TRENDnet TU2-ETG Manuale utente

TU2-ETG

Quick Installation Guide

Table of Contents

Version 05.23.2010

English 1

1. Before You Start

2. How to Install 2

Troubleshooting 4

1. Before You Start

•CD-ROM drive

•USB port: 2.0 or 1.1

Package Contents

System Requirements

Supported Operating Systems CPU Memory

Windows 7 (32/64-bit)

Windows Vista (32/64-bit)

Windows XP (32/64-bit) / 2000

1GHz or above

800MHz or above

300MHz or above

1GB RAM or above

512MB RAM or above

256MB RAM or above

•TU2-ETG

•CD-ROM (Driver)

•Multi-Language Quick Installation Guide

2. How to Install

Note:

Do not connect the TU2-ETG to your computer until instructed to do so.

1. Insert the Driver CD-ROM into your CD-ROM

Drive.

2. Click Run Autorun.exe (Windows 7/Vista Only)

3. Click Install Driver. Then select your

system.

operating

4. Follow the InstallShield Wizard and then click

Finish.

6. Remove the driver CD-ROM from your

computer's CD-ROM drive.

8. Drivers will install automatically.

7. Connect the Adapter to an available USB port

of your computer.

9. Connect a RJ-45 cable from the Adapter to a

Switch, Router or Cable/DSL Modem.

Your Installation is complete.

5. Click Exit.

I inserted the Driver CD-ROM into my computer's CD-ROM Drive and the

installation menu does not appear automatically. What should I do?

For Windows 7, if the installation menu does not appear automatically, click on

the Windows Icon on the bottom left hand corner of the screen, click the

“Search programs and files” box, and type D:\autorun.exe, where “D” in

“D:\autorun.exe” is the letter assigned to your CD-ROM Drive, and then press

the ENTER key on your keyboard.

2. For Windows Vista, if the installation menu does not appear automatically, click

Start, click the Start Search box, and type D:\autorun.exe where "D" in

"D:\autorun.exe" is the letter assigned to your CD-ROM Drive, and then press

the ENTER key on your keyboard.

3. For Windows XP/2000, if the installation menu does not appear automatically,

click Start, click Run, and type D:\autorun.exe where "D" in "D:\autorun.exe" is

the letter assigned to your CD-ROM Drive, and then press the ENTER key on

your keyboard.

2. Can I connect or disconnect the TU2-ETG while the computer is on?

Yes, you can connect or disconnect TU2-ETG while the computer is on because

the USB interface is Plug-and-Play compliant and hot-pluggable.

3. Windows is unable to recognize my hardware. What should I do?

1. Make sure your computer meets the minimum requirements as specified in

Section 1 of this Quick Installation Guide.

2. Try plugging the adapter into a different USB port.

4. Windows recognizes my new hardware, but I'm unable to connect to my

network. What should I do?

1. Verify that the RJ-45 Ethernet cable is securely connected from your switch or

router to your adapter.

2. Verify that the LEDs on your adapter are lit.

3. Verify that the TCP/IP settings are set to Obtain an IP address automatically.

5. When I connect my adapter to a Gigabit switch, I am not getting Gigabit speeds.

What should I do?

Make sure you are using CAT-5e or CAT-6 Ethernet Cables. Some CAT-5 cables

are not rated to run in Gigabit.

If you still encounter problems or have any questions regarding the TU2-ETG, please

contact TRENDnet's Technical Support Department.

Troubleshooting

Altri manuali per TU2-ETG

Indice

Altri manuali TRENDnet Adattatore

TRENDnet

TRENDnet TEW-648UBM Manuale utente

TRENDnet

TRENDnet TE-PCIWTplus Manuale utente

TRENDnet

TRENDnet TEW-649UB - Mini Wireless N Speed USB 2.0... Manuale utente

TRENDnet

TRENDnet TEW-424UB Manuale utente

TRENDnet

TRENDnet TEW-649UB - Mini Wireless N Speed USB 2.0... Manuale utente

TRENDnet

TRENDnet TEW-805UBH Manuale utente

TRENDnet

TRENDnet TEW-AMBA - Manuale utente

TRENDnet

TRENDnet TU2-IDSA Manuale utente

TRENDnet

TRENDnet TEW-645UB Manuale utente

TRENDnet

TRENDnet TEW-648UB - 150Mbps Mini Wireless N USB 2.0... Manuale utente

TRENDnet

TRENDnet TPL-401E2K Manuale utente

TRENDnet

TRENDnet TPL-302E2K - Powerline AV Fast EN Adapter Manuale utente

TRENDnet

TRENDnet TEW-804UB Manuale utente

TRENDnet

TRENDnet TEW-401PC Manuale utente

TRENDnet

TRENDnet TU3-ETG Manuale utente

TRENDnet

TRENDnet TU2-DVIV Manuale utente

TRENDnet

TRENDnet TPL-307E Manuale utente

TRENDnet

TRENDnet TPL-407E Manuale utente

TRENDnet

TRENDnet TPL-401E Manuale utente

TRENDnet

TRENDnet Powerline 1300 AV2 Adapter with Built-in... Manuale utente

TRENDnet

TRENDnet TPL-304E2K Manuale utente

TRENDnet

TRENDnet TBW-103UB Manuale utente

TRENDnet

TRENDnet TU-ET10 Manuale utente

TRENDnet

TRENDnet TEW-624UB Manuale utente

Manuali Adattatore popolari di altre marche

PCB Piezotronics

PCB Piezotronics 090B274 Manuale utente

Auvidea

Auvidea J20 Manuale del prodotto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuale utente

Akribis

Akribis ITF-21-BISS-MIT Manuale utente

Tenda

Tenda W54U Manuale utente

ROHO

ROHO AGILITY Manuale utente

PROLiNK

PROLiNK WN2001 Manuale utente

Hawking

Hawking HUF2 Manuale utente

Airlink101

Airlink101 AWLC4030 Manuale utente

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuale utente

Philips

Philips SWA4554S/10 Manuale utente

JVC

JVC TS-C9D2B Manuale di istruzioni

NETGEAR

NETGEAR A6100 Manuale utente

D-Link

D-Link DWA-121 Manuale utente

Philips

Philips SWA2037 Manuale utente

Basalte

Basalte 0610-20 Manuale utente

Yealink

Yealink EHS40 Manuale utente

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuale utente