Tridonic LuxControl DALI XC Manuale utente

luxCONTROL

DALI XC

Manufacturer

Document number

Tridonic GmbH & Co KG

Färbergasse 15

6851 Dornbirn

Austria

Tel. +43-(0)5572-395-0

Fax +43-(0)5572-20176

www.tridonic.com

DALI XC_IB 3.0 | 01.2014 | en

DALI XC_IB 3.0 | 01.2014 | en 3

Table of contents

..................................................................................................................................4

1 How to use this manual

..................................................................................................................................5

2 Safety instructions

..................................................................................................................................6

3 Device description

...............................................................................................................................73.1 Application area

...............................................................................................................................73.2 Operating modes

...............................................................................................................................83.3 Acoustic signals

..................................................................................................................................9

4 Project design

..................................................................................................................................12

5 Commissioning

...............................................................................................................................135.1 Starting commissioning

...............................................................................................................................155.2 Grouping luminaires

...............................................................................................................................165.3 Finishing commissioning

..................................................................................................................................17

6 Saving scenes

..................................................................................................................................18

7 Regrouping luminaires

..................................................................................................................................21

8 Operation

...............................................................................................................................218.1 Changing intensity

.............................................................................................................21Single momentary-action switch control8.1.1

.............................................................................................................22Double momentary-action switch control8.1.2

...............................................................................................................................238.2 Changing colour temperature

...............................................................................................................................238.3 Recalling scenes

..................................................................................................................................24

9 System extension

...............................................................................................................................249.1 Starting system extension

...............................................................................................................................269.2 Adding or changing luminaires

...............................................................................................................................279.3 Adding or changing DALI XC devices

...............................................................................................................................289.4 Finishing system extension

..................................................................................................................................29

10 Technical data

How to use this manual

DALI XC_IB 3.0 | 01.2014 | en 4

1 How to use this manual

We are pleased that you have chosen this Tridonic GmbH & Co KG product. So that you can get the most from this

manual, the following information will be set out in this section:

Characters and symbols in this manual

Further information

Note

These commissioning instructions describe how to use the DALI XC in the comfortDIM system.

Characters and symbols in this manual

The following characters and symbols are used in this manual:

Character/

symbol

Description

Individual steps in the instructions are numbered.

Single-step instructions are indicated by at the beginning of the line.

After a step has been described, a description of the expected results will follow. These results are indicated

by at the beginning of the line.

—

Requirements which need to be checked before carrying out a step are indicated by —.

Notes can be recognised by i. In addition, notes are identified by the word Note.

Table 1: Characters and symbols in this manual

Further information

More information on installing the DALI XC can be found in the installation instructions supplied with the device.

General information on our products can be found on our website: www.tridonic.com

Safety instructions

DALI XC_IB 3.0 | 01.2014 | en 5

2 Safety instructions

The device may only be used for the application area specified.

Relevant health and safety regulations must be observed.

When assembling and installing the device, the voltage supply must be disconnected.

Only qualified personnel may assemble, install and commission the device.

If an error occurs, dangerous voltage levels may be present at the DALI terminals and on the DALI control line.

Device description

DALI XC_IB 3.0 | 01.2014 | en 6

3 Device description

Figure 1: DALI XC input device

(1) Terminals

(2) "Config" rotary selector switch

(3) "Mode" rotary selector switch

Device description

DALI XC_IB 3.0 | 01.2014 | en 7

3.1 Application area

The DALI XC is a device with four inputs for controlling lighting with single momentary-action switches, double

momentary-action switches and standard switches, which can be combined in some operating modes. The DALI XC

is supplied by the DALI control line. For this reason, a device that provides the voltage supply is required for use in a

lighting system (e.g. DALI PS2).

Figure 2: DALI XC in a lighting system as part of the comfortDIM system

3.2 Operating modes

The Mode rotary selector switch is used to set the operating mode. Every letter A–G on the Mode rotary selector

switch stands for an operating mode specified on the device. If the rotary selector switch is not turned to a marked

position, the DALI XC will not function.

"MC" operating mode

Rotary selector switch position A

Single momentary-action switches and/or double momentary-action switches and/or standard switches can be used

to recall programmed functions. The MC operating mode can only be configured using the masterCONFIGURATOR

software versions 2.10 and higher. The device does not function in MC operating mode by default.

