TriTeq MicroIQ UT Manuale utente

MODELS: UT CT ST

Station mode instructions

For Office furniture, storage cabinets, lockers, safes, vaults, secured enclosures

The factory master code is: 135243

The factory supervisor code is: 123

Getting Started

Two operating modes:

1. Station mode (repeated use with the same code)

2. Locker mode (use with a temporary code)

(green, red, yellow) indicates station mode

(green, yellow, red) indicates locker mode

Note: The is pre-programmed with a factory master code and a factory supervisor code.

Operation:

Unlock by entering a valid code. The green LED will illuminate. Turn the knob to unlock.

To lock, turn the knob to align the knob pointer with the lock icon on the keypad.

Programming Chart Symbols:

P= press program button

- Solid color indicates LED is lit

Indicates LED is flashing

- Location to point the key-fob

(Nx)

Indicates flashes N times

1,2,3,4,5 = Indicates the button number to press

Note: If there are any errors in executing the steps below or too much time

elapses between the steps, (3x) and the lock will exit the programming mode.

The operating mode is specified at the time of order.To determine the lock`s operating mode, remove the

battery, press and release the program button, and reinsert the battery.

Green

Proceed

LED

Red

Error

LED

Yellow

Low battery

LED

Knob

in locked

position

Location to

point the

key-fob

Battery

holder

with cover

Keypad

Program

button

Push thin

front edge

inward

Press

Here

Knob:

Moves the lock mechanism from

the locked and unlocked states.

Multiple levels of access:

1.Master code and/or blue control key fob

2.Supervisor code and/or black key fob

3.User code and/or black key fob

Program button:

Initiates the programming mode.

When pressed the green LED will illuminate.

Infrared Receiver:

Receives a signal from an electronic

TriTeq key-fob when it is pointed at the

receiver located behind the program button.

Station Mode Programming Instructions:

Result: Factory master code 135243 was erased and the new master code 112233 was accepted

CHANGE THE MASTER CODE (6 DIGITS) USING THE FACTORY MASTER CODE

factory master code factory master code new master code (2x)

135243 135243 112233 112233

Example:

ADD A USER CODE (3-6 DIGITS) USING THE SUPERVISOR CODE

Example:

Result: Supervisor code 4321 was used to add user code 54321

supervisor code user code (6x)

(6x)

4321 54321

CHANGE THE SUPERVISOR CODE (3-6 DIGITS) USING THE FACTORY SUPERVISOR CODE

Example:

Result: Supervisor code 123 was erased and supervisor code 4321 was added

factory supervisor code (6x)

(6x)

4321123

new supervisor code

CHANGE THE MASTER CODE (6 DIGITS)

Example:

Result: Old master code 112233 was erased and the new master code 123455 was accepted

old master code old master code new master code (2x)

112233 112233 123455 123455

CHANGE THE SUPERVISOR CODE (3-6 DIGITS) USING THE CURRENT SUPERVISOR CODE

Example:

Result: Supervisor code 4321 was erased and supervisor code 111555 was added

old supervisor code new supervisor code (6x)

(6x)

1115554321

ADD A CONTROL FOB

123455

Example: (6x)

Result: Master code 123455 was used to add a control fob

point blue control fob at and press the fob button (6x)master code

CHANGE THE SUPERVISOR CODE (3-6 DIGITS) USING THE CONTROL FOB

Example:

Result: the control fob was used to add the supervisor code 543

supervisor code (6x)

(6x)

543

point blue control fob at and press the fob button

CHANGE THE SUPERVISOR CODE (3-6 DIGITS) USING THE MASTER CODE

Example:

Result: Master code 123455 was used to change the supervisor code to 531

master code new supervisor code (6x)

(6x)

531123455

ADD A SUPERVISOR FOB USING THE MASTER CODE

123455

Example: (6x)

Result: Master code 123455 was used to add a supervisor fob

point black supervisor fob at and press the fob button (6x)master code

ADD A SUPERVISOR FOB USING THE CONTROL FOB

Example: (6x)

Result: A control fob was used to add a supervisor fob

point blue control fob at and press the fob button

(6x)

point black supervisor fob

and press the fob button

TO UNLOCK WITH A FOB

Example:

Result: A fob was used to unlock the lock

Point a valid fob or at and press the fob button turn the knob to unlock the lock

