Trox Technik EASYLAB BE-LCD-01 Scheda tecnica

BE-LCD-01 Operatin and Installation Manual / Leaflet no. M375EV8 (01/2015)

The art of handling airThe art of handling air

Operating and Installation Manual

EASYLAB Control panel

BE-LCD-01

for fume cupboard control and room control

BE-LCD-01 Operatin and Installation Manual / Leaflet no. M375EV8 (01/2015)2

1 General information __________________ 3

Other applicable documentation ________ 3

Symbols used in this manual ____________ 3

2 Safety and correct use ________________ 4

General information re ardin safety ______ 4

General safety measures ______________ 4

Correct use ________________________ 4

Incorrect use ________________________ 4

Residual risks ______________________ 4

3 Product description __________________ 5

Product overview and dimensions ________ 5

Functional description and technical data __ 6

4 Transport, stora e and packa in ________ 7

5 Operation · Fume cupboard control ______ 7

Fume cupboard control ________________ 7

Basic functions ______________________ 8

Additional functions __________________ 9

Operatin mode default settin __________ 9

Automatic sash device ________________ 10

Fume cupboard li htin ________________ 10

Overridin operatin mode defaults set

by the central BMS____________________ 10

Operatin states, alarm messa es,

fault displays ________________________ 11

5 Operation · Room control ______________ 14

Room control ________________________ 14

Basic functions ______________________ 15

Additional functions __________________ 16

Operatin mode default settin __________ 16

Overridin operatin mode defaults set

by the central BMS____________________ 17

Operatin states, alarm messa es,

fault displays ________________________ 18

Mountin __________________________ 21

6 Installation and electrical wirin __________ 21

Mountin on an adapter ________________ 22

Wall installation usin a junction box ______ 22

Installation to a wall or to furniture ________ 23

7 Commissionin ______________________ 24

8 Maintenance ________________________ 24

Contents

TROX GmbH

Heinrich-Trox-Platz

D-47504 Neukirchen-Vluyn

Phone +49 (0) 28 45 20 20

Fax +49 (0) 28 45 20 22 65

E-Mail tro[email protected]

www.troxtechnik.com Subject to chan e / All ri hts reserved © TROX GmbH

BE-LCD-01 Operatin and Installation Manual / Leaflet no. M375EV8 (01/2015) 3

Danger!

Desi nates dan er to life and limb due to

electrical volta e.

Warning!

Desi nates dan er to life and limb.

Important!

Desi nates dan er that can cause minor

personal injury or dama e to property.

Symbols used in this manual

This operatin manual describes the EASYLAB

BE-LCD-01 control panel for fume cupboard control

and room control.

To ensure complete functionin of the control panel

it is essential to read this operatin and installation

manual before startin any work, and to comply

with it. The manual must be iven to the facilities

mana er when handin over the system. The

facilities mana er must include the manual with

the system documentation.

The manufacturer does not accept any liability

for any malfunction or dama e resultin from

non-compliance with these instructions or non-

compliance with relevant statutory re ulations.

Other applicable documentation

In addition to this manual, the followin documents

apply:

• Control Systems catalo ue

– EASYLAB BE-LCD-01 control panel

– EASYLAB TCU3 controller

– EASYLAB TAM adapter module

• EASYLAB Confi uration Software Operatin

Manual (M375EV1)

• Project-specific wirin documents

1 General information

General information regarding safety

Only skilled qualified personnel are allowed to

perform the described work on the control panel.

Only skilled qualified electricians are allowed to

work on the electrical system.

For all work performed on EASYLAB components,

the followin re ulations and uidelines must be

complied with. This applies in particular to the

followin German country specific re ulations or

as appropriate in the country where the installation

is takin place:

• Equipment and Product Safety Laws (GPSG)

• Industrial Health and Safety Re ulations

(BetrSichV)

• Accident Prevention Re ulations (BGV A1,

BGV A3)

General safety measures

• Large temperature differences

Condensation can dama e the electronics

beyond repair. If the control panel has been

kept in an unheated area, wait at least two

hours before switchin on the supply volta e

for commissionin .

• Electrostatic charge

Electrostatic char e can dama e the electronics.

To avoid this, first touch an equipotentially

bonded metal surface, e. . a water pipe, for

electrical earthin before you remove the control

panel from its protective wrappin .

• Fixing the base plate and the adapter

Ti hten the screws only hand-ti ht in order to not

dama e the base plate or the adapter.

• Foreign matter and liquids

If liquid ets inside the control panel, let

the control panel completely dry before

commissionin . Remove forei n matter, if any.

If the device emits a smell or smoke, have it

checked by the manufacturer.

4 BE-LCD-01 Operatin and Installation Manual / Leaflet no. M375EV8 (01/2015)

2 Safety and correct use

Correct use

The BE-LCD-01 control panel is an EASYLAB

component intended for the display of values and

for performin various functions. If the control panel

is connected to a fume cupboard controller, the

function display complies with EN 14175; operatin

functions and special functions can be set by

the user. If a room is equipped with EASYLAB

controllers, the control panel is intended for

monitorin and for operatin mode default settin .

• Connect the control panel to an EASYLAB TCU3

used for fume cupboard control (equipment

function FH-xxx).

• Connect the control panel to a EASYLAB TCU3

controller used for extract air control (equipment

function RE), supply air control (equipment

function RS), or room pressure control

(equipment function PC).

• Connect the control panel to an EASYLAB TAM

adapter module with active room mana ement

function (RMF).

• Surface mount the control panel onto the side

frame of the fume cupboard.

• As an alternative, mount the control panel to a

wall, with our without junction box.

• Observe the technical data for the control panel.

Incorrect use

Do not use the control panel outdoors, in wet areas,

or in potentially explosive atmospheres.

Residual ris s

A failure of the supply volta e is indicated on the

control panel only if the EASYLAB controller is

equipped with the EM-TRF-USV expansion module

and the battery pack has been connected and fully

char ed.

Product overview

















5BE-LCD-01 Operatin and Installation Manual / Leaflet no. M375EV8 (01/2015)

Product overview and dimensions

Dimensions

 40-character display

 Alarm sounder

 Sash monitorin warnin display

 Status display ( reen, yellow, red)

with text HIGH and LOW

 Connection socket for service and

commissionin device

 Acoustic alarm acknowled ement

 Manual control

 Selection of operatin mode

 Li htin or other equipment (RMF)

 Automatic sash device (FH),

sun protection, e. . blinds (RMF)

 Connection socket for EASYLAB

controller (on rear)

Front view BE-LCD-01

with adapter BE-LCD-01

without adapter

111

15°

≈60

145

3 Product description









6 BE-LCD-01 Operatin and Installation Manual / Leaflet no. M375EV8 (01/2015)

Technical data

Supply voltage 24 V AC/DC from TCU3 controller or TAM adapter module

Connecting cable Approx. 5 m standard network patch cable, SF-UTP, extendable to 40 m

Acceptable temperature range for stora e: -10°C to +70 °C

for operation: 0°C to +50 °C

Acceptable humidity for storage and

operation <90% non-condensin

Protection level IP20

Dimensions 145 × 111 × 23 mm

Structural depth Approx. 60 mm when the adapter is used

28 mm when mounted to a wall or to furniture

Casing ABS plastic, pearl li ht rey (RAL 9022); front plastic: anthracite rey

(RAL 7016)

Functional description

The BE-LCD-01 control panel is used to display

and control the most critical aerodynamic functions

of a fume cupboard or a room. Users obtain

information re ardin the condition of the fume

cupboard or room and can select amon various

operatin modes. The individual display elements

and controls are as follows:

• Three-colour status display

• Warnin display

• 40-character display

• Alarm sounder

• Ei ht function button fields

– Acoustic alarm acknowled ement

– Three operatin mode buttons

– Two buttons for the automatic sash device or

sun protection (dependin on application)

– One button for the fume cupboard li htin

– One button for manual control

• Service socket

The ran e of functions of the control panel can be

adapted to project-specific requirements usin the

EasyConnect confi uration software. The ran e of

functions may vary for different fume cupboards or

rooms.

The function button fields are used for display and

as buttons for operation.

The available functions are hi hli hted (blue).

The required function can be selected by pressin

the appropriate button.

• Selection of the operatin mode

• Automatic sash device

• Control of the fume cupboard li htin

The 40-character display shows system messa es

or, if enabled, current values.

The control panel is connected to the EASYLAB

controller usin a plu -in connection cable.

The control panel consists of a front panel with the

display elements and controls, the electronics, and

the plu able adapter that provides four different

viewin an les. The control panel can be mounted

onto the side frame of a fume cupboard (usin the

adapter) or to a wall or furniture.

The control panel is part of the EASYLAB system.

The functions described in this manual are only

available with the correspondin controllers and

possibly additional components.

Detailed information on desi n and areas of

application can be found on our website and in

the LABCONTROL desi n manual.

Functional description and technical data

3 Product description

Fume cupboard control

BE-LCD-01

TCU3

The BE-LCD-01 control panel is used to

display and control the most critical aerodynamic

functions of a fume cupboard controlled by an

EASYLAB TCU3 fume cupboard controller.

The ran e of functions can be confi ured

individually. The control panel has ei ht

function button fields that are visible or

not visible accordin to the confi uration.

• Available function: blue symbol

• Active function: white symbol

The basic functions are available for all fume

cupboards. Other functions may be available

dependin on the confi uration and operatin

state.

7BE-LCD-01 Operatin and Installation Manual / Leaflet no. M375EV8 (01/2015)

Delivery chec

Check delivered items immediately after arrival for

transport dama e and completeness. In case of any

dama e or an incomplete shipment, inform the

shippin company and your TROX contact person

immediately.

A complete shipment includes:

• BE-LCD-01 control panel with adapter

• Connectin cable, approx. 5 m, patch cable, blue

• Operatin and installation manual

Transport on site

• If possible, take the control panel in the transport

packa in up to the installation location.

• Do not remove the protective wrappin until just

before installation.

Storage

If you need to store the control panel temporarily,

make sure that the followin conditions apply:

• Leave the unit in its packa in and do not expose

it to the effects of weather.

• Store the unit in a dry place and away from direct

sunli ht.

• Temperature: –10°C to +70°C

Maximum humidity: 90% (non-condensin )

Pac aging

Properly dispose of packa in material.

Fume cupboard control

The BE-LCD-01 control panel fulfils the

requirements of EN 14175 for fume cupboard

operation and status displays.

It can be used to control an automatic sash

device as well as fume cupboard li htin . It works

in combination with the ‘fume cupboard control

equipment function of the TCU3 EASYLAB

controller and displays re ular operatin states

and values.

4 Transport, storage and pac aging

5 Operation · Fume cupboard control

8 BE-LCD-01 Operatin and Installation Manual / Leaflet no. M375EV8 (01/2015)

Acoustic alarm ac nowledgement

This button is used to acknowled e and

reset an acoustic alarm.

Warning display for sash opening

• Permanent li ht

Maximum operational sash openin has been

exceeded. At the same time, an

acoustic alarm may sound

(dependin on the controller

confi uration). The permanent li ht

is reset by closin the sash.

• Blinkin li ht

The fume cupboard is affected by diversity

control. The volume flow rate has been reduced

to prevent the total room extract air

from exceedin the set value.

Close the sash.

40-character status display

Text display of

fume cupboard

operatin states

and faults. Display

texts → p. 11

onwards

The display of

additional

information can be confi ured.

• Volume flow rate setpoint and actual values

• Face velocity actual value

(only for fume cupboard controllers with

face velocity transducer FH-VS)

• Display text lan ua e

• Unit of measure for volume flow rate setpoint and

actual values

The display can be adjusted usin the confi uration

software.

5 Operation · Fume cupboard control

Basic functions

Three-colour status display

Green, yellow, red combined with text LOW and

HIGH

• Green

Normal operation, fume cupboard functionally

reliable

• Yellow

Volume flow rate too hi h; fume cupboard is

functionally reliable, increased ener y

consumption

• Red

Volume flow rate too low; fume cupboard not

functionally reliable, work at the fume cupboard is

not allowed

Green Yellow Red

Operating mode default setting

In standard mode all function button fields for all

available functions are indicated as blue symbols

(i.e. not active). Activate the special operatin

modes usin the followin buttons:

Activate increased operation

Pressin this button activates the increased volume

flow rate set for the controller (e. . for

emer ency operatin mode). The

symbol colour chan es to white.

Activate reduced operation

Pressin this button activates the reduced volume

flow rate set for the controller (e. . for ni ht

setback). The symbol colour chan es

to white.

Shut-off

Pressin this key activates shut-off.

The symbol colour chan es to white.

Deactivating special operating

modes

Pressin the respective button deactivates the

special operatin mode. To select a new operatin

mode without first deactivatin the previous function

just press the correspondin function button.

Increased operation can be set for a limited

period of time. The increased volume flow will then

automatically be deactivated after the set delay.

Additional functions

Dependin on the confi uration and operatin

mode default settin additional displays and

function buttons may be available.

Available function buttons are visible (hi hli hted

in blue or white). Function buttons that are not

available are not visible.

Examples

White symbol

The function is active. Pressin the button a ain

deactivates the function.

Blue symbol

This function is available but not active.

Pressin the button activates the

function.

Non-visible (grey) symbol

The function is not available. This depends on the

confi uration of the controller or on the

current operatin state.

White symbol blin s

Increased operation

OPEN mode (special operatin mode) is active.

White symbol -

blin s after button has been

pressed

If you press a function button field and the white

symbol blinks briefly, the selected function cannot

be deactivated at the moment. The cur-

rent operatin mode default settin is of

hi her priority and cannot be overrid-

den on the fume cupboard.

9BE-LCD-01 Operatin and Installation Manual / Leaflet no. M375EV8 (01/2015)

5 Operation · Fume cupboard control

BE-LCD-01 Operatin and Installation Manual / Leaflet no. M375EV8 (01/2015)10

Overriding operating mode defaults set

by the central BMS

Operatin mode default settin s from the central

BMS or from the room control panel can be

overridden on the control panel for the fume

cupboard controller.

Temporary override

A centrally set operatin mode can be temporarily

overridden at any time usin the operatin mode

button on the control panel. The operatin mode

selected on the control panel remains active until

the central BMS sets another operatin mode. If the

central BMS sets a different default operatin

mode, it overrides the locally activated operatin

mode.

Manual control for permanent override

A centrally set operatin mode can be

permanently overridden on the control

panel. To do so, first activate manual

control by pressin the correspondin

button to prevent further overrides from

the central BMS. Then set any other operatin

mode on the control panel.

This operatin mode default settin can be

terminated by pressin the manual control button

a ain. The fume cupboard controller then resumes

the previous operatin mode from the central BMS.

Manual operation can be set for a limited period of

time. The manual mode will then automatically be

deactivated after the set delay and the previous

operatin mode will be resumed.

No override option

The central BMS can suppress overrides from the

control panel temporarily or permanently. In this

case, manual control cannot be used, and the

control panel shows only the centrally set operatin

mode. If a user attempts to chan e the operatin

mode on the control panel, the active operatin

mode will blink briefly.

Automatic sash device

These buttons are used to control the automatic

sash device.

The buttons can be used only if an automatic sash

device has been confi ured.

Open the sash

Close the sash.

Fume cupboard lighting

This button is used to control the fume

cupboard li htin .

The button can be used only if this

function has been confi ured.

5 Operation · Fume cupboard control

Indice

Altri manuali Trox Technik Pannello di controllo

Trox Technik

Trox Technik EASYLAB Manuale utente

Manuali Pannello di controllo popolari di altre marche

RDZ

RDZ PC-HRX Manuale utente

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manuale tecnico

Efka

Efka Variocontrol V810 Manuale utente

Cebora

Cebora 208-10 Manuale utente

AMX

AMX AutoPatch CP-15 Manuale utente

Satel

Satel CA-6 KLED-S Manuale utente

Evolution

Evolution IQ plus 800 Manuale utente

Fagor

Fagor 8040 TCO CNC Manuale utente

Trane

Trane ComfortLink II XL950 Control Manuale utente

AKO

AKO PROCool AKO-17635-2 Manuale utente

ABB

ABB 6136/30M-101 Manuale utente

Telikou

Telikou BK-603 Belt Pack Manuale utente

Mapei

Mapei Mapeheat Thermo Touch Manuale utente

Bosch

Bosch D9412GV4 Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manuale utente

Sminn

Sminn BOX L VF1L EI Manuale utente

Balboa

Balboa TP600 Manuale utente

Nice

Nice HSCU1 Specifiche tecniche