Trust SPACECAM 150 Manuale utente

TRUST SPACEC@M 150

User’s Manual

Version 1.0

TRUST SPACEC@M 150

UK 12575 SPACEC@M 150 CD HANDLEIDING (A4)

Thank you

Thank you very much for purchasing this product from the Trust range. We wish you hours of fun

with it. Please read this manual carefully before using the product.

Registration

receive optimal guarantee and service support. You will be automatically informed of

developments to your product and of other Trust products. You will also have the chance to win

some spectacular prizes.

No part of this instruction manual may be reproduced or transmitted, in any form or by any means,

electronic or mechanical, including photocopying, recording, or information storage and retrieval

systems, for any purpose other than the purchaser's own personal use, without prior written

permission from the manufacturer.

Disclaimer statement

The manufacturer specifically disclaims all warranties, either express or implied, including, but not

limited to, implied warranties for the marketability and suitability for a particular purpose, with

respect to the software, the accompanying product manual(s) and written material, and all other

accompanying hardware. The manufacturer reserves the right to revise or make improvements to

its product at any time and without obligation to notify any person of such revisions or

improvements.

In no event shall the manufacturer be liable for any consequential or incidental damages, including

any loss of business profits or any other commercial damages, arising out of the use of its

products.

All company or product names are trademarks or registered trademarks of their respective

owners.

TRUST SPACEC@M 150

Table of contents

1. Introduction ..................................................................................................................................... 2

1.1 Conventions used in this manual........................................................................................... 2

1.2 Contents of the package.......................................................................................................... 2

1.3 Minimum system requirements .............................................................................................. 2

2. Safety................................................................................................................................................ 3

2.1 General ...................................................................................................................................... 3

3. Functions of the ‘Trust SPACEC@M 150’..................................................................................... 3

3.1 Camera functions ..................................................................................................................... 3

4. Installation Setup program............................................................................................................. 4

4.1 Windows 98 / ME ...................................................................................................................... 4

4.2 Windows 2000........................................................................................................................... 6

4.3 Mac OS 8.6 ................................................................................................................................ 7

5. Software Installation ....................................................................................................................... 8

5.1 Ulead Photo Explorer 6.0 installation..................................................................................... 8

5.2 Installation Microsoft Internet Explorer (NetMeeting) ........................................................ 10

6. Using the camera .......................................................................................................................... 11

6.1 Positioning the camera.......................................................................................................... 11

6.2 Trust SpaceC@m 150 Software ............................................................................................ 11

6.3 Using Ulead PhotoExplorer................................................................................................... 12

6.3.1 Advanced image settings ............................................................................................... 13

6.3.2 Taking a snapshot ........................................................................................................... 14

6.3.3 WebCam & Internet ......................................................................................................... 14

7. Troubleshooting............................................................................................................................ 15

8. Specifications ................................................................................................................................ 16

9. Trust Customer Care Centres ...................................................................................................... 17

TRUST SPACEC@M 150

1. Introduction

This instruction manual is intended for users of the Trust SpaceC@m 150. Prior knowledge of computers is

necessary to install this product. If you have any questions, please consult one of the Trust Customer Care

Centres. You can find more information about these Customer Care Centres on the last page of this

electronic manual, as well as at the back of the quick installation manual.

1.1 Conventions used in this manual

The following conventions have been used in this manual to indicate instructions:

<key> Here you should press a key. The name of the key is given between brackets.

‘System’ This is a specific term used in a program. These are the terms used by, for example,

Microsoft Windows 98.

[DIR] Key in the text shown in square brackets [….].

{term} The text between the parentheses {….} is the English term, e.g. {File} used in the figure

referred to.

Additional information will be shown as follows:

NOTE: If you connect the ‘Trust SPACEC@M 150’ to a USB HUB, then the USB HUB should have its

own power supply.

The examples assume that the letter “D” has been assigned to your CD-ROM drive. If your system uses a

different drive letter for your CD-ROM drive, for example “E”, you should replace “D” by “E”.

1.2 Contents of the package

Please check the contents of the package before reading the instruction manual. It should contain the

following:

•Camera

•Rubber strip for clip

•CD-ROM with setup program and applications

If anything is missing or damaged, please contact one of the Trust Care Centres. You can find more

information at the back of this instruction manual.

1.3 Minimum system requirements

•Intel Pentium 200 MMX CPU or higher

•USB port

•Windows 98 / ME / 2000 / MAC OS 8.6 or higher

•32 MB RAM (64 MB recommended)

•60 MB free Hard disk space

•4X CD-ROM player

Recommended system configuration for full operation of the programs:

•ISDN-adapter or modem

•Sound card with speakers and microphone

•Internet subscription

TRUST SPACEC@M 150

2. Safety

2.1 General

1. Do not use the device in a damp environment.

2. Do not try to repair the device yourself.

3. Under the following circumstances have the device repaired by qualified personnel:

a) The cable or plug is damaged or worn;

b) Liquid has entered the device;

c) The device has fallen and/or the casing has been damaged.

4. Position the device so that the cables cannot be damaged.

3. Functions of the ‘Trust SPACEC@M 150’

3.1 Camera functions

Figure 1: ‘Trust SPACEC@M 150’ functions

A Shutter release D Clamp

B Indicator (LED) E Notebook clip

C Focus ring

Table 1: Functions of the SPACEC@M 150

TRUST SPACEC@M 150

4. Installation Setup program

4.1 Windows 98 / ME

1. Connect the USB connection of the camera to a free USB port of your computer. Windows 98 will detect

the new hardware and request the setup program. Figure 2 will appear.

Figure 2: Installation Windows 98 / ME

2. Click on ‘Next’. Figure 3 will appear.

Figure 3: Installation setup program

3. Click on ‘Next’. Figure 4 will appear.

TRUST SPACEC@M 150

Figure 4: Installation setup program

4. Enter: D:\Driver and click on ‘Next’. Follow the direction on the screen. Figure 5 will appear after

installation.

Figure 5: Installation setup program

5. Click on ‘Finish’ to complete the installation.

6. Connect the headphones with the microphone to your sound card. To do this, see the symbols on both

plugs.

You have completed installation of the setup program. Proceed to chapter 5 for installation of the software

enclosed.

TRUST SPACEC@M 150

4.2 Windows 2000

1. Connect the USB connection of the camera to a free USB port of your computer. Windows 2000 will

detect the new hardware and request the setup program. Figure 6 will appear.

Figure 6: Windows 2000 installation

2. Click on ‘Next’. Figure 7 will appear.

Figure 7: Windows 2000 installation

3. Click on ‘Next’. Figure 8 will appear.

Figure 8: Windows 2000 installation

TRUST SPACEC@M 150

4. Select ‘Specify a location’ and click on ‘Next.’ Figure 9 will appear.

Figure 9: Windows 2000 installation

5. Enter: D:\Driver and click on ‘OK’. Follow the directions on the screen. After installation, Figure 10 will

appear.

Figure 10: Installation setup program

6. Click on ‘Finish’ to complete installation.

You have completed installation of the setup program. For the installation of the software included, proceed

with chapter 5.

4.3 Mac OS 8.6

The Trust SPACEC@M 150 is also compatible with Mac starting at Mac OS 8.6. The driver is not available

on CD-ROM but can only be downloaded from our internet page:

http://www.trust.com

TRUST SPACEC@M 150

5. Software Installation

5.1 Ulead Photo Explorer 6.0 installation

Ulead Photo Explorer 6 is an image-processing program that enables you to load and process photos you

have taken with your SPACEC@M 150 on the PC. For installation of Ulead Photo Explorer 6 follow the

instructions below.

1. Go to Start – Run and type: D: SETUP.EXE. Figure 11 will appear.

Figure 11: Ulead Photo Explorer 6.0 installation

2. Click on ‘ULEAD PHOTO EXPLORER 6.0’ to start up installation. Figure 12 will appear.

Figure 12: Ulead Photo Explorer 6.0 installation

3. Click on ‘Next’. Figure 13 will appear

Indice

Manuali Webcam popolari di altre marche

Digitus

Digitus DA-70815 Manuale utente

Logitech

Logitech C510 Manuale utente

D-Link

D-Link DCS-5025L Manuale utente

BTC

BTC PC160S Manuale utente

Philips

Philips SPC715NC Manuale utente

FS FC270S Manuale utente

Adesso

Adesso CyberTrack V10 Manuale utente

MAGINON

MAGINON M-Cam 1 Manuale utente

RoboCam

RoboCam SPARK Manuale utente

Logitech

Logitech C170 Manuale utente

Real-El

Real-El FC-225 Manuale utente

Logitech

Logitech TV Cam Manuale utente

Gigaware

Gigaware 25-1176 Manuale utente

birddog

birddog EYES P200 Manuale utente

Dicota

Dicota Contact Manuale utente

Afidus

Afidus ATL-200 Manuale utente

Connectland

Connectland CAM-CNL-C119 Manuale utente

Biamp

Biamp Neets 4K Webcam Manuale utente