TP-Link TD-W8961NB Manuale utente

If you currently use a modem, disconnect it now - the Modem Router will

replace your current modem.

If no telephone is needed, please connect the ADSL port of the Modem

Router to the wall jack using the telephone line directly.

Note

Note Please use only wired network connections to configure the Modem

Router.

Installation

Connect your computer to

the Port labeled “1~4” on

the Modem Router with an

Ethernet cable.

Connect the splitter to the wall

ack using a telephone line,

then use the other telephone

line to directly connect it to the

DSL port on the Modem

Router and the MODEM port

of the splitter, also have the

PHONE port of the splitter

connected to a telephone.

The product model shown in this QIG is TD-W8961ND, as an example.

Note

Power on all your network devices and then check to see if the LEDs of the

Modem Router display normally as the diagram below describes.

If the LEDs display abnormally, please check to see if all the cable

connectors (power adapter, phone line and Ethernet cable) are well

connected to your device. With the phone line well connected, if the

ADSL LED turns off after flashing, please contact your ISP to ensure that

your Internet connection is active.

Note

ADSL: Solid light or flashing

Plug the provided Power

dapter into the Power jack

on the back of the Modem

Router and the other end to

a standard electrical wall

socket.

POWER: Solid light

WLAN: Solid light or flashing

LAN: Solid light if the corresponding port is connected

Insert the provided Resource

CD into your CD-ROM drive.

The Setup Wizard will

automatically pop up on

your computer’s screen.

To configure the device, you can either run the setup CD (method one), or run

the Web-based Quick Setup Wizard (method two). TP-LINK strongly

recommends that you run the setup CD.

Note

Please select your product

model and click Start Setu

The configuration has now been completed. Please skip to Step 3 “Testing the

Internet Connection”.

The basic settings for your Modem Router are completed. Please open the web

browser and try to log on to some popular website to test your Internet

connection, for example:

http://www.tp-link.com

http://www.google.com

If the above websites can be accessed, it indicates that your Modem Router has

been configured successfully and you can start to enjoy the Internet. If the

websites cannot be accessed, please refer to “T4. What can I do if I cannot

access the Internet?” in the Troubleshooting guide.

Then a flash video will pop up and

show you how to connect you

devices. After that, the Easy Setup

Assistant will start.

Click NEXT, and then follow

the step-by-step instructions

until you complete the

configuration

For the advanced configurations, please refer to the User Guide on the

CD provided.

Note

Note The above configurations only need to be set once. If you want other

computers in your LAN to access the Internet, please connect the desired

computer to the ADSL Modem Router directly. If the additional computer

can not access the Internet, please set that computer referring to “T3.

What can I do if I cannot access the web-based configuration page?”

in the Troubleshooting guide.

Note

T1. How do I restore my Modem Router’s configuration to its factory default

settings?

T2. What can I do if I don’t know or forget my password?

1) Restore the Modem Router’s configuration to its factory default settings. If

you don’t know how to do that, please refer to section T1.

2) Use the default user name and password: admin, admin.

3) Try to configure your Modem Router once again by following the instructions

in the previous steps of the QIG.

T3. What can I do if I cannot access the web-based configuration page?

1) Configure your computer’s IP Address.

For Windows 7 OS

Once the Modem Router is reset, the current configuration settings will be

lost and you will need to re-configure the Modem Router.

With the Modem Router powered

on, press and hold the RESET

button on the rear panel for 8 to 10

seconds before releasing it.

Press it for 8 to 10 seconds

Go to Start > Settings > Control

Panel, and then you will see the

following page.

Click View network

status and tasks

Troubleshooting

Right-click Local Area

Connection

Click Properties

Click Change adapter settings

Double-click Internet Protocol

ersion 4 (TCP/IPv4)

For Windows Vista OS

Go to Start > Settings

>Control Panel, and then

you will see the following

page.

Click View status

Click View network

status and tasks

Select Obtain an IP

address automatically

Select Obtain DNS server

address automatically

Click OK

Click Properties

Double-click Internet Protocol

ersion 4 (TCP/IPv4)

For Windows XP OS

Select Obtain an IP address

automatically

Select Obtain DNS server

address automatically

Click OK

Go to Start > Control Panel, you

will then see the following page.

Click Network and Internet

Connections

Click Network Connections

Right-click Local Area

Connection

Click Properties

Double-click Internet

Protocol (TCP/IP)

Altri manuali per TD-W8961NB

Indice

Altri manuali TP-Link Router wireless

TP-Link

TP-Link td-w8970 Manuale utente

TP-Link

TP-Link TL-MR3220 Manuale utente

TP-Link

TP-Link Archer D20 Manuale utente

TP-Link

TP-Link TL-WR1042ND Istruzioni operative originali

TP-Link

TP-Link TL-WR1043N Manuale utente

TP-Link

TP-Link TL-WPA4220 TKIT Manuale utente

TP-Link

TP-Link TL-WR841HP Manuale utente

TP-Link

TP-Link TL-WR941ND - Wireless Router Manuale utente

TP-Link

TP-Link Archer D50 Manuale utente

TP-Link

TP-Link TL-WPA4530 Manuale utente

TP-Link

TP-Link TD-W8901G - VERSION 1.0.4 Manuale utente

TP-Link

TP-Link td-w8970 Manuale utente

TP-Link

TP-Link Archer T2UH Manuale utente

TP-Link

TP-Link TL-WR840N Manuale utente

TP-Link

TP-Link TL-WR844N Manuale utente

TP-Link

TP-Link TL-WR820N Manuale utente

TP-Link

TP-Link TD-W8961N Manuale utente

TP-Link

TP-Link deco W7200 Manuale utente

TP-Link

TP-Link AX1800 Manuale utente

TP-Link

TP-Link ARCHER C1200 Manuale utente

TP-Link

TP-Link TL-WR842ND Istruzioni per l'installazione e il funzionamento

TP-Link

TP-Link Archer C7 Manuale utente

TP-Link

TP-Link Archer GE800 Manuale utente

TP-Link

TP-Link AC2600 MU-MIMO Manuale utente

Manuali Router wireless popolari di altre marche

Milesight

Milesight UG67 Manuale utente

Airlogic

Airlogic AirSync Class 1 Manuale del proprietario

Samsung

Samsung WCH730B Manuale utente

TELEFONICA

TELEFONICA USB Adapter Manuale utente

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manuale utente

Askey

Askey RAC2V1K Manuale utente

Alloy

Alloy WLF2454AP-S Manuale utente

NETGEAR

NETGEAR WNR2000v4 Manuale utente

Hama

Hama 53120 Manuale utente

Intellinet

Intellinet 524582 Manuale utente

Asus

Asus RT-N10P Manuale utente

D-Link

D-Link DIR-506L Manuale utente

Sapido

Sapido GR297n Manuale utente

Asus

Asus DSL-N55U Manuale utente

AMTC

AMTC WR7502 Manuale utente

Compaq

Compaq CP-2W - iPAQ Connection Point Manuale utente

SMC Networks

SMC Networks WBR14-N2 FICHE Manuale utente

Draytek

Draytek Vigor2120 Series Manuale utente