TRENDnet TEM100-56R Manuale utente
1
TRENDnet
TEM100-56R
XpressPort
10/100 Fast Ethernet + 56K
Fax/Modem Integrated PC
Card
Quick Installation Guide
2
1. INSTALLATION
The quick installation guide describes how to install
your Intergared PC Card in major popular Network
Operating Systems. And more can be found in detail
manual diskette .
1.1. HARDWARE INSTALLATION
1. Hold the card label up and insert the card into the
computer's PCMCIA slot with the 68 pin
connector facing the computer.
2. Connect the RJ-45 (8-pin) plug to the LAN and
the RJ-11 (6-pin) plug to the telephone wall
outlet.
3
1.2. INSTALLING THE SOFTWARE
1.2.1. Windows 95 Installation
1.Assume that the PCMCIA card reader and drivers
have been loaded and well functioning. The System
Icon in the Control Panel can report on its
functionality. If not, check your computer dealer
for technical support.
2.Insert your PC Card into PCMCIA slot. Windows
95 will prompt New Hardware Found dialog box.
In New Hardware Found dialog box, select
Driver from disk provided by hardware
manufacturer.
3.Enter the correct path, i.e. “A:\”, then insert the
driver disk. The driver will be installed
automatically, and system may ask for the
Windows 95 installation CD disks to update the
4
existing files or drivers. After the update, system
will reboot automatically.
4.For the first time installation, click Network icon in
Control Panel to correctly add Protocols, Client
and Service according to your application
requirements.
5.Reboot the machine and the card will fully
function.
1.2.2. Working with Windows 98
1. Turn on your computer.
2. Insert your PC Card into the free PCMCIA slot,
and make sure it is firmly seated.
3. Windows 98 will prompt New Hardware Found
then Add New Hardware Wizard dialog box.
Click Next.
5
4. Select “Search for the best driver for your
device (Recommended)”, then click Next.
5. Insert the driver disk, select “Floppy disk drives”,
then click Next.
6
6.Reboot the machine and the card will fully
function.
1.2.3. NT 4.0 Installation
Installation in NT 4.0
1. Insert the PC Card into one of the PCMCIA Slots
2 Start Windows NT 4.0 and login with a full access
level ADMINISTRATOR
3. Open MY COMPUTER ÆCONTROL PANEL
ÆNETWORK.
If Network has not been installed,
♦ Select YES to start Network installation,
♦ Press Next and press SELECT FROM LIST
button, then press HAVE DISK button,
♦ Insert the driver disk into drive floppy disk drive,
then enter the correct path.
♦ Select the only one choice for the Direct PortPC
Card, then press OK and NEXT
♦ Windows NT 4.0 will grant configurations for
-- TCP/IP
-- NWLink IPX/SPX
-- NetBEUI
These configurations are unique for each
network. If you want to change them, ask your
network administrator for help.
♦ Press Next twice to use default NETWORK
SERVICES settings
♦ Enter the correct path for NT 4.0 system source
files.
♦ A dialog box will pop up. Give appropriate
system resources to the DirectPort 10/100 Fast
Ethernet + 56K Fax/Modem PC Card; the
settings must be unique for this device. Refer to
7
”Resources Recommendation” for NT 3.51
details
♦ Press NEXT twice. Enter COMPUTER NAME
then press NEXT, then Press FINISH
If Network has been installed
♦ Select ADAPTERS
♦ Press ADD to add network adapters
♦ Press HAVE DISK button
♦ Insert the DirectPort PC Card driver disk into
floppy disk drive
♦ Enter the correct path for Windows NT 4.0
drivers then press OK.
♦ A dialog box will pop up. Give appropriate
system resources to the 10/100 Fast Ethernet +
56K Fax/Modem PC Card; the settings must be
unique for this device. Refer to ”Resources
Recommendation” for NT 3.51 details
♦ Press OK when all setting are completed.
♦ Press CLOSE to complete NETWORK setting
♦ Reboot Windows NT.
Modem configuration for NT 4.0
1. Open MY COMPUTER ÆCONTROL PANEL
ÆMODEMS
2. Using default settings and press NEXT
3. System should have detected your DirectPort
PC Card, and enter the Modem Manufactures
& Models list screen.
4. Press FINISH and then CLOSE to complete
modem setting. and reboot the system
5. The installations for both LAN and Modem are
completed.
8
Apple/Macintoch
Your Integrated PC card can also allow you run
Apple/Macintoch palteform. Please follow the below
procedure carefully to get your PC Card up and
running.
System Requirements
In order to let your PC Card perform at more efficient
speed, please check your system to meet the
following requirement:
✔For the following PowerBooks, it requires
System7.5.1 or later:
PowerBook 1400, or PowerBook 5300
✔For the following PowerBooks, it requires
System 7.6.1or later:
PowerBook 2400, PowerBook 3400, or G3.
✔8 MB of RAM installed for System 7.5 or 16 MB
for Systems 7.5
✔4 MB of available hard drive space
Driver Installation
Please follow the following procedure to install the
MAC driver:
9
◆Important Note: Please disable any virus-
protection application before you installing the
Modem Driver.
ΚTurn on your PowerBook computer
ΚInsert your Integrated PC Card Driver disk
into your floppy disk drive
ΚDouble-click the “Installer Icon” on the driver
disk
ΚClick “Install” to install the driver into your
hard drive
ΚClick “Restart” to re-boot your PowerBook
Now you are ready to use your Integrated PC Card
with your Apple Power Book.
10
FCC Certification
10/100 Fast Ethernet + 56K Fax/Modem PC Card
FCC ID: MQ4PLM56
Made in Taiwan
The United States Federal Communication Commission (FCC) and
the Canadian Department of Communications have established
certain rules governing the use of modems and other electronic
equipment.
FCC Part 68 Registration
This high speed 10/100 Fast Ethernet + 56K FAX/MODEM PC
Card complies with FCC Part 68 rules, and the use of this modem
is subject to the following restrictions:
1. The FCC has established rules which permit this device to be
directly connected to the telephone network. Standardized jacks
are used for these connections. This equipment should not be
used on party lines or coin phones.
2. If this device is malfunctioning, it may also be causing harm to
the telephone network; this device should be disconnected until
the source of the problem can be determined and until repair has
been made. If this is not done, the telephone company may
temporarily disconnect service.
3. The telephone company may make changes in it's facilities,
equipment, operation and procedures; if such changes affect the
compatibility or use of this device, the telephone company is
required to give adequate notice of the situation with the FCC.
4. If the telephone company requests information on what
equipment is connected to their lines, inform them of:
a. The telephone number to which this unit is connected.
b. The Ringer Equivalence Number (REN).
c. The USOC jack required.
d. The FCC Registration number.
Items (b) and (d) are indicated on the label. The Ringer
Equivalence Number (REN) is used to determine how many
devices can be connected to your telephone line. In most areas, the
sum of the REN's of all the devices on any one line should not
exceed 5.0. If too many devices are attached, they may not ring
properly.
Altri manuali per TEM100-56R
1
Indice
Altri manuali TRENDnet Hardware per computer
TRENDnet
TRENDnet TE100-PC16R Manuale utente
TRENDnet
TRENDnet TEG-PCBUSR Manuale utente
TRENDnet
TRENDnet TFM-560R Manuale utente
TRENDnet
TRENDnet TEW-443PI Manuale utente
TRENDnet
TRENDnet TEG-PCBUSR Manuale utente
TRENDnet
TRENDnet TU2-H4PC Manuale utente
TRENDnet
TRENDnet TEG-PCITXR Manuale utente
TRENDnet
TRENDnet TFW-H2PC - DATA SHEETS Manuale utente
TRENDnet
TRENDnet TU3-H2EC Manuale utente
TRENDnet
TRENDnet TU2-H4PC Manuale utente
TRENDnet
TRENDnet TEW-301PC Manuale utente
TRENDnet
TRENDnet TEW-621PC - 300Mbps Wireless N PC Card... Manuale utente
TRENDnet
TRENDnet TU2-PCBUS Manuale utente
TRENDnet
TRENDnet TEW-621PC - 300Mbps Wireless N PC Card... Manuale utente
TRENDnet
TRENDnet TE100-PCBUSR - DATA SHEETS Manuale utente
TRENDnet
TRENDnet TU2-H2PC Manuale utente
TRENDnet
TRENDnet TU2-H4PC Manuale utente
TRENDnet
TRENDnet TE100-PCBUSR - DATA SHEETS Manuale utente
TRENDnet
TRENDnet TEG-SK2 Manuale utente
TRENDnet
TRENDnet TEW-401PC Manuale utente
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
