Installing the AA3233 Antenna
Please read all directions before installing the antenna. Make sure that all parts are
present and all tools and materials are available.
Accessory Kit
Items included in the accessory kit (P/N 19079-01) are shown in Table 1.
Table 1 Accessory Kit
Accessory Kit Item
Quantity
(each)
Paper drilling template 1
Large plastic bubble bag 1
Connector enclosure cover 1
Connector enclosure gasket 1
Shoulder screw, 10-32, 0.188 SL 12
Connector conduit, ST sealed 1
Conduit sealing locknut 1
Stud anchor, stainless steel, ⁄-in x 3-in long 6
Set screw, socket, cup 10-32, ⁄-in long 2
Required Tools and Supplies
Use the following tools and supplies to install the antenna:
• Safety goggles
• Power drill (hammer drill recommended)
• ⁄-in diameter x 3-in long masonry bit
• Soft-jaw pliers for “N” type connector (NSN 5120-00-624-80651)
• Torque wrench with in-lb resolution
• Torque wrench with ft-lb resolution
• Phillips head screw driver with in-lb torque wrench adapter
• ⁄-in socket head and open-end wrench with in-lb torque wrench adapter
• ⁄-in open-end wre nch with ft-lb torque wrench adapter
• 20-in straight-edge
• Six ⁄-in 16 x 3 in Trubolt Red Head Wedge Anchors
1National Stock Number (NSN) is a 13-digit numeric code, identifying all the ‘standardized material items
of supply’ as they have been recognized by the United States government.
AA-3233 Subway Rail Antenna
4
