If you experience any reception problems like noise or interference in the picture,
changing the channel of your camera can eliminate the problem. The transmitting
channel of the camera is selected by inserting the larger screw into the upper hole
on the back of the camera. Use a coin or large screwdriver to fasten the screw.
Notice! Make sure the screw goes all the way in and tighten securely to lock
the channel.
Notice! If you change the camera’s transmitting channel you must also change the
LCD-monitor’s receiving channel.
To select channel 2
(2432 MHz) place the
screw in the upper
hole, closest to the
antenna.
To select channel 4
(2468 MHz), remove
the screw from the
camera.
Change of frequency
Troubleshooting
The monitor does not have power connected to it (black screen)
•TurnthemonitoronwiththeOn/Off(power)button.
•Startthecartomakesurethecigarettelightersocketissupplyingpower.
•Makesurethecigaretteadapterispushedallthewayinthesocket(thered LED is lit up on the
cigarette adapter).
•Makesuretheotherendofthecigaretteadapterisconnectedtothemonitor’sblackpowercable.
No picture from the camera (blue screen or noise)
If the power is correctly connected, the IR-LEDs around the camera lens will glow with a red light when
the camera is placed in pitch-black surroundings. Cup your hands around the lens and inspect if the
IR-LEDs glow.
•Selectthesamechannelasthecameraistransmittingon(2or4).
•Holdthe“Menu”-buttonpushedinfor3secondstoenterCH-mode.
•Trythesysteminanothercartomakesuretheproblemisnotrelatedtothecaryouarecurrently
using.
Interferences in picture or sound
•Theinterferencesarecausedbywirelessinternet(WLAN).Changethecamerafrequency(seeabove)
or move the trailer to a different location.
Accessories
Battery pack. Contact your retailer for a battery pack that stabilises the picture if you have an uneven
power current in your trailer.
External antenna. Contact your retailer for an external antenna that increases the camera’s wireless
range.
