TrailFX DHS005B Manuale utente

Page 1 of 4

TrailFX Drop Down Step

Part No. DHS005B / DHS006B

Fits: 2019 Chevrolet/GMC - Silverado/Sierra 1500 Crew Cab /

Double Cab

Product image

TO AVOID BEING SCRATCHED, PLEASE PROTECT THE SURFACE OF

THE TAILGATE VENT COVER CAREFULLY.

REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT.

PARTS LIST:

Item Qty Part Description Tools Needed

11Step Bar Driver Side 13 MM SOCKET & WRENCH

21Step Bar Passenger Side 14 MM SOCKET & WRENCH

33Mounting Bracket Driver Side 15 MM SOCKET & WRENCH

43Mounting Bracket Passenger Side RATCHET

512 M8 Bolt TORQUE WRENCH

612 M8 Lock Washer

712 M8 Flat Washer

812 M10 Flange Bolt

912 M10 Flange Nut

ALIGN THE STEP BARS AS DESIRED AND TIGHTEN ALL M10 FASTEN-

ERS TO 30 ft. - lbs., AND THE M8 FASTENERS TO 15 ft.-lbs.

READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.

60 min Drilling Not

Required

Cutting Not Re-

quired

Mounting Kit Images

Item 3 Item 4

Page 2 of 4

4. Grab Driver Side Bar and install to mount brackets with (6) M10 Flange

bolts and (6) Serrated Flange Nuts. Assemble loosely to be able to adjust

step bar as needed. See Figure 2. See Figure 3 for reference.

5. Repeat for passenger side.

6. Align and adjust the step bar as desired. Tighten all hardware and torque

all M8 fasteners to 15 ft.-lbs. and all M10 fasteners to 30 ft.-lbs.

1. Start at the front driver side of vehicle and grab Driver Side Mount Brack-

et. Use (2) M8 hex head bolts, (2) M8 flat washer, and (2) M8 lock wash-

er to mount bracket to rocker panel. Assemble loosely to be able to adjust

step bar as needed. See Figure 1.

2. Repeat for center and rear locations.

3. Repeat for passenger side.

INSTALLATION PROCEDURE

FIGURE 76

FIGURE 2

FIGURE 3 DRIVER SIDE

FRONT

Item 3 Item 3Item 3

Page 3 of 4

COMPLETE INSTALLATION

Page 4 of 4

Keystone Automotive Operations Inc. (KAO) warrants this product to be free of defects in material and workmanship at the time of pur-

chase by the original retail consumer. KAO disclaims any other warranties, express or implied, including the warranty of fitness for a

particular purpose or an intended use. If the product is found to be defective, KAO may replace or repair the product at our option,

when the product is returned prepaid, with proof of purchase. Alteration to, improper installation, or misuse of this product voids the

warranty. KAO’s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for any

incidental or consequential loss or damage.

Check out these other TrailFX Products!!

PRODUCT CARE

FAQ’s

1. Mounting bracket are not getting Installed properly.

In some cases Illustration images shown in Installation manual may not be the exactly same as per actual vehicle images ,also if Driver / Passenger side

mounting brackets are very identical in the design, suggest referring Parts Identification guide to avoid fitment issue.

2. Products are thumping / rattling after installation.

Please ensure that all required mounting brackets / hardware’s are installed & tighten correctly. Suggest using white lithium / regular grease between the

metal to metal contact surfaces.

3. Missing / Excess Hardware.

Recheck hardware count as per the part list.

4. Product not installing properly.

Ensure make model year, cab length and bed size of your vehicle is listed in the application. All installation steps are followed correctly.

Learn more about running boards on our website.

Questo manuale è adatto per i seguenti modelli

Altri manuali TrailFX Accessori per automobili