Trinity 100 QT Manuale utente

OWNER’S MANUAL
TRINITY 100 QT STAINLESS STEEL COOLER
W/ SHELF
Model # TXK-0804
Everything in its place.®
OWNER’S MANUAL

Your TRINITY Stainless Steel Cooler should include the following parts. Please inspect box contents to
ensure you have received all components.
If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY
Customer Service: 800.985.5506 or customerservice@trinityii.com. Parts can also be requested online
via our “Contact Us” section at www.trinityii.com.
You will need a Phillips screwdriver for assembly.
PARTS LIST
TUB (1)
A
© 2017 TRINITY - 800.985.5506
1
B
SHELF (1)
C
LEG (4)
D
SMALL
SCREW (10)
E
HANDLE (2)
F
LARGE
SCREW (12)
G
CAP CATCHER (1)
H
BOTTLE
OPENER (1)
I J
DRAIN PLUG (1)
K
LOCKING
CASTER (2)
L
NON-LOCKING
CASTER (2)
M
WRENCH (1)
LID (1)

ASSEMBLY INSTRUCTIONS
© 2017 TRINITY - 800.985.5506 2
Turn the TUB (A) upside down, and align
LEGS (D) with the holes on the bottom of the
TUB (A). Attach LEGS (D) with the SMALL
SCREWS (E). Make sure to tighten securely.
Align the HANDLES (F) on each side of the TUB
(A). Attach the HANDLES (F) with the LARGE
SCREWS (G). Make sure to tighten securely.
The HANDLES (F) can be attached either angled
up or down based on your preference.
STEP 1
STEP 2
F (2) G (12)
A (1)
D (4) E (8) Phillips
F
A
G
D
E
Phillips

ASSEMBLY INSTRUCTIONS
Turn the Cooler right-side up. Attach the CAP
CATCHER (H) to the TUB (A) by sliding it
downward, over the metal notch. Attach the
BOTTLE OPENER (I) to the TUB (A) using
SMALL SCREWS (E).
Align the holes in the SHELF (C) with the bottom
of the LEG (D), making sure that the SHELF Lip is
facing the TUB (A). Screw the LOCKING CASTER
(K) into the bottom of the LEG (D), securing the
SHELF (C) in between. Please make sure the
LOCKING CASTERS (K) are installed on the same
side. Screw the NON-LOCKING CASTER (L) into
the bottom of the LEG (D) securing the SHELF (C)
in-between. Repeat for the other NON-LOCKING
CASTER (L).
Tighten all CASTERS (K, L) with the provided
WRENCH (M).
Use the provided caster wrench to tighten
completely. Failure to do as instructed could
result in the caster stem breaking.
© 2017 TRINITY - 800.985.5506
3
STEP 3
STEP 4
K (2) L (2) M (1)
C (1)
Phillips
I (1) E (2)
H (1)
C
K
L
I
E
H
M

© 2017 TRINITY - 800.985.5506 4
Set LID (B) on top of TUB (A).
Clean the inside of the Cooler thoroughly
before use.
Unscrew the DRAIN PLUG (J) assembly. Insert
the DRAIN PLUG (J) through the opening in
the TUB (A) from the inside. Make sure the
rubber seal is on the inside of the TUB (A).
From the outside, slide the washer on first,
then the second washer with the chain
attached, and then screw on the nut. Be sure
not to overtighten. Once the DRAIN PLUG (J)
is in place, screw on the cap.
STEP 5
STEP 6
ASSEMBLY INSTRUCTIONS
J (1)
J
B
Inside the tub
Outside the tub
B (1)

SERVICE PARTS LIST –TXK-0804
© 2017 TRINITY - 800.985.5506
5
Part Number Description Part Number Description
1) PBR-17-002-3317 Cooler Lid 9) ZSV-99-011-3010 Non-Locking Caster
2) AMA-05-005-0150 Lid Knob 10) PBR-03-028-3116 Shelf
3) XSV-01-010-0530 Knob Screw 11) PBR-04-022-1625 Leg
4) XST-18-015-3317 Cooler Tub 12) XSV-01-010-0416 Small Screw
5) XST-02-004-0001 Bottle Opener 13) CGL-02-003-0001 Drain Plug
6) XST-02-005-0002 Cap Catcher 14) XSV-05-001-0675 Handle
7) ZSV-99-012-3010 Locking Caster 15) XSV-01-010-0615 Large Screw
8) XXX-97-002-0001 Wrench
TRINITY Customer Service provides the following replacement parts:
5
2
3
6
1
4
87
15
14
12
11
10
9
13

WARNINGS
1. Read and understand all instructions. Failure to follow all instructions may result in injury
and/or damage.
2. The warnings, cautions, and instructions discussed in this manual cannot cover all
possible conditions or situations that may occur. The user must always be aware of their
environment and ensure that they use the product in a safe and responsible manner.
3. Use the provided caster wrench to tighten completely. Failure to do as instructed could
result in the caster stem breaking thereby causing the cooler to collapse.
4. Do NOT modify the product in any way. Unauthorized modification may impair the
function and/or safety of the product, and may affect the life of the product.
5. Check for damaged parts. Before using this product, carefully check that all parts are in
good condition, and that the product will operate properly and perform its intended
function. Check for damaged parts and any other conditions that may affect the operation
of this product. Replace damaged or worn parts, and never use this product with a damaged
part.
6. Do NOT let children climb or play in the tub.
7. Do NOT overload the product.
8. Lock the casters when leaving cooler in stationary position.
9. Do NOT push cooler with cart on uneven surface. Cooler tub may detach from the cart.
Volume Capacity 25 gallons / 100 qt
Weight capacity per shelf 75 lb
Total weight capacity 275 lb
© 2017 TRINITY - 800.985.5506 6

© 2017 TRINITY - 800.985.5506
7
CARE AND MAINTENANCE
•Remember to drain remaining water and remove un-melted ice after use. Wipe dry for
storage.
•Avoid harsh, abrasive cleaners, and other corrosive chemicals.
•Do not use scouring pad for cleaning.
•Keep dry and avoid damp environments.
•Use a quality stainless steel cleaner and follow instructions that come with the cleaner.
Wipe ALONG the grain (NOT against).
•Cooler should not be left out unprotected in the elements. A protective Cooler Cover
(UBK-24-001-3519) is available as an accessory through www.trinityii.com.

Thank you for purchasing a TRINITY Stainless Steel Cooler. In order to register your product
and receive streamlined customer service, please fill out the following Product Registration
Form and (1) fax the form to 310.347.4134 (2) complete the Product Registration Form online
at www.trinityii.com or (3) scan and email the form to customerservice@trinityii.com. Include a
copy of your original receipt with your submission.
First Name: Last Name:
Address:
City: State: Zip Code:
Email Address: Phone:
Product Model #: TXK-0804 Purchase Date: / /
Location of Purchase:
Please rate the importance of each feature (1=least important; 10=most important)
Quality Price Size/Capacity Appearance Other
How did you hear about our product?
Magazine Ad Catalog Salesperson Word of Mouth
Internet Store Display Other
Marital Status: Single Married
Household Income: Below $50,000 $50,000-$150,000 $150,000+
Education: High School College Graduate School
Primary Residence: Own Rent
Comments/Suggestions:
PRODUCT REGISTRATION
© 2017 TRINITY - 800.985.5506 8

© 2017 TRINITY - 800.985.5506
9
Indice
Altri manuali Trinity Accessori


















