Trust MD-4100 Manuale utente
MD-4100 ADSL MODEM-ROUTER
1
UK
Product information
A: Power indicator
B: LAN port 1 indicator
C: LAN port 2 indicator
D: LAN port 3 indicator
E: LAN port 4 indicator
F: ADSL data indicator
G: ADSL connection indicator
H:Modem ready indicator
I: ADSL line connection
J: Reset switch
K: LAN port 1
L: LAN port 2
M: LAN port 3
N: LAN port 4
O: Power connector
P: Power switch
F
B
C
A
H
G
E
D
J
K
L
M
N
O
I P
Connect modem
1
Connect ADSL cable to ADSL line connection ‘I’
ADSL
MD-4100 ADSL MODEM-ROUTER
2
2
Connect a splitter/filter (not included) to telephone
line
Connect modem to splitter/filter
Connect phone to splitter/filter
Splitter/filter only needed for correct phone
functionality
3
Connect power adapter to Power connector ’O’
4
Plug power adapter into the wall outlet.
5
Power on modem
POWER
MD-4100 ADSL MODEM-ROUTER
3
UK
6
Power indicator (A) will lid continuously
ADSL connection indicator flashing
7
Wait max. 5 minutes for ADSL indicator to lid
continuously. If it keeps blinking, the ADSL line is
not properly connected or the ADSL service is not
(yet) activated. Check with your internet service
provider.
8
Connect the supplied network cable to input (N~K).
9
Shut down computer
Connect the network cable to computer
Start your computer again.
_
___
- - - -
_
___
5 Min
Shutdown Connect Start
MD-4100 ADSL MODEM-ROUTER
5
UK
13
‘Automatic Setup’
14
Select your Country
If country not listed follow steps appendix C
15 Select your ISP
If ISP not listed follow steps appendix C
MD-4100 ADSL MODEM-ROUTER
6
16
Depending on ISP or setting this window
will appear. When there is no field for
username or password Æ17
1. Fill in internet account ‘username’ and 2x
‘password’
2. ‘Save Setting’ Æ18
For correct username and password check
ISP information
17
‘Save Setting’
If fixed/static IP is needed by your ISP
choose IP mode ‘static IP’ and fill in the IP
address, subnet mask and gateway
specified by your ISP.
18 Wait…
19 ‘Back To Home’ (Back to main menu)
Finish configuring modem
2
1
MD-4100 ADSL MODEM-ROUTER
7
UK
Change modem username/password
1
2
3
4
5
20
It is recommended to change the
modem username and password
This is not the username and password
from your ISP account
1. ‘Advanced Setup’
2. ‘ADMIN PRIVILEGE’
3. ‘Admin Password Configuration’
21
1. Specify current password (default:
‘epicrouter’)
2. Specify Administrator name
3. Specify New Password (2x)
4. Submit
5. Save Configuration
22 Save & Reboot
Modem Username and password are
changed.
Æ
3
2
1
MD-4100 ADSL MODEM-ROUTER
8
1
2
3
23
1. Specify new username
2. Specify new password
3. OK
You entered the modem configuration menu
again
Browse Internet
24
Open Internet Explorer
Enter a website (example) www.trust.com
Modem is working and connected to internet.
If no page appears check out appendix B
Internet Explorer settings
Notes
This modem only works on analogue (POTS, PSTN, Annex A) ADSL or DSL/TDSL line
The built in firewall is enabled by default. If you want to disable it see the English LAN manual on CD-
ROM.
Before installation make sure your ADSL line and account are activated.
This modem is not compatible with SDSL standard.
To share you files and printer between the computers connected to the modem/router see the English
LAN Manual on CD-ROM.
To play games over the LAN it must be supported by the game refer to the instructions from the game
how to configure it.
To configure the advanced router options from the modem/router see the English advanced manual on
CD-ROM.
If you have any problems, go to www.trust.com/14357 (also for UK version item no. 14358) for FAQ, firmware
and manuals.
MD-4100 ADSL MODEM-ROUTER
9
UK
Appendix A: Check network settings Windows XP
1
Set up your network card for automatic
TCP/IP address assignment:
A. Click ‘Start’.
B. Select ‘Settings’.
C. Choose ‘Network Connection’.
D. Right-click the network adapter
connected to the modem.
E. Choose ‘Properties’.
F. Click the ‘Internet Protocol’ item.
G. Click ‘Properties’.
H. Set two options to automatic.
I. Close all screens by clicking the OK
buttons. No need for restart.
J. Read the ‘Internet Explorer’ appendix
B.
2
E
D
B
Windows XP
A
C
MD-4100 ADSL MODEM-ROUTER
10
3
I
H
F
G
Appendix A: Check network settings Windows 2000
1
Set up your network card to TCP/IP address
assignment:
A) Right click ‘My Network Places’.
B) Choose ‘Properties’.
C) Right-click the network adapter
connected to the modem.
D) Choose ‘Properties’.
E) Click TCP-IP item
F) Click ‘Properties’.
G) Set two options to automatic.
H) Close all screens by clicking the OK
buttons. No need for restart.
I) Read the ‘Internet Explorer’ Appendix
B.
B
A
Windows 2000
Indice
Altri manuali Trust Modem
Trust
Trust AP115W Manuale utente
Trust
Trust 450I RJ45 Manuale utente
Trust
Trust 235A Manuale utente
Trust
Trust 56K V92 External Modem Manuale utente
Trust
Trust 56K PC-CARD MODEM Manuale utente
Trust
Trust 215A Manuale utente
Trust
Trust MD-4050 Manuale utente
Trust
Trust 56K PC-CARD MODEM Manuale utente
Trust
Trust 31065 Manuale utente
Trust
Trust 56K V92 External Modem Manuale utente
Trust
Trust MD-1100 56K V92 Manuale utente
Trust
Trust 450I Manuale utente
Trust
Trust ISDN Manuale utente
Trust
Trust MD-3100 Manuale utente
Trust
Trust 56K PC-CARD MODEM Manuale utente
Trust
Trust 12284 Manuale utente
Trust
Trust V92 Manuale utente
Trust
Trust MD-1250 56K Manuale utente
Trust
Trust Communicator 56K ESP-2 Manuale utente
Trust
Trust 245B Manuale utente
