Truweigh Wave WA-5000-1-BK Manuale utente
WAVE USER GUIDE
™
Thanks for purchasing the WAVE Washdown Digital Scale!
This User Guide is designed to get you up and running
quickly with your scale. Scales are precision instruments
and require proper care and skill to get the best results. If
you have questions or need support, visit us at truweigh.
com/support or scan the QR Code on the back of this
manual using your smartphone.
What’s In The Box
Things To Avoid
This scale is IP65 Rated
for water and dust
ingress protection. It can
withstand sprays of water
but do not fully submerge.
Unlevel Surfaces Air Currents
Radio Frequency
Interference
Vibration Extreme Temps
WAVE Washdown
Digital Scale with
Cover/Tray
Two AA
Batteries
Small Phillips
Head Scredriver
User Guide
Key Descriptions
UNIT
SET
UNIT Key
Bubble
Level
Battery
Level
Water/Milk
Mode
Auto-O
Indicator
Backlight
Indicator Weighing
Units
UP/DOWN
Keys
SET Key
Stability
Indicator
POWER/
TARE Key
Counting
Mode
POWER/TARE - Press to turn scale on. Press to re-zero
display. Hold to turn scale o.
UNIT - Press to change weighing unit. (see Counting
Function for “pcs” settings).
SET - Enters function settings menu.
UP/DOWN - Use to adjust setpoint and function settings.
(see Checkweighing Backlight)
Weighing Your First Item
1. Press the POWER/TARE key to turn the scale on.
2. Place the item on the center of
the weighing platform.
3. Take your reading from the
display. You can press the
UNIT key to convert between
weighing units:
g, ml ( water / milk ),
lb:oz, .oz ( water / milk )
4. The default Auto-O setting
will turn the scale o after 5
minutes of inactivity or you can hold the POWER/
TARE key to manually turn the scale o.
Radio Frequency
Interference
Unlevel Surfaces High Humidity
Air Currents Vibration Extreme Temps
HOLD
ON/OFF
MODE TARE
Auto-Off
Enabled
(180 sec)
Calibration
Auto-Off
Disabled
Tare Function
The Tare function allows you to subtract the weight of a
container so that the display only shows the weight of the
contents.
UNIT
SET
NOTE: The weight of the container will subtract from
the available capacity and will leave a negative value
on the display once the weight is removed. Press
POWER/TARE again to return the display to zero.
Counting Function
The counting function is used to accurately count items of
uniform weight such as beads or screws.
1. Press the UNIT key to change to “pcs” mode.
2. Press the SET key. The display will show “cnt”.
3. Press SET again. The display will show “Pc.25”.
4. Use the UP/DOWN keys to select between: 25, 50, 75
or 100 pcs then press SET to conrm.
5. Place a sample quantity of your items on the platform
matching the count you selected above.
6. Press the SET key to conrm the sample qty and set
the average piece weight (APW) in memory.
7. You may now place any quantity on the scale and
view the piece count. (‘pcs’ will show on the display)
Press the POWER/
TARE key to subtract
the container’s weight.
Add items to the
container to see their
weight on the display.
Place an empty tray
or container on the
platform.
Checkweighing Backlight
The checkweighing feature allows you to quickly check if an
item is within a set weight range using the programmable
backlight.
Graph showing weighing range
with example checkweighing setpoints
“LO” value “HI” value
0Max
BLUE (LOW) GREEN (OK) ORANGE (HIGH)
To change the HI/LO values or disable the backlight:
1. Press the SET key. The display will show “bl”.
2. Press the SET key. The display will show “bl-On”, for
“backlight on”.
3. You can use the UP/DOWN keys to toggle the
backlight ON or OFF. (Checkweighing requires bl-ON)
4. Press SET to conrm.
5. If backlight is set to ON, the scale will display “Lo”.
6. Press the SET key. The display will show the current
“Lo” or low value (default: 100.0g).
7. Use the UP/DOWN keys to change the low value.
8. Press SET to conrm. The display will show “HI”.
9. Press the SET key. The display will show the current
“HI” or high value (default: 1000g).
10. Use the UP/DOWN keys to change the high value.
11. Press the SET key to conrm. The scale is now ready
for checkweighing.
Accuracy
Your scale comes calibrated from the factory and most
users won’t need to calibrate their scale for a long time.
You should check your scale’s accuracy periodically using
calibration weights and perform calibration if necessary.
NOTE: Only use trusted calibration weights.
Household items such as bottles and cans with
weights printed on the side are not suitable for
checking accuracy as these values are approximate
and don’t include the container weight (Net Weight).
Calibration
Calibration adjustment is permanent and should
only be performed using accurate calibration
weights that match the requirements for your
scale (see the chart on back). Do not use coins or
other household items to calibrate.
1. Prepare the required weight for your scale. (5000g)
2. Find a at and level surface to perform calibration
and let the scale adjust to room temperature.
3. Press POWER/TARE to turn the scale on and wait for
the scale to stabilize.
4. Press and hold the SET key until the display shows
‘CAL’.
5. Make sure nothing is on the platform then press SET
to conrm the zero point.
6. The display will then ash the required calibration
weight. (5000g)
7. Place the required calibration weight on the center
of the platform.
8. The display will show
‘PASS’ then return to
normal weighing mode.
Auto-Off Timer
The default Auto-O setting will turn the scale o after
5 minutes of inactivity. To adjust the Auto-O Timer:
1. Press the SET key. The display will show “bl”.
2. Press the UP key. The display will show “APo”.
3. Press the SET key. The display will show “APo-0”.
4. Use the UP/DOWN keys to select between
0/5/10/20/30/40/50/60/90 minutes.
(0=Auto O disabled).
5. Press the SET key to conrm your selection and
return to normal weighing mode.
6. If there is no input for 60 seconds, the scale will
return to normal weighing mode automatically.
Specications
WA-5000-1-BK
Max Capacity
Range 1 (0-1000g): 1000g / 1000ml / 2lb:3.27oz / 33.814
.oz
Range 2 (1000.5-3000g): 3000g / 3000ml / 6lb:9.82oz /
101.44 .oz
Range 3 (3001-5000g): 5000g / 5000ml / 11lb:0.4oz /
169.07.oz
Readability
(Auto-ranging)
Range 1 (0-1000g): 0.1g / 0.1ml / 0lb:0.01oz/ 0.005 .oz
Range 2 (1000.5-3000g): 0.5g / 0.5ml / 0lb:0.1oz / 0.02 .oz
Range 3 (3001-5000g): 1g / 1ml / 0lb:0.1oz/ 0.05 .oz
Weighing
Units g, ml*, lb:oz, .oz* *(milk or water volume)
Dimensions
Overall: 8.0 x 5.5 x 1.8 in
Platform: 4.7 x 5.0 in
Display: 1.1 x 2.9 in
Calibration
Weight 5000g (sold separate)
Power 2 x AA Batteries (included)
Warranty 3 Year Limited Warranty
For more information, including
weighing tips and support, scan
this code with your smartphone
Or visit us online at
truweigh.com/support/
Indice
Altri manuali Truweigh Scala
Truweigh
Truweigh ECHO Manuale utente
Truweigh
Truweigh OMNI Manuale utente
Truweigh
Truweigh Xeno Manuale utente
Truweigh
Truweigh ENIGMA Manuale utente
Truweigh
Truweigh Note Manuale utente
Truweigh
Truweigh CLASSIC CL-100-01 Manuale utente
Truweigh
Truweigh MOXIE Manuale utente
Truweigh
Truweigh MOBI-650-1 Manuale utente
Truweigh
Truweigh TUFF-WEIGH Manuale utente
Truweigh
Truweigh HOOK Manuale utente
Truweigh
Truweigh GENERAL Series Manuale utente
Truweigh
Truweigh RIOT Manuale utente
Truweigh
Truweigh MOBI Manuale utente
Truweigh
Truweigh STORM Manuale utente
Truweigh
Truweigh Force Manuale utente
Truweigh
Truweigh ELEMENT Manuale utente
Truweigh
Truweigh LUX Manuale utente
Truweigh
Truweigh GAUGE Manuale utente
