TracStar MVS1200P4 Manuale utente
1200P4-Assy-3-07 Page 1
Copyright 2006 All Rights Reserved
Transportable VSAT System
Assembly Instructions
1984 West New Hampshire Street
Orlando, FL 32804
407.650.9054
1200P4-Assy-3-07
Copyright 2006 All Rights Reserved
1200P4-Assy-3-07 Page 2
Copyright 2006 All Rights Reserved
Contents
Page
Removal from Case.........................................3
Reflector Assembly.......................................... 4
Boom Assembly............................................... 6
Feed Attachment.............................................. 7
Pedestal Startup..............................................11
Mounting the Reflector...................................13
Mount the Wedge Plate .................................14
Final Deployment...........................................16
Stowing ..........................................................17
Dismantling the Reflector............................... 17
Dismantle the Feed/Boom .............................18
Stowing the Reflector.....................................21
Wedge Plate Removal ................................... 22
Stowing the Pedestal .....................................22
Pedestal Case Content Packaging................28
1200P4-Assy-3-07 Page 3
Copyright 2006 All Rights Reserved
MVS1200P4
The case on the left is the pedestal—
note the small side is at the bottom which
is the heavier side. The case on the right
contains the reflector, boom, feed as-
sembly, support struts and cables.
MVS1200P4—Reflector Case
Open the latches on the reflector case.
Remove the lid and place on the ground.
MVS1200P4-Reflector Case
Note placement of equipment / items.
ASSEMBLY
1
2
3
1200P4-Assy-3-07 Page 4
Copyright 2006 All Rights Reserved
MVS1200P4-Pedestal Case Bottom
CAUTION—FRAGILE
Remove the straps securing the Reflector
Bags, and carefully set aside.
MVS1200P4-Reflector Numbers
CAUTION—FRAGILE
Note the numbers on edges of the reflector.
Align the pieces as you place them on the
ground.
MVS1200P4-Reflector Bags
CAUTION—FRAGILE
Carefully Remove the reflector panels from
the bags. Shown at the left is the TOP sec-
tion, the boom attaches to the bracket that is
shown on the reflector.
4
5
6
1200P4-Assy-3-07 Page 5
Copyright 2006 All Rights Reserved
MVS1200P4-Reflector Numbers
CAUTION—FRAGILE
Align the pieces as you place them on
the ground.
MVS1200P4-Reflector Numbers
CAUTION—FRAGILE
Align the snap buckles and secure the
four sections together.
MVS1200P4—Boom Struts
Remove the two boom struts from the
bottom of the reflector case.
7
8
9
1200P4-Assy-3-07 Page 6
Copyright 2006 All Rights Reserved
MVS1200P4—Reflector Assembly
Insert the boom into the boom bracket
and secure with the boom clip.
MVS1200P4—Reflector
Assembly
Pull the spring loaded locking sleeve
back and insert the strut onto the ball
located on the side of the reflector.
Secure both struts in this manner.
MVS1200P4—Reflector Assembly
Pull the spring loaded locking sleeve
back and insert the strut onto the ball
located on the side of the feed horn
plate.
10
11
12
1200P4-Assy-3-07 Page 7
Copyright 2006 All Rights Reserved
MVS1200P4—Reflector As-
sembly
Pull the spring loaded locking
sleeve back and insert the strut
onto the ball located on the side
of the reflector.
Secure both struts in this man-
ner.
13
MVS1200P4—Reflector Case
Carefully, remove the BUC and Feed Horn
assembly from the Reflector Case.
Remove the protective cover from the
Feed Horn.
14
MVS1200P4—Reflector Case
Loosen the locking adjustment on the
Feed assembly.
15
NOTE: The FEED assembly is being
shown WITHOUT the flexible
waveguide and LNB to assist in clar-
ity. In ALL cases, the unit will actu-
ally appear as in Step 13.
1200P4-Assy-3-07 Page 8
Copyright 2006 All Rights Reserved
MVS1200P4—Reflector Case
Rotate the assembly 90oso the assembly
is oriented as in the picture.
For the antenna to be able to communi-
cate with the satellite, this rotation step is
mandatory.
15
Operational
Orientation
MVS1200P4—Reflector Case
Tighten the locking adjustment on the
Feed assembly.
16
1200P4-Assy-3-07 Page 9
Copyright 2006 All Rights Reserved
MVS1200P4—Pedestal Case
Secure the BUC to the boom assembly
using the captive mounting pins on the
boom. Secure the front and back pins.
MVS1200P4—Pedestal Case
Secure the feed horn assembly to the front
of the boom using the captive mounting
twist locks on the boom.
18
17
1200P4-Assy-3-07 Page 10
Copyright 2006 All Rights Reserved
MVS1200P4—Pedestal Case
Using the RED color coded cable, secure the
BUC wiring to the side of the BUC.
MVS1200P4—Pedestal Case
Using the BLUE color coded cable, secure the
LNB wiring to the end of the LNB.
MVS1200P4—Reflector & Boom
The Reflector assembly is completed.
You will need two people to assemble
the reflector onto the pedestal.
19
20
21
Altri manuali TracStar Antenna
Manuali Antenna popolari di altre marche
Alfa Network
Alfa Network APA-L01 Manuale utente
Naval
Naval PR-422CA Manuale utente
Feig Electronic
Feig Electronic ID ISC.ANTH200/200 Series Manuale utente
TERK Technologies
TERK Technologies TV44 Manuale utente
Directive Systems & Engineering
Directive Systems & Engineering DSE2324LYRMK Manuale utente
HP
HP J8999A Manuale utente
