Transduction TR-5001 Manuale utente
TRANSDUCTION
USER’S MANUAL
Version 1.3
06/19/09
TR-5001 NEMA 4 Panel Mount PC
with LCD TFT Touch Screen
5155-23 Spectrum Way, Mississauga, ON, Canada L4W 5A1
TEL: 1-800-268-0427, 905-625-1907
FAX: 905-625-0531
Table of Contents
Important Information ............................................................... i
Warranty .................................................................................. i
Recommended Use ................................................................. ii
Chapter 1 - Introduction
Contents ...................................................................... 2
TR-5001 Specifications ................................................ 3
Driver Installation ........................................................... 4
Touchscreen .................................................................. 5-12
Chapter 2 - SBC introduction
Checklist ..................................................................... 14
Description .................................................................. 14-15
Features ....................................................................... 16
Specifications ................................................................ 17-20
Chapter 3 - Installations
CPU Installation ............................................................. 22
Memory Installation ........................................................ 23
Jumpers on the TR-979 ................................................. 24-29
Connectors on the TR-979 ............................................ 30-45
Watchdog Timer Configuration ...................................... 46
Chapter 4 - BIOS Configuration
BIOS Introduction .......................................................... 48-50
Main Menu .................................................................... 51-52
Standard CMOS Setup ................................................. 53-57
Advanced BIOS Features ............................................ 58-63
Advanced Chipset Features ......................................... 64-67
Integrated Peripherals .................................................. 68-74
Power Management Setup ............................................ 75-78
PnP/PCI Configuration .................................................. 79-81
PC Health Status ........................................................... 82-83
Frequency/Voltage Control ........................................... 84
Load Fail-Safe Defaults ................................................ 85
Load Optimized Defaults .............................................. 85
Supervisor/User Password Settings ............................. 86
Exit Selecting ................................................................ 87
Appendix
I/O Port Address Map ................................................... 89
Interrupt Request Lines (IRQ) ...................................... 90
POST Beep .................................................................. 91
TR-5001 Mechanical Drawings....................................92-100
Important Information
The information in this document is subject to change without notice.
All relevant issues have been considered in the preparation of this document. Should you notice
an omission or any questionable item in this document, please feel free to notify Transduction.
Regardless of the foregoing statement, Transduction assumes no responsibility for any errors that
may appear in this document nor for results obtained by the user as a result of using this product.
Copyright © 2009Transduction. All rights reserved.
This document is protected by copyright. No part of this document may be reproduced, copied or
translated in any form or means without prior written permission from Transduction.
All other trademarks, brand and product names are the property of their respective owners.
Return policy
Products returned for repair must be accompanied by a Return Material Authorization (RMA)
number, obtained from Transduction prior to return. Freight on all returned items must be
prepaid by the customer. The customer is responsible for any loss or damage caused by the
carrier in transit.
To obtain an RMA number, call us at 905-625-1907. We will need the following information:
•Return company address and contract
•Model name, model number and serial number
•Description of the failure
Mark the RMA number clearly on the outside of each box, include a failure report and return the
product to:
Transduction
5155 – 23 Spectrum Way
Mississauga ON Canada L4W 5A1
Attn: RMA Department
TR-5001 User Manual
1i
Recommended Use
Safety Precautions and Maintenance
FOR OPTIMUM PERFORMANCE, PLEASE NOTE
THE FOLLOWING WHEN SETTING UP
AND USING THE TR-5001-PM:
••
••
•DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and
opening or removing covers may expose you to dangerous shock hazards or other
risks. Refer all servicing to qualified service personnel.
•Do not spill any liquids into the cabinet or use your monitor near water.
•Do not insert objects of any kind into the cabinet slots, as they may touch
dangerous voltage points, which can be harmful or fatal or may cause electric
shock, fire or equipment failure.
•Do not place any heavy objects on the power cord. Damage to the cord may cause
shock or fire.
•Do not place this product on a sloping or unstable cart, stand or table, as the
monitor may fall, causing serious damage to the monitor.
•When operating the TR-5001 with its AC 125-240V power supply, use a power
supply cord that matches the power supply voltage of the AC power outlet being
used. The power supply cord you use must have been approved by and comply
with the safety standards of your country. (Type H05VV-F should be used in
Europe)
•In UK, use a BS-approved power cord with molded plug having a black (5A) fuse
installed for use with this monitor. If a power cord is not supplied with this monitor,
please contact your supplier.
•Do not place any objects onto the monitor and do not use outdoors.
•The inside of the fluorescent tube located within the LCD monitor contains
mercury. Please follow the bylaws or rules of your municipality to dispose of the
tube properly.
Immediately unplug your unit from the power source and refer servicing to qualified service
personnel under the following conditions:
•When the power supply cord or plug is damaged.
•If liquid has been spilled, or objects have fallen into the unit.
•If the unit has been exposed to rain or water.
•If the unit has been dropped or the cabinet damaged.
•If the unit does not operate normally by following operating instructions.
•Do not bend power cord.
•Do not use in high temperatured, humid, dusty, or oily areas.
•If glass is broken, handle with care.
•Do not cover vents on unit.
•If monitor or glass is broken, do not come in contact with the liquid crystal and
handle with care.
•Allow adequate ventilation around the unit so that heat can properly dissipate. Do
not block ventilated openings or place near a radiator or other heat sources.
•Handle with care when transporting. Save packaging for transporting.
TR-5001 User Manual
1ii
1
Introduction
This chapter is designed to give you an overview on the TR-5001
industrial PC. The topics covered are as follows:
Contents .................................................................... 2
TR-5001 Specifications ............................................. 3
Driver Installation ..................................................... 4
Touchscreen .............................................................. 5-12
TR-5001 User Manual
1
Contents
Your new TR-5001 box* should contain the following:
•TR-5001 PC/LCD
•Power Cord
•User’s Manual
•CD-ROM with drivers
User’s Manual
*Remember to save your original box and packing material to transport or ship the monitor.
CD-ROM with drivers
2
TR-5001 User Manual
TR-5001 Specications
Model TR-5001 NEMA 4 Panel Mount and Rack Mount Industrial PC with TFT LCD
Touch Screen
Processor Intel Socket 478 for Pentium 4 or Celeron up to 3.6GHz with 800MHz FSB
Display 15” TFT LCD display
Resolution - 1024 x 768 (XGA)
Backlight MTBF 50,000 hours
Brightness - 250cd/m ²
Contrast Ratio - 350:1
USB resistive touch screen
Memory 2 x 184 pin DIMM sockets, up to 2GB DDR memory
Expansion Slots Seven slot backplane with one PICMG CPU card
4 x PCI, 2 x ISA and 1 x SBC slot
Drive Bay 2 x 3.5” HDD (RAID 1 Ok) or Flash SSD
1 x 5.25” SLIM CD-ROM or 1 x 5.25” SLIM DVD-ROM/CD-RW
SVGA Intel 82865GV 16MB graphics controller
1600 x 1200 32-bit @ 60Hz
Ethernet 2 x Intel Pro 100/1000+ Mbps Fast Ethernet ports
Solid State Disk High speed ash SATA SSD 16GB ~ 128GB
I/O 1 x internal XGA LVDS
1 x external SVGA DB15
2 x Serial RS-232
1 x Parallel
2 x USB 2.0
2 x RJ-45 LAN
PS/2/keyboard/mouse connectors
Watchdog Timer 1 ~ 256 seconds
Air Flow Optimized air ow with 62CFM (card cage) and 43CFM (power supply) quality
NIDEC fans
Power Output rating - 300W
Input Voltage - 100 ~ 240VAC @ 47/63Hz
Optional DC input power - 12V, 24V, 48V, 125V and 250V
MTBF 80,000 hours
Safety - UL, cUL, TUV, FCC and CE approved
System Monitor Monitor processor temperature, system temperature and DC power voltages
Operating Temperature Operating Temperature: 0º ~ 50ºC (32º ~ 122ºF), 60ºC (144ºF) for 2 hours
Relative Humidity: 5 ~ 95%
Dimensions 17.25” (W) x 14.25” (H) x 6.4” (D) (6.25” (D) behind front panel)
Rack mount version is 8U high
N.W. 25 lbs, G.W. 30 lbs, CUFT. 6
Chassis Colour Black, OEM colour optional
Warranty 3 years or 10% initial cost for 5 years
Additional Options 8U rack mount version
Rear access Floppy/CD option
Wall mounting bracket
High speed ash SATA SSD 32 ~ 128GB
IDE RAID 1 option
BNC IRIG A/B time sync option
3
TR-5001 User Manual
Driver Installation
The Driver CD will auto-run when inserted in the CDROM drive. It will detect and select your
single board computer and will help you to install the drivers automatically.
Install Related Chipset INF Driver
The selection helps you to install the INF of related chipset interface.
Install VGA Driver
The selection helps you to install the driver of the on-board VGA interface.
Install LAN Driver
The selection helps you to install the driver of the on-board LAN interface.
Install Audio Driver
The selection helps you to install the driver of the on-board audio interface.
Install Hi-Speed USB 2.0 Driver
The selection helps you to install the driver of the on-board USB 2.0 interface.
Browse the CD
The selection helps you to nd the drivers in this CD directly.
4
TR-5001 User Manual
Touchscreen
USB Controller Driver Installation
All Windows drivers are included on the Transduction TR-5001 8-wire Touchscreen Drivers
CD along with Troubleshooting.
NOTE: For Win XP and 2000 you MUST logon with administrator’s password.
TouchKit software on the driver CD has the required drivers and the utility for toggling
between left and right mouse buttons and conguration support. These will all be installed
when Setup.exe is run from the CD.
For Windows 2000/XP
When the New Hardware Found message comes up, choose Cancel. Run the Setup.exe
program from the driver CD.
Please note that the touch screen controller in the TR-5001 is USB and follow the prompts
accordingly.
Windows will copy the les to your hard drive and setup will be complete. (Windows XP will
give a warning message about the TouchKit Controller certication, press Continue anyway.)
Please reboot your computer.
Windows will now nd the device automatically and it will be listed in the Device Manager as:
TouchKit USB Controller.
TouchKit Software
There are ve property pages:
1. GENERAL: Language selection, add/remove devices, 4-point Calibration, Draw Test and
Advanced
4 pts Cal
Choose to calibrate your screen by touching the blinking symbol on the panel until you
get a beep or it stops blinking
Draw Test
Test the drawing position in relation to the display screen to verify panel linearity,
calibration capability and drawing line quality.
5
TR-5001 User Manual
2. SETTING: Sound, Mouse Mode and Double Click Adjustment
Sound
No Sound
Choose to make no sound when panel is touched.
Touch Down
Beep will sound when panel is touched.
Lift Up
The system will not make any sound until nger leaves the touch panel.
Frequency
Sound frequency, drag the cursor from left to right = low to high.
Duration
Sound duration, drag the cursor from left to right = short to long.
Advanced
A 25 Point calibration utility for the touch sensor.
Press Clear to clear previous calibration records.
Press 25 pts Cal to do 25 point calibration by touching the blinking symbol on the panel
until you get a beep or it stops blinking. After calibration, the new record will overwrite
the old one.
6
TR-5001 User Manual
Indice
Altri manuali Transduction Pannello touch