ADD A USER FOB USING THE SUPERVISOR FOB

Example:

Result: Supervisor fob was used to add a user fob

point black supervisor fob at and press the fob button

(6x)

point black user fob

and press the fob button

(6x)

ADD A USER FOB USING THE SUPERVISOR CODE

543

Example:

Result: Supervisor code 543 was used to add a user fob

point black user fob at and press the fob button (6x)supervisor code

(6x)

REMOVE THE USER CODE AND USER FOB USING THE CONTROL FOB

11111

Example: (6x)

Result: Control fob was used to remove to remove the user code and user fob

point blue control fob at and press the fob button (6x)

1 1 1 1 1

321

Example: (6x)

Result: User code 321 was added using the control fob

point blue control fob at and press the fob button (6x)new user code

ADD A USER CODE (3-6 DIGITS) USING USING THE CONTROL FOB

Lockout

Double digit codes:

To watch the programming videos for the station mode please visit: http://microiqlock.com/station_mode

or the locker mode video instructions please visit: http://microiqlock.com/locker_mode

Switching Modes

Note: The master code is retained when switching modes.

2. Remove the battery for 10 seconds

4. Release the program button

5. Enter the 6 digit master code. When the master code is entered correctly,

the yellow LED will illuminate

6. Press button number 2for LOCKER MODE, Press button number 1for STATION MODE

7. Once the lock switches modes, the LED’s will flash in a specific sequence for each mode:

8. Proceed to operate the lock in the selected mode

b) Locker Mode:

Station Mode:

1. Unlock the and turn the knob to the unlocked position

3. While holding the program button , reinsert the battery and wait until all 3 LED’s

fade in and fade out simultaneously

After 10 consecutive incorrect unlocking attempts, the lock will enter in a “Lockout mode” for two minutes.

While in lockout mode, the operation is temporarily disabled. Each key press will trigger the red LED and the

alert will sound three times. Two minutes after the last key was pressed, the lock will return to normal state and

can be used as intended.

The numbers 6, 7, 8, and 9 can be entered by pressing two keys simultaneously in order to produce a sum.

For example 2 and 4 can be pressed simultaneously to produce the number 6 (2+4=6).

Note: if the code was programmed using 2+4 as the 6 digit, the 2+4 must be used when accessing the lock, because

other combinations that equal six such as 1+5 are distinguished from 2+4.

REMOVE THE USER CODE AND USER FOB USING THE SUPERVISOR FOB

11111

Example: (6x)

Result: Control fob was used to remove to remove the user code and user fob

point black supervisor fob at and press the fob button (6x)

1 1 1 1 1

REMOVE THE USER CODE AND USER FOB USING THE SUPERVISOR CODE

11111543

Example: (6x)

Result: Supervisor code 543 was used to remove to remove the user code and user fob

supervisor code (6x)

1 1 1 1 1

01-00003

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali TriTeq Serratura

TriTeq

TriTeq MicroIQ UM Manuale utente

TriTeq

TriTeq MicroIQ UM Manuale utente

TriTeq

TriTeq MicroIQ Manuale utente

TriTeq

TriTeq FreshIQ 2200 Series Manuale utente

TriTeq

TriTeq MicroIQ UT Manuale utente

Manuali Serratura popolari di altre marche

Magic

Magic 105 Manuale utente

Gantner

Gantner GAT NET.Lock 7020 System Guida rapida

Wittkopp

Wittkopp Insys 7202 Manuale utente

Dorma

Dorma Studio Classic Manuale utente

Securam

Securam ECSL-601 Manuale utente

Sudhaus

Sudhaus 3003 Manuale utente

Safety 1st

Safety 1st 48517 Manuale utente

Pado

Pado FDS-10 Manuale utente

Esco

Esco systeQ Series Manuale utente

COMPX

COMPX National D8951 Manuale utente

secureo

secureo Key Box Manuale utente

Stock Loks

Stock Loks C8713 Manuale utente

COMPX

COMPX 1T-058 Manuale del proprietario

Auslock

Auslock T11 Manuale utente

ELCOM

ELCOM 7205 Manuale utente

Stealth SAFES

Stealth SAFES ShadowVault Manuale utente

Knox

Knox KeySecure 5 Manuale utente

Kwikset

Kwikset 48334/01 Manuale utente