Trident OpenROV Manuale utente
Trident wall charger - All connection
points must be dry before charging.
Attach D-ring connector to Trident only.
6
Trim weights - Not needed in freshwater.
To maintain neutral buoyancy in
saltwater, attach to the underside of
Trident. This location is indicated by a
weight symbol.
7
Trident Underwater Drone.
1
Tail strap - Improves tether integrity
when handling Trident via tether.
2
Tether & charger connection point -
Connection point must be dry before
connecting tether or charger.
3
Topside - Sends video and control data
to and from Trident to the controller via
WiFi hotspot.
5
25m tether - Kevlar-reinforced data
cable that sends video and control data
from the topside to Trident. It has the
same D-ring connector on each side.
4
1
2
3
5
4
6
In the box:
7
DOC-000007-03
Operations
Manual
Quick-start .............................................
Dive procedures .....................................
Quick-start continued ..............................
Connect controller to Trident .....................
Dashboard screen .................................
Past dives screen .....................................
Pilot screen ..........................................
Tablet/phone controls ................................
Game pad controls ..............................
Record video ......................................
Preview recorded 1080p on Trident ...........
Download 1080p video to device ..............
View downloaded 1080p ..........................
View recorded 720p pilot ..........................
Share recorded video to cloud storage .....
Export video via computer connection ......
Record to device (controller) SD card ...
Manage updates ...............................
Tail board LED indicators .....................
Maintenance & care ..................................
Battery safety ............................................
Regulatory information ..............................
1-2
3-4
5-9
10
11
12
13-14
15
16-18
19-24
25
26
27
28
29
30
31-32
33-34
35-36
37
38
39
Table of contents
Quick-start
Device
(Tablet/phone or game pad)(WiFi hotspot)
TopsideTether connector
Outlet
Charger
Charger connector
Connecting Trident:
1.
Quick-start
2.
Attach trim weights
for saltwater dives
Screw trim weights to the underside of
Trident. This location is indicated by a
weight symbol.
Trident is neutrally buoyant in freshwater.
For neutral buoyancy in brackish water
attach trim weights if needed.
Trim weights are found close to the
tether reel, in the foam at the bottom of
the box.
For neutral buoyancy in saltwater attach
trim weights.
Before dive:
Unroll a couple meters of tether before diving
and as needed throughout the dive.
Make sure the topside and tether are safely
secured. It is important to keep the topside close
to you and easily retrievable.
Both the Trident topside and tether reel are water
resistant (splashes okay), but they were not
designed to be submerged. Please be careful to
keep them safely on the boat or dock when
operating Trident.
It is recommended to update both the OpenROV
app and Trident software before you head out to
the water. Refer to pages 33 & 34 for more details.
3.
Dive procedures
Operating Trident in strong currents.
You need to raise or lower
Trident from the water
by tether.
Use tail strap when:
Rinse Trident with fresh water after every
dive.
Be sure to keep tether plugged in while
rinsing to protect the electrical contacts.
After rinsing remove tether and dry
connector area with cloth or towel.
During dive:
Avoid areas with lots of WiFi traffic to
ensure uninterrupted topside signal
quality.
If the app freezes or is buggy during a
dive, restart the app. Don’t disconnect
your Trident from the topside (turning
off) as this can cause video corruption.
After dive:
See page 37 for important details
regarding maintenance & care.
Don't drive Trident through seaweed or
other vegetation as it can get stuck in
the propellers.
Avoid rocks, branches, or other objects
that can potentially damage Trident or
pose a risk for entanglement.
Avoid animals, fish, or other sensitive
living things like corals which can be
easily damaged.
Only keep the amount of tether you
need in the water to avoid
entanglement.
Dive procedures
4.
Screw the charger
connector to Trident.
Tighten charger
connector snugly to
ensure a proper
connection.
5.
Charge Trident battery
1
Quick-start
Refer to “dive procedures”
on pgs. 3-4 before diving
your Trident.
Quick-start
Discharging battery
level indicators
( While Trident is in use )
0-39 % Low battery
.....
75-95 %
.....
50-74 %
.....
40-49 %
.....
95-100 % Full battery
.....
Charging
4 solid green LEDs
Blinking green LEDs
Fully charged
6.
Indice
