Trueshopping 62cc Istruzioni per l'installazione e il funzionamento
Long Reach Petrol Pruner
Assembly / Owner’s Manual
©Trueshopping LTD Issue 01 mc-rt
1
Original instructions
CONTENTS
Model coverage 3
Safety instructions a,b,4
Protecting yourself 4
Fuelling 4
Vibrations 4
Protecting others 4
Protecting the machine 5
Minimum age 5
Recommended use 5
Emergency action 5
Safe operating instructions 5
What’s in the box? 6
Contents 6
Assembling the unit 6
Pruning saw 7
Pole attachment 7
Mounting the guide rail and chain 8
Tensioning the chain 9
Filling with oil 9
Shoulder harness assembly 10
Fuelling the machine 10
Starting the machine 10
Operation advice 11
Storage instructions 12
Guide rail maintenance 12
Fuel pipe / tank grommet exchange 12
Fuel filter exchange 15
Changing / checking the sparkplug 17
Air filter cleaning / exchange 18
Carburettor exchange / inspection 19
Online help 21
Troubleshooting 22
Specifications 22
Contact us 23
THIS GUIDE COVERS THE FOLLOWING
MODEL NUMBERS –
MFS260C / MFS260CO
MFS330C / MFS330CO
MFS430C / MFS430CO
MFS520C / MFS520CO
MFS550C / MFS550CO
MFS580C / MFS580CO
MFS620C / MFS620CO
MFS650C / MFS650CO
MFS680C / MFS680CO
*While every effort is made to ensure the
accuracy ofthe information in this
manual,occasionally minor design
changes can occur,if indoubt please visit
the manufacturers website for the most
up to date version of this guide.
3
Labels on the Machine and their Meanings
IMPORTANT SAFETY INFORMATION
•Please note that the cutting blade
continues to run for a short period
after you let go of the throttle trigger
–This is called the flywheel effect.
•Do not lend or rent your power tool
without the instruction manual. Be
sure that anyone using your power
tool understands the information
contained in this manual.
•Persons with pacemakers only: The
ignition system of your power tool
produces an electromagnetic field of a
very low intensity. This field may
interfere with some pacemakers.
Consult your doctor if you have
concerns.
•Do not use a pressure washer to clean
your power tool. The solid jet of water
may damage parts of the power tool.
•Do not spray the machine with water.
•Work calmly and carefully – in
daylight conditions and only when
visibility is good. Stay alert so as not
to endanger others.
•Your power tool produces toxic
exhaust fumes as soon as the engine
is running. These fumes may be
CAUTION! HOT EXHAUST
DO NOT USE NEAR
NAKED FLAMES
Machine Noise
information
Model information
(Differs by model)
a.
Important information
Important information
colourless and odourless and contain
unburned hydrocarbons and benzoyl.
Never run the engine indoors or in
poorly ventilated locations.
•The dusts, vapour and smoke
produced during operation may be
dangerous to health. If the work area
is very dusty or smoky, wear
appropriate safety equipment.
•If your power tool is subjected to
unusually high loads for which it was
not designed (e.g. heavy impact or a
fall), always check that it is in good
condition before continuing work
b.
Safety Instructions
Read this manual in full before operating this
machine for the first time. If you have any
questions regarding the operation of the
machine, please contact the manufacturer.
CAUTION! In order toensure your safety you
must follow the safety, installation and
operation instructions. Any person who uses
this machine should be fully aware of the
potential risks.
!You must be 18orover to operate this
machine. Children must notoperate this
machine.
! The manufacturer shall not be held liable if
the unit is altered outside of the information
printed in this guide.
! Always turn the engine off before
performing any maintenance
! Some components will become hot during
use
Protecting yourself
!Do not use this machine in areas with poor
ventilation or indoors, when switched on, the
machine produces carbon monoxide!
! Do not operate this machine in adverse
weather or in situations where sure footing is
not guaranteed.
! Exercise common sense when operating this
machine, do not operate when under the
influence of alcohol or medication which may
impair judgement and concentration.
FUELLING
! Always switch the engine off before fuelling.
Open the tank cap slowly to avoid spillage due
to internal pressure. If the unit has recently
been in use, allow to cool down first. Not
allowing the unit to cool could cause the fuel to
ignite.
When replacing the fuel, be careful not to over
fill the tank. Any spillages should be cleaned up
immediately.
After filling ensure that the cap is secured
properly and that it will not work loose while
the machine is switched on.
VIBRATIONS
Vibrations from the machine make it difficult to
hold for long periods of time, this time can be
prolonged by wearing suitable gloves.
Protecting others
! Do notallow anyone toapproach the
machine while in use, ensure the working
area isclear.
! Avoid jamming the blade as this can make
the machine suddenly difficult to control.
! Do not use the machine for any purposes
other than outlined in this book.
! WEAR EAR PROTECTION!
! SAFETY BOOTS MUST BE WORN
WHILE OPERATING THE MACHINE!
! WEAR SUITABLE EYE
PROTECTION!
! WARNING, PETROL IS
FLAMMABLE, TAKE
APPROPRIATE CARE!
4
!Itis good practise to clearly mark your
working area.
! Turn the machine off when moving location.
Protecting the Machine
! Only use recommended parts, consult the
manufacturer to obtain these.
!Always use the correct tool for the
correct job.
! Ensure that the machine is stored in a dry
area in a secure place. Parts of the tool are
sharp and should not be left within reach of
children / pets.
! Inspect the machine for damage before use,
and ensure all components are properly
aligned.
Minimum Age
Only persons over 18 years of age are legally
allowed to operate this machine unless under
training supervision.
Recommended use
The unit is recommended for general use in
agriculture, forestry and gardening.
Emergency Action
In the event ofinjury, seek qualified medical
assistance.
!The user isresponsible for any material /
personal damage resulting from improper use.
! Please note that if not properly used, the
following injuries can be caused –
Hearing problems if proper ear protection
not used.
Carbon monoxide poisoning if used in an
enclosed area.
Safe Operating Instructions
! Do not operate the machine if you suspect
the machine has a problem.
•Always visually inspect to see that the
chain and cutter assembly are not
worn or damaged. Ensure the engine
vents are free from any dirt or
remnants.
•Operate the machine at the lowest
possible engine speed to do the job.
•Keep your hands and feet clear of the
attached tool when the machine is
running.
•Keep both hands firmly on the machine
at all times.
•Always use the machine with the
supplied carry strap.
•Always wear appropriate hand, feet
and hearing / eye protection when
operating the machine.
•Pay attention, the machine will
continue to run for five seconds after
the engine has stopped.
5
What’s in the Box?
This long reach pruner is ideal for an array of
tree maintenance tasks including trimming tall
or wide hedges and small leafed trees. It has a
powerful two stroke engine for exceptional
performance. Its long reach pole allows for the
trimming of hard to reach branches without the
need for stepladders or extra physical exertion.
Contents
•Main engine with attached handle
•Tools
•Extension handle
•Handle
•Pruner
•Carry strap
•Mixing bottle
Assembling the unit
1. Handle
2. Harness loop hole
3. Stop switch
4. Throttle lockout
5. Air filter
6. Starter handle
7. Fuel tank
8. Throttle trigger
9. Shoulder harness
10. Attachment bracket
11. Locking switch
1. Fuel cap
2. Choke lever: Facilitates the engine
starting
3. Fuel pump
4. Screw on the carburettor
5. Engine support
6. Fuel tank
7. Exhaust
6
1. Chain
2. Guide rail
3. Oil tank
4. Oil tank lid
5. Drive shaft
6. Chain wheel housing
7. Hook
8. Chain guard
9. Sprocket
10. Chain tensioner
Pruning saw
! If you require the useofthe extension pole
then attach it first in the same way asthe
following.
!When you are ready to assemble / use the
product, remove the protective cover from
the saw. Take care asthe chain is very sharp.
!Ensure the engine is switched off before
using the saw.
Pole Attachment
To fit the different attachments to the
machine, you need toconnect them tothe
coupling on the end ofthe fixed engine pole.
1. Open the coupling and turn the retaining
handle to loosen the connection.
2. Line up the hole on the required tool
pole as shown below and push firmly
into the coupling.
3. Close the coupling again, tighten the
retaining handle, and pull and twist
the pole to ensure that it is secure.
7
Mounting the guide rail and chain
•Loosen the nut and remove the
chain guard.
•Tighten the adjuster with a
screwdriver so that it is all the way
to the right (circled) then sit the
bar in position.
•Put the chain in place and start
from the top end of the rail,
ensuring that the chain teeth go
around the bar as pictured.
•Place the plastic cover onto the
assembly and loosely screw the nut
on. (DO NOT TIGHTEN)
8
Indice
Lingue:
