Doc. No. TZ3200C_MN_Ver1.0 Rev 0 7 / 22
TZ3200C ADSL Ethernet Modem User’s Manual
Ventilation Warning
When you install the product, choose a well ventilated place in order to prevent
product failure or misoperation due to overheating and dust causing data loss,
product failure and human injury.
Electromagnetic Wave Warning
Electromagnetic wave has an adverse effect on the product/cable and causes
abnormal operation by disorganizing the signal system. Therefore do not install or
operate this product in a place where electromagnetic wave is present.
Lightning Warning
Lightning may bring about serious failures like product breakdown. In order to
prevent damage from lightning, ensure that the place of installation and the
connected cables are not susceptible to lightning. Installation of a surge suppressor
system will minimize any danger of a lightning strike.
Lightning Activity Warning
Do not work on, connect or disconnect this product and cables during periods of
lightning activity or when lightning is forecast.
Ground Connected Cable Warning
For all cables connected to the product, use ground connected cable to prevent or
minimize problems from surge. Also do not touch any uninsulated part of cables
disconnected from the product.
Recommended Installation Range Warning
In order to prevent falling off in performance caused by signal reduction, do not
exceed the recommended installation range.
Overheating Warning
Unless you secure enough space around the device when installing it, heat coming
out from other peripheral equipment affects the product and overheating can cause
product failure or misoperation. Therefore always secure enough space around the
place of installation to ensure that this does not happen. In order to prevent
overheating of this unit, do not operate this product in an area where the
temperature is 45℃(113℉) or above.
Working Space Warning
For easy maintenance and repair in case of problems , ensure that there is enough
working space around the product. This helps to prevent overheating.
