1.2Before use
1.2.1 Buttons
On/Off button: in the shutdown mode, short press this button to perform
power on operation; in the power on mode, short press this
button to let the machine be in the sleep mode; long press this
button to enter the mode switch dialogue interface, where you
can select shutdown option to shut off the machine.
Menu button: press this button to a pop-up menu of the program in the
current interface.
Back button: press this button to back to the last interface. Repeatedly press the
back button can exit the program and return to the main interface.
Reset button:
Main interface button: short press this button to quickly return to the system's
main interface and long press to recall
the last running program for quick access.
Tip: During using, if you do not know how to operate, press the "menu
Button" or "back button" will definitely help
1.2.2 Batteries
This machine uses 4500mAh polymer battery. During the charging the
following matters should be paid attention to:
1. The charging voltage of the machine is 5.0V. Please confirm before use to
avoid damage to the machine and other dangers;
2. If the battery is too low, the machine will automatically shut down. Please
charge the battery. The machine can be charged in both the power on or
power off mode;
3. When the machine is being charged in the power on mode, the battery icon
in the task bar will display the charge mode;
4.When the charging is completed, please pull out the plug and unplug the
charger from the power outlet;
Charging time: it needs 4.5 hours to charge with standard charger in the
shutdown mode. If charging in the power on mode, due to the simultaneous
consumption of electricity, it needs more time to fully charge the battery.
Using time: 3-4 hours' continuous use (the specific using time depends on the
using function and machine settings).
1.2.3 MICRO SD card
This machine supports 32GB or lower MICRO SD card. Because some applications
require the support of SD card, it is suggested to configure with a SD card.
Tip: When accessing the files in the SD card, do not pull out the card, so as to
avoid damage to the SD card. To remove the SD, please firstly uninstall the SD
card in the "Settings/SD card and mobile phone memory”
1.2.4 USIM or SIM card
When selecting 3G network services, you need to purchase a USIM/SIM card
from network providers (respectively for WCDMA or EVDO network), which
contains detailed purchasing information, such as personal identification
number (PIN) and optional services.
- 5-
Press the reset button to comeback the machine from abrormity,
and then turn on the machine via.press the power button.