TRENDnet TEW-301PC Manuale utente

2.4GHz 22Mbps Wireless

Network PC Card

Quick Installation Guide

System Requirements:

-Windows 98, 98SE, Millennium Edition (ME), 2000 and XP computers

-PC with Pentium II 300MHz system or above is recommended

-Equipped with at least one 32-Bit PC Cardbus socket or PC Cardbus adapter.

-One CD-ROM drive

Setup and Installing the 22Mbps Wireless Network PC Card

Note! 22M WLAN Adapter Utility Setup will disable the WinXP Zero Configuration Utility for Wireless LAN.

If you want to enable the 802.1X Authentication Security Function in WinXP Zero Configuration Service,

please exit from the 22M WLAN Adapter Utility Installation, and use the Win XP Zero Configuration Utility

only.

Installing Utility Program

Please note that the installation screens in this quick guide are captured from WindowsXP. The other

Windows systems will have similar screen for the installation procedure.

Make sure that the

22Mbps Wireless

Network PC Card is NOT

inserted into the Cardbus

slot.

Turn on the computer.

Insert the software CD

into the CD-ROM Drive.

Click on the “PC

Card/PCI Card” option

on the left selection menu.

Click on “Install” button

to start Utility installation.

InstallShield Wizard

starts. Click “Next” to

continue.

-Turn off your computer

-Insert the 22Mbps Wireless Network PC Card into the CardBus slot in your

notebook

-Turn on your computer

-Continue with Driver Installation.

Click “Next” to install the

program files in the

default folder.

Select the second option,

and click “Finish” to

complete the installation.

Installation of Driver Files

Please note that letter “D:\” represents the

CD-ROM driver letter, and select folder

“Win98” when installing under Windows 98

O/S or WinME2000 for Windows ME or

2000 O/S.

Select the second option

and click “Next” to

continue.

Go to D:\Driver\WinXP

Click “OK”

Select first option then

click on the checkbox

click “Browse” button to

specify the driver file

folder.

Click “Next” to continue

Click “Continue

Anyway” to continue

Click “Finish” to

complete new hardware

installation.

Configuring 22Mbps Wireless PC Card

You can now launch the configuration utility by clicking on the utility program icon in

the system tray on lower-right corner of the screen,

or by double-clicking on icon in your desktop.

The following screen would appear, and you can proceed with configuration of the

22Mbps Wireless Network PC Card by clicking Configuration page on the left menu.

SSID: Service Set Identifier, which is a unique name shared among all clients and

nodes in a wireless network. The SSID must be identical for each clients and nodes in

the wireless network.

BSS Type: There are two types available for selection

zInfrastructure – to establish wireless communication with LAN and other

wireless clients through the use the Access Points.

zAd-Hoc – to establish point-to-point wireless communication directly with

other wireless client devices such as wireless network PC Card.

Channel: The value of channel that AP will operate in. You can select the channel

range of 1 to 11 for North America (FCC) domain, 1 to 13 for European (ETSI) domain

and 1 to 14 for Japanese domain.

Tx Rate: Select the data rate for data transmission.

Preamble: Select Long or Short Preamble type. Default is Long Preamble. Preamble

is a sequence of bits transmitted at 1Mbps that allows the PHY circuitry to reach

steady-state demodulation and synchronization of bit clock and frame start. The Short

Preamble is recommended for high network traffic environments. The Preamble type

used must match that of the wireless Router or Access Point in order to communicate

on the network.

Power Mode:

-Continuous Access Mode (default): the PC Card is constantly operating with full

power and it consumes the most power

-Maximum Power Save: the PC Card consumes the least power and only operates

when there is wireless network activity.

-Power Save: the PC Card consumes the moderate level of power.

For the changes made to any of the items above to be effective, click “Apply”.

Configuring TCP/IP Setting For 22Mbps Wireless PC Card

Dynamic IP Address V.S. Static IP Address

By definition Dynamic IP addresses are the IP addresses that are being automatically

assigned to a network device on the network. These Dynamically assigned IP

addresses will expire and may be changed over time.

Static IP addresses are the IP addresses that users manually enter for each of the

network adapters.

!Note: There might be two or more Local Area Connection to choose from. You must

select the one that you will use to connect to the network.

Go to Start menu > Control

Panel > Network

Connections > Right-click on

the active Local Area

connection > Select

“Properties”

Dynamically Assigned IP Address

The TCP/IP Properties window

appears.

Select “Obtain an IP address

automatically” if you are on a

DHCP enabled network.

Click “OK” to close the window

with the changes made

The Local Area Connection

Properties would appear.

Select “Internet Protocol

(TCP/IP)” and Click

“Properties” to continue.

22Mbps WLAN Adapter

Static IP Address

!Note: The IP address must be within the same range as the wireless route or Access

Point.

Please note that the installation screens in this quick guide are captured from WindowsXP. The other

Windows systems will have similar screen for the TCP/IP configuration procedure.

Select “Use the following IP

address”

Enter the IP address and subnet

mask fields.

Enter the IP address of the Router

in the Default gateway field.

Enter the IP address of the Router

in the DNS server field

Click “Ok” to close the window

Altri manuali per TEW-301PC

Altri manuali TRENDnet Hardware per computer

TRENDnet

TRENDnet TEW-301PC Manuale utente

TRENDnet

TRENDnet TU3-H2EC Manuale utente

TRENDnet

TRENDnet TEW-621PC - 300Mbps Wireless N PC Card... Manuale utente

TRENDnet

TRENDnet TEW-601PC - SUPER G MIMO WRLS PC CARD Manuale utente

TRENDnet

TRENDnet TFW-H2PC - DATA SHEETS Manuale utente

TRENDnet

TRENDnet TEW-401PCplus Manuale utente

TRENDnet

TRENDnet TEG-SK2 Manuale utente

TRENDnet

TRENDnet TU3-H2EC Manuale utente

TRENDnet

TRENDnet TEG-PCBUSR Manuale utente

TRENDnet

TRENDnet TEW-421PC Manuale utente

TRENDnet

TRENDnet TIM-128 Manuale utente

TRENDnet

TRENDnet TFW-H2PC - DATA SHEETS Manuale utente

TRENDnet

TRENDnet TEG-PCBUSR Manuale utente

TRENDnet

TRENDnet TU2-PCBUS Manuale utente

TRENDnet

TRENDnet TEW-621PC - 300Mbps Wireless N PC Card... Manuale utente

TRENDnet

TRENDnet TU2-H2PC Manuale utente

TRENDnet

TRENDnet TEG-PCBUSR Manuale utente

TRENDnet

TRENDnet TU3-H2EC Manuale utente

TRENDnet

TRENDnet TU2-H4PC Manuale utente

TRENDnet

TRENDnet TEW-601PC - SUPER G MIMO WRLS PC CARD Manuale di istruzioni

TRENDnet

TRENDnet TE100-PC16R Manuale utente

TRENDnet

TRENDnet TEW-421PC Manuale utente

TRENDnet

TRENDnet TEG-PCBUSR Manuale utente

TRENDnet

TRENDnet TEW-226PC Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente