Trane Comfort Control XB200 Manuale utente
$
FAN MODEFILTER
XB200
Comfort
Control
Table Of
Contents
Page - 2
Pub. No. 22-5204-01
Page
3 Introduction
4-10 Keypad functions
11-14 Features
15 Factory settings
16-17 Comfort Control Setup
18-19 Troubleshooting
20-21 Warranty
$
FAN MODEFILTER
Energy Savings
Page 9.
Up Arrow - Increase
temperature Page 5.
Down Arrow - Decrease
temperature Page 5.
Filter Reminder
Page 7.
Fan ON / OFF
Page 6.
Mode: Heat, Cool
Auto, Off Page 4.
Comfort
Information
Drawer Page 14.
Introduction
Page - 3
Congratulations on the purchase of your new Trane XB200 Comfort Control! Your
XB200 Comfort Control combines the latest digital control technology with intuitive
functions that make this control simple to understand and easy to operate. You’ll enjoy
lower utility bills at the touch of a button with the energy efficiency features built into
your XB200 Comfort Control. Your comfort settings are automatically stored in the
XB200 Comfort Control’s memory eliminating the need for battery backup in the event of
power loss. Simply follow the steps in this instruction manual and begin enjoying the
benefits of your new Trane XB200 Comfort Control.
Pub. No. 22-5204-01
Page - 4
Pub. No. 22-5204-01
Keypad
Functions
Mode
Mode
MODE
- Pressing this key changes the system mode to Heat, Cool, Automatic or Off.
A border will appear around the mode on the display
to show the system mode you’ve selected.
Page - 5
Pub. No. 22-5204-01
UP / DOWN Arrow
- Use these keys to raise or lower the Heat or Cool Setting.
- The first key press turns on the back lighting and a border around the setting to be
adjusted without changing the setting.
- Pressing the Up or Down arrow again will raise or
lower the setting that has the border around it.
- If you press and hold the Up or Down arrow, the temperature setting will advance
rapidly.
- When the control is set to Auto mode, pressing the Mode key once changes the position
of the border to heat or cool.
Page - 6
Pub. No. 22-5204-01
FAN
- Pressing this key selects whether the indoor fan motor runs in automatic or
continuous mode.
The FAN ON indicates that you have selected to
operate the fan in continuous mode.
Pressing the Fan keypad button again returns the
indoor fan mode of operation to automatic and FAN
ON goes away.
Fan
Fan
Keypad
Functions
(cont-)
Page - 7
Pub. No. 22-5204-01
Filter
Filter
FILTER
- Press this key to display how many days remain before time to replace or clean
the filter. The “FILTER” indicator will flash on the display when the filter timers
days remaining reaches zero.
- Press the “FILTER” key after cleaning or replacing
the filter to turn off the filter indicator and reset the
timer.
- IF the filter is serviced before the timer expires, press the “FILTER” key to display the
“days remaining for filter”. Press the Down arrow to change the remaining days to zero.
Press the “FILTER” key twice to reset the timer.
Page - 8
Pub. No. 22-5204-01
Filter
Filter
FILTER
- If you press and hold the filter keypad button for several seconds, the display
changes to the Quick Setup option for the filter timer. Use the UP or DOWN
arrow keypad buttons to change the timer setting if desired, 1 - 180 days.
NOTE: Setting to 0 will disable filter timer.
- Press the filter button again to return to normal
display or just wait a few seconds and the display will
return on its own.
Keypad
Functions
(cont-)
Page - 9
$
Pub. No. 22-5204-01
$
Energy Savings
- Use this key to lower your systems energy consumption and save money at the
same time! Pressing the Energy Savings keypad button changes the indoor tempera-
ture setting to a warmer temperature when the system is operating in the cooling
mode and to a cooler indoor temperature setting when operating in the heating
mode. Energy Savings will appear on the display.
$
Example: Heating offset of 8 degrees.
Page - 10
Pub. No. 22-5204-01
- Press and hold the Energy Savings keypad button to
gain Quick Access to the Energy Savings setup screen.
- Use the UP or DOWN arrow keys to change the
offset degrees setting.
NOTE: Energy Savings offset degrees are selected separately for heating and cooling.
Press the Mode keypad button while viewing this screen to access the Cooling or Heat-
ing offset degrees setting, then use the UP or DOWN arrow key to select the desired
number of offset degrees.
- Press the Energy Savings keypad button again to return to normal display or just wait a
few seconds and the display will return on its own.
$
Keypad
Functions
(cont-)
Indice
Altri manuali Trane Termostato
Trane
Trane BAYSENS924 Istruzioni operative
Trane
Trane XR203 Manuale utente
Trane
Trane 824 Comfort Control Manuale utente
Trane
Trane TAYSTAT 370 Manuale utente
Trane
Trane TZON1050AC52ZAA Manuale utente
Trane
Trane SENS-IN-1D18-HD60D29-4 Istruzioni per il montaggio
Trane
Trane BAC-1000 Manuale utente
Trane
Trane TCONT600AF11MA Manuale utente
Trane
Trane TCONT800 Series Manuale utente
Trane
Trane Z WAVE TZEMT400AB32MAA Manuale utente
Trane
Trane TZEMT500AB32MAA Manuale utente
Trane
Trane Pivot Smart Manuale utente
Trane
Trane BAC-1000 Manuale utente
Trane
Trane TCONT402AN32DA Istruzioni per il montaggio
Trane
Trane 3518-7064 Manuale utente
Trane
Trane Z WAVE TZEMT400AB32MAA Manuale utente
Trane
Trane XT300C Istruzioni per il montaggio
Trane
Trane TCONT600AF11MA Manuale utente
Trane
Trane TCONT 800 Series Manuale utente
Trane
Trane TAYSTAT 375 Manuale utente