Note

More information can be found in the masterCONFIGURATOR software user manual installed with the

software. The user manual can also be downloaded from the Tridonic website.

A DALI XC device in MC operating mode can replace the DALI MC (art. No 86458507).

"SC-A" operating mode

Rotary selector switch position B

Single momentary-action switches can be used to recall scenes. No scenes can be saved in this operating mode.

A DALI XC device in SC-A operating mode can replace the DALI SC-A (art. No 24138906).

Device description

DALI XC_IB 3.0 | 01.2014 | en 8

"SC" operating mode

Rotary selector switch position C

Single momentary-action switches can be used to recall and save scenes.

A DALI XC device in SC operating mode can replace the DALI SC (art. No 24034263).

"GC-A" operating mode

Rotary selector switch position D

Single momentary-action switches and/or double momentary-action switches can be used to switch luminaire groups

on/off and brighten or dim them. Programming mode cannot be enabled in the operating mode. If the lighting system

is switched to programming mode using another DALI XC device, the momentary-action switches connected to the

DALI XC in GC-A operating mode can be used to group luminaires.

A DALI XC device in GC-A operating mode can replace the DALI GC-A (art. No 24138907).

"GC" operating mode

Rotary selector switch position E

Single momentary-action switches and/or double momentary-action switches can be used to switch luminaire groups

on/off and brighten or dim them. A system extension is typically started in this operating mode. If the lighting system is

in programming mode, the momentary-action switches connected to the DALI XC in GC operating mode can be used

to group luminaires.

A DALI XC device in GC operating mode can replace the DALI GC (art. No 24033450).

"Prog" operating mode

Rotary selector switch position F

Commissioning or a system extension can be started and completed in this operating mode. The lighting system is in

programming mode while these processes are ongoing.

"TuWh" operating mode

Rotary selector switch position G

Double momentary-action switches can be used to set the intensity and colour temperature of Tunable White

luminaires.

3.3 Acoustic signals

Some actions on the DALI XC elicit a different number of high beeps. During configuration, beeping indicates that

some steps have been reached.

The DALI XC beeps three times when the voltage supply has been established.

In programming mode, the DALI XC beeps once each time a momentary-action switch is pressed.

The DALI XC beeps once, twice or three times after various configuration steps.

The DALI XC beeps once after approx. 1 s when one of the rotary selector switches is turned to a new position.

Project design

DALI XC_IB 3.0 | 01.2014 | en 9

4 Project design

The following conditions apply for the project design of a lighting system with DALI XC:

No more than 64 DALI-compatible control gear elements can be used.

No more than 16 groups can be configured.

A luminaire can be assigned to max. 16 groups.

No more than 16 scenes can be configured.

Note

The maximum number of DALI XC devices that can be used in a lighting system depends on the total

power consumption of the devices connected to the DALI control line. The power consumption of the

individual devices can be found in the associated data sheets.

The following information applies to the use of the DALI XC in the comfortDIM system.

Assigning groups to inputs (DALI XC in "GC-A" or "GC" operating mode)

Rotary selector switch position D or E

The Config rotary selector switch is used to assign different groups to input T1 and T2 and input T3 and T4.

The following table uses the rotary selector switch position to indicate which group is assigned to the inputs.

Rotary selector switch

position

Group

Input

T1 and T2

Input

T3 and T4

all

Table 2: Assigning groups to inputs (DALI XC in "GC-A" or "GC" operating mode)

Project design

DALI XC_IB 3.0 | 01.2014 | en 10

Assigning groups to inputs (DALI XC in "TuWh" operating mode)

Rotary selector switch position G

The Config rotary selector switch is used to assign a group to all inputs. The intensity of the group can be changed

with input T1 and T2 and the colour temperature of Tunable White luminaires in the group can be changed with input

T3 and T4. The following table uses the rotary selector switch position to indicate which group is assigned to the

DALI XC.

Rotary selector switch

position

Group

all

Table 3: Assigning groups (DALI XC in "TuWh" operating mode)

Indice

Altri manuali Tridonic Controllori

Tridonic

Tridonic DALI basicDIM DGC Manuale utente

Tridonic

Tridonic luxCONTROL DaLI Msensor 5DPI 14 Manuale utente

Tridonic

Tridonic DALI XC G3 CWM 30 DA2 Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente