TreeRing US10C Manuale per l'uso e la cura

Administrator Manual
US10C Time Clock
Enterprise
Time, Attendance and
Workforce Management
February 2020 | Version 1.0.1

ii
Administrator Manual – US10C Time Clock
Notices
© 2020 TreeRing Workforce Solutions, Inc. All Rights Reserved.
TREERING WORKFORCE SOLUTIONS, INC., 4780 Ashford Dunwoody Rd, Suite A-145, Atlanta, GA, 30338
TreeRing Time and eTimeClock are either registered trademarks or trademarks of TreeRing Workforce Solutions, Inc. in the United States
and/or other countries.
Information in this document is subject to change without notice. Without limiting the rights under copyright, no part of this document may be
reproduced, in whole or in part, without the express written permission of TreeRing Workforce Solutions, Inc.
Unless otherwise noted, the example companies, organizations, and employees depicted herein are fictitious and no association with any real
company, organization, or person is intended or should be inferred.
TreeRing Workforce Solutions, Inc. makes no representation or warranty, either expressed or implied, by or with respect to the TreeRing Time
software or anything in this manual or reports created in, but not limited to warranties or merchantability and fitness for a particular purpose.

iii
Administrator Manual – US10C Time Clock
Contents
US10C ........................................................................................................................................................................... 1
US10C-ID ....................................................................................................................................................................... 1
Interface Menu ............................................................................................................................................................. 2
Network Setup .............................................................................................................................................................. 3
Wi-Fi Setup ................................................................................................................................................................... 3
Wireless Configuration ................................................................................................................................................. 4
WI-FI Static Information Setup ..................................................................................................................................... 8
Wired Connection ......................................................................................................................................................... 8
Adding Users for the US10C-ID Clocks .......................................................................................................................... 9
Tips to Punch In/Out ................................................................................................................................................... 12
Clocking In and Out ..................................................................................................................................................... 12
Setting Up the Web Server ......................................................................................................................................... 14
Setting up the Device in Time Clock Server ................................................................................................................ 15
Explanation of Display Control Settings .................................................................................................................. 16
Explanation of Card Parameters Settings ............................................................................................................... 17
Utilizing TCS Events ................................................................................................................................................. 18
Getting Assistance ...................................................................................................................................................... 19

1
Administrator Manual – US10C Time Clock
US10C
Ethernet Clock with Proximity Badge Reader
US10C-ID
Ethernet Clock with Proximity Badge Reader and Biometric Fingerprint Reader
The device supports all standard TreeRing Time punch types, up to 10-digit card IDs, and additional level entries.

2
Administrator Manual – US10C Time Clock
Interface Menu
• IN: Press to begin a shift. You may be prompted for your organizational level and activity.
• OUT: Press to end your shift. You may be asked for the number of hours you worked.
• Lunch Out: Press to take your lunch break.
• Lunch In: Press when returning from lunch.
Note: If a Minimum Lunch Time is configured for your organization, and you try to punch in for a Lunch
Return before that time is up, you will be prevented from punching back in until the Minimum Lunch Time
has passed.
• Break Out: Press when taking a break.
• Break In: Press when returning form your break.
• Switch: You can switch organizational levels during a shift when the department, task, pay, or benefits
change.

3
Administrator Manual – US10C Time Clock
Network Setup
US10C Clocks are set by default to DHCP mode for communication.
Static Communication
If your network requires Static Communication, then that information will need to be entered into the clock
manually. Follow the steps below.
1. Press the Menu key.
2. Go to Comm.
3. Go to Network.
4. Switch DHCP to OFF.
5. Enter in Static Information. Use the Arrow Keys to Navigate. You will need to enter the:
a. IP Address
b. Sub-Net Mask
c. Gateway
d. DNS1
e. DNS2 (If applicable)
6. Highlight Okay and press the Menu/Enter key.
The Clock is now ready for Static Communication.
Wi-Fi Setup
Note: Your wireless range is dependent on several factors, including router capabilities, office physical
operating environment, interference, and device.
Note: Do not plug the WIFI device into an Ethernet port. Doing so will disable the WIFI and require an update
to correct.
WI-FI Password Setup
This device requires the use of a USB Drive in order to enroll the wireless password.
Follow the steps below to prepare the needed file:
1. Obtain a USB Drive and insert it into your computer.
2. In the root folder of the USB Drive create a text file named “zkoption.txt”.
3. Open the “zkoption.txt” file with notepad or preferred text editor.
4. Type “WIFIPassword=” followed by your network’s password.
Note: Remember to type your Wireless Network Password and not “Your_Password” that appears in the
txt file.
5. Save the file and eject the USB Drive. You will use it later to load the password into the clock.

4
Administrator Manual – US10C Time Clock
Wireless Configuration
1. Press the Menu button OK(M/
↲
).
2. Select Comm.
3. Press the Menu button OK(M/
↲
).
4. Select Wireless.
5. Press the Menu button OK(M/
↲
).
6. Select your Wireless Network.
7. Press the Menu button OK(M/
↲
).
8. The Password Setup screen will appear.
9. If you have your USB Drive with the password, insert it into your device, allow the clock a few seconds to
recognize and mount the USB.

5
Administrator Manual – US10C Time Clock
10. Use the navigation keys to select Load Password.
If the USB device loads the password correctly you will see your network password hidden in the text
field.
11. Save the password into the device by clicking the Menu button OK(M/
↲
).

6
Administrator Manual – US10C Time Clock
The following screens will appear. Do not try to perform any other actions with the clock until it
completes this step.
12. After successfully connecting to your wireless network, you should see one of the following icons in the
top right-hand corner of your main screen.
These icons indicate the strength of your wireless signal.
13. Go back to the Comm menu and select WIFI Setup. If the screen displays an IP Address in the lower left
corner, then navigate to the OK button and press the Menu button OK(M/
↲
) to save.

7
Administrator Manual – US10C Time Clock
Note: A reboot may be required after this step.
Questo manuale è adatto per i seguenti modelli
1
Indice

















