anywhere.
Home Page
This page lists all the devices you've added
and you can view them directly and manage
them easily. Tap the card to enter its Status
page.
8
Device Settings
Check/edit the basic info, set notications
schedules, adjust the alarm volume, or remove
your device from your account.
Featured Smart Actions
The sensor can work with other Tapo devices
to automate your home. You can customize
smart actions based on the templates.
Indice
Altri manuali TP-Link Sensore di sicurezza
