TRENDnet TEW-AI86D Manuale utente

TEW-AI86D

TEW-AI86DB

User’s Guide

size: W 75mm x H135mm

total pages: 39

Table of Contents

English .....................................................................................

Troubleshooting ........................................................................

1. Before You Start

2. Hardware Installation .......................................................

..............................................................

Version: 11.28.05

Version:01.04.2006

1. Before you start

English

WARNING: The antenna can tilt 0° to 180° and rotate 360° .

The Internal antenna wire is fixed, therefore do not rotate the

antenna beyond 360° .

Wall / partition mount (Antenna base with embedded

magnets)

For antenna deployment, you can mount the antenna onto a wall

using the fasteners and screws included or simply stick to metal

surfaces.

TEW-AI86D/TEW-AI86DB

Antenna Mounting Base (TEW-AI86DB only)

User’s Guide

Mounting Kit (TEW-AI86DB only)

Package Content

Product details

The Directional IndoorAntenna has a reverse SMAfemale

connector that can be connected to yourAccess Point or Wireless

NetworkAdapter.

English

2. Hardware installation

Wireless base stations with detachable antenna(s):

As a method of focusing signal broadcast to achieve longer range

coverage in your home or office, the antenna generates an 80°

wide directional signal.

Due to the bi-directional nature of WiFi

devices (receive / transmit), it is recommended that you install

external antennas on theAP base station as well as the client.

Recommendation:

Recommended devices to connect with this antenna

Wireless PCI adapter or IP Camera with detachable Antenna

TEW-AI86D antenna has directional 80° signal coverage.

Therefore, the ideal position for the antenna is in the corner of the

covered area.

Recommended installation positions

English

TEW-AI86D antennas can also be placed at the side / edge of the

covered area for long range hall / corridor transmission.

English

Antenna Base Mounting Methods & Configuration

PLEASE READ THE FOLLOWING INSTALLATION

STEPS BEFORE DRILLING HOLES IN THE WALL.

After removing the bottom cover from its seating, remove the

metal weight plate from the ceiling clips to expose the screw holes.

Press Tab Lift Cover Remove weight plate

Select location Place

base template

Mark screw

position

WARNING: Please make sure that theAP / Client device

can reach your selected antenna position (Antenna Cable is 1

meter / 3 feet)

After you have marked the wall for the appropriate drilling sites, re-

assemble the antenna stand without the metal weight. The clips

should not protrude.

In order to decrease the weight and increase the

magnetic power, it is highly recommended that the metal

plate be removed before installing antenna onto ceiling,

partition, or any metal surface.

English

After drilling holes in the drywall / gypsum / plasterboard, sink the

plastic anchor into the hole (1/8 inch drill bit (3mm)). Leave about

3 to 5mm (1/8 inch) of the threaded screw exposed as depicted in

the diagrams below.

The special ceiling mount feature is mainly recommended for use

when your wireless base station is hidden over the ceiling or some

kind of anti-theft protection case is implemented.

Ceiling Mount Using Ceiling Clips or Magnets

About the screws

3mm

English

How to assemble the antenna stand for use with

ceiling systems.

Note: If the ceiling tees are made of steel, turning the

antenna base cover over may not be necessary, because the base

has embedded magnets which can be used to adhere the antenna

to the ceiling tee.

Press tab and lift Turn over cover,

remove metal weight plates,

exposing the ceiling clips.

Secure Clips to Tee Conceal AP/Router

Troubleshooting

Certifications

This equipment has been tested and found to comply with FCC and CE Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received.

Including interference that may cause undesired operation.

Wasteelectricalandelectronicproductsmustnot

be disposed of with household waste. Please

recycle where facilities exist. Check with you

LocalAuthorityorRetailerforrecyclingadvice.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FORANY RADIO OR TV INTERFERENCE

CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS

COULD VOID THE USER’SAUTHORITY TO OPERATE THE EQUIPMENT.

Q1.

A1.

Q2.

A2.

Q3.

A3.

Q4.

A4.

How come I cannot transmit or receive Wi-Fi signals with my TEW-

AI86D?

The TEW-AI86D is a directional antenna and can only send and

receive signals from the front panel. Make sure to adjust the position

of the antenna by directing the front panel to laptops, PCs or other

wireless devices.

My access point indicates that it is receiving power, and my laptop

is within range of the TEW-AI86D. However, my laptop does not

receive any signals from my access point.

Make sure that you properly connect the antenna to the Wi-Fi

Access Point. (See 2. Hardware Installation)

Why won’t the TEW-AI86D work with my IEEE 802.11a Wireless

Router or Access point?

Yes. The TEW-AI86D is compatible with IEEE 802.11a/b/g

wireless devices.

Is it necessary to use the tapping screws or the wall anchors that

come with the TEW-AI86DB?

It is only necessary if you decide to mount the TEW-AI86DB at a

permanent location. Use discretion when attaching mounting

brackets to the TEW-AI86DB.

If you have any questions regarding the TEW-AI86D/TEW-AI86DB, please

contact TRENDnetTechnical Support Department.

Limited Warranty

TRENDnet warrants its products against defects in material

and workmanship, under normal use and service, for the

following lengths of time from the date of purchase.

TEW-AI86D/TEW-AI86DB - 3 Years Warranty

If a product does not operate as warranted above during the

applicable warranty period, TRENDnet shall, at its option and

expense, repair the defective product or part, deliver to

customer an equivalent product or part to replace the

defective item, or refund to customer the purchase price paid

for the defective product. All products that are replaced will

become the property of TRENDnet. Replacement products

may be new or reconditioned.

TRENDnet shall not be responsible for any software,

firmware, information, or memory data of customer contained

in, stored on, or integrated with any products returned to

TRENDnet pursuant to any warranty.

There are no user serviceable parts inside the product. Do

not remove or attempt to service the product by any

unauthorized service center. This warranty is voided if (i) the

product has been modified or repaired by any unauthorized

service center, (ii) the product was subject to accident, abuse,

or improper use (iii) the product was subject to conditions

more severe than those specified in the manual.

Warranty service may be obtained by contacting TRENDnet

office within the applicable warranty period for a Return

Material Authorization (RMA) number, accompanied by a copy

of the dated proof of the purchase. Products returned to

TRENDnet must be pre-authorized by TRENDnet with RMA

number marked on the outside of the package, and sent

prepaid, insured and packaged appropriately for safe

shipment.

Altri manuali per TEW-AI86D

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali TRENDnet Antenna

TRENDnet

TRENDnet TEW-AI07OB Manuale utente

TRENDnet

TRENDnet TEW-IA04O Manuale utente

TRENDnet

TRENDnet TEW-AI75OB - 11a/g 7/5dBi Indoor Omni Directional... Manuale utente

TRENDnet

TRENDnet TEW-AI75O Manuale utente

TRENDnet

TRENDnet TEW-AI77OB - Duo 7dBi Indoor Omni Directional... Manuale utente

TRENDnet

TRENDnet TEW-AO14D - Manuale utente

TRENDnet

TRENDnet TEW-AO08O Manuale utente

TRENDnet

TRENDnet TEW-AI86D Manuale utente

TRENDnet

TRENDnet TEW-AI07OB Manuale utente

TRENDnet

TRENDnet TEW-AO10O Manuale utente

TRENDnet

TRENDnet TEW-OA08OK Manuale utente

TRENDnet

TRENDnet TEW-OA24D Manuale utente

TRENDnet

TRENDnet TEW-AI86D Manuale utente

TRENDnet

TRENDnet TEW-AO14D - Manuale utente

TRENDnet

TRENDnet TEW-IA06D Manuale utente

TRENDnet

TRENDnet TEW-IA06D Manuale utente

TRENDnet

TRENDnet TEW-AI75O Manuale utente

TRENDnet

TRENDnet TEW-AO46S Manuale utente

TRENDnet

TRENDnet TEW-AO19D Manuale utente

TRENDnet

TRENDnet TEW-OA24D - 24dBi Outdoor Directional Antenna B... Manuale

TRENDnet

TRENDnet TEW-AI75OB - 11a/g 7/5dBi Indoor Omni Directional... Manuale utente

TRENDnet

TRENDnet TEW-AO46S Manuale utente

TRENDnet

TRENDnet TEW-AI77OB - Duo 7dBi Indoor Omni Directional... Manuale utente

TRENDnet

TRENDnet TEW-AO12O Manuale utente

Manuali Antenna popolari di altre marche

Alfa Network

Alfa Network APA-L01 Manuale utente

Naval

Naval PR-422CA Manuale utente

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Manuale utente

TERK Technologies

TERK Technologies TV44 Manuale utente

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Manuale utente

HP J8999A Manuale utente

MobilSat

MobilSat MSP-S Manuale utente

Steren

Steren ANT-UHF 13 Manuale utente

Novatel

Novatel 600-G Manuale operativo

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Manuale utente

Radio Shack

Radio Shack 15-1837 Manuale utente

CommScope

CommScope CMAX-OMFX-43M-I53 Manuale utente

Ramsey Electronics

Ramsey Electronics DAP25 Manuale utente

COBHAM

COBHAM SAILOR 800 VSAT Manuale per l'uso e la cura

Trango Systems

Trango Systems AD900-9 Manuale utente

Steren

Steren ANT-100 Manuale utente

Proxim

Proxim 5054-PA-23 Manuale utente

IWCS

IWCS iriBelt II Guida all'installazione